Electronic Control Board WP61003425 | Official Whirlpool Part | Fast Shipping | PartSelect
Electronic Control Board – Part Number: WP61003425
Electronic Control Board – Part Number: WP61003425 Electronic Control Board – Part Number: WP61003425 Electronic Control Board – Part Number: WP61003425 https://partselectcom.azureedge.net/Schematics/Maytag/53161.gif

Electronic Control Board

Product Description

Electronic Control Board Specifications

This ice and water dispenser control board is a little over three inches long.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Not dispensing water

This part works with the following products:

Refrigerator.

This part works with the following brands:

Maytag, Jenn-Air, Kenmore.

Part # WP61003425 replaces these:

61003425.
Questions and Answers
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 8 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Stan from Clovis, NM
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP61003425
control board shorted out making it inoperative
removed ice and water dispenser to get to control board and removed two screws and electrical plug and two other wires and remove c/b then replaced c/b and all wiring and screws put it back togather in appro. 25 to30 mins.
18 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Carole from Magalia, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
WP61003425, WP61003421
water and ice dispenser would not work
I hired a repairman and it just took him a few minutes to take off the dispenser panel and install the parts. He put everything back and the green light came on. We drew out a couple of glasses of water and everything seemed to work fine. Then before he left he said "let's try it one more time". He put a glass under the water dispenser, pushed the button, something popped and would not work. He took the panel off again and checked the new part and the control board was burned out. It had a black mark on it. We don't know what happened and neither of us know how to find out what happened. Could you please help me. Thank you, Carole Prinz
17 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Wing from Stockton, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
12001991, WP61003425, WP61003407
Control board and fountain backet damaged by burned out solenoid.
Removed damaged fountain bracket by removing the torx screw using torx head screw driver. Install new control board and new solenoid onto the new fountain bracket using existing screws. Reinstall fountain bracket to the freezer door.
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Stephen from West Caldwell, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WP61003425, WB27T10272
F0 Error message - Oven won't heat
Removed front display panel by removing 3 screws with nut driver. Removed ERC control board from display panel by removing 2 screws. Labeled all wires according to the terminal description on the existing board (this is important as the new control board terminations are in different places than the existing one. Disconnected wires. Removed keying sleeve from 2 wires since the new control unit was keyed differently. Connected wires to the new control board. Re assembled board to display panel and panel to oven. Works great.
5 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Randall from Cleveland, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
WP61003425
Ice dispenser door would not open
I had previously ordered the solenoid and door kit. The instructions were very well done. The pictures were a bit blurred but have been recopied several times however were adequate to see approximates on where things were. I removed solenoid and replaced it and the door flapper for ice dispenser. No problems with any of that. I had to work with the spring a little, I should have paid more attention to how many times to wrap it for the correct tension. However the solenoid was not the problem. There was intermittent operation from the solenoid when I would jiggle the pc board. Probably has a bad solder joint on the board. I ordered a new board, it took only 10 minutes to replace it since I was familiar with taking the housing loose. Put it all back together and it's working great. There was no drawing or instructions with the pc board but there were in the solenoid kit I had gotten first.
I do highly recommend Parts Select. Parts were shipped promptly. Matter of fact when I ordered the pc board early on Monday. I received it Tuesday afternoon with just ground delivery.

Very Happy Customer. Thanks Parts Select.
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Kevin from Mukilteo, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
61004388, 61003458, 61003426, WP61003425, 61003408, WP9705445, WP61003286, 12001991
Fountain broken
Fried the new circuit board, dead short somewhere.
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Walter from MICKLETON, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WP61003425
ice dispenser lights were out. Would not dispense ice or water.
Removed 3 torx screws, used pliers to release control board clips and removed board. Unplugged old board and plugged in new board. Replaced cover and lights were back on.
Put cup under water dispenser and pushed for water. The control board immediately exploded and smoke came out. The board was burnt to a crisp just like the one I replaced.
Now I'm out over $200 bucks.
1 person found this instruction helpful.
Was this instruction helpful to you?
oliver from sebastopol, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Parts Used:
WP61003425, 61003411, WP61003407, 12001991
Ice dispenser main board was fried
I replaced the broken and fried parts. And everything works great now
1 person found this instruction helpful.
Was this instruction helpful to you?
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11743169
Manufacturer Part Number: WP61003425
Brand
Model Number
Description
Kenmore
61004752
Refrigerator
Kenmore
61004753
Refrigerator
Kenmore
61004754
Refrigerator
Jenn-Air
JCD2289AEA
Refrigerator - Side-by-side
Jenn-Air
JCD2289AEB
Refrigerator - Side-by-side
Jenn-Air
JCD2289AEF
Refrigerator - SIDE BY SIDE REFRIGERATOR
Jenn-Air
JCD2289AEG
Refrigerator - SIDE BY SIDE REFRIGERATOR
Jenn-Air
JCD2289AEK
Refrigerator - SIDE BY SIDE REFRIGERATOR
Jenn-Air
JCD2289AEQ
Refrigerator - Side-by-side
Jenn-Air
JCD2289AER
Refrigerator - SIDE BY SIDE REFRIGERATOR
Jenn-Air
JCD2289AES
Refrigerator - Side-by-side
Jenn-Air
JCD2289AEU
Refrigerator - SIDE BY SIDE REFRIGERATOR
Jenn-Air
JCD2289AEW
Refrigerator - Side-by-side
Jenn-Air
JCD2289ATB
Refrigerator - Side-by-side
Jenn-Air
JCD2289ATW
Refrigerator - Side-by-side
Jenn-Air
JSD2388AEA
Refrigerator - Side-by-side
Jenn-Air
JSD2388AEB
Refrigerator - Side-by-side
Jenn-Air
JSD2388AEW
Refrigerator - Side-by-side
Jenn-Air
JSD2588AEA
Refrigerator - Side-by-side
Jenn-Air
JSD2588AEB
Refrigerator - Side-by-side
Jenn-Air
JSD2588AEW
Refrigerator - Side-by-side
Jenn-Air
JSD2789AEA
Refrigerator - Side-by-side
Jenn-Air
JSD2789AEB
Refrigerator - Side-by-side
Jenn-Air
JSD2789AES
Refrigerator - Side-by-side
Jenn-Air
JSD2789AEW
Refrigerator - Side-by-side
Jenn-Air
JSD2789ATB
Refrigerator - Side-by-side
Jenn-Air
JSD2789ATW
Refrigerator - Side-by-side
Jenn-Air
JSD2989AEA
Refrigerator
Jenn-Air
JSD2989AEB
Refrigerator
Jenn-Air
JSD2989AEW
Refrigerator