Part Location Diagram of WP61003336 Whirlpool Ice Bin Drive Ring
See part 7 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Ice Bin Drive Ring WP61003336

 Fits your KRB18KN4W3!
★★★★★
★★★★★
1 Review

Rated by 14 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 47.73
  Special Order
 Fits your KRB18KN4W3!
PartSelect Number PS11743163
Manufacturer Part Number WP61003336
Manufactured by Whirlpool for Admiral, Maytag, Jenn-Air, Magic Chef
Product Description

Ice Bin Drive Ring Specifications

This drive ring is three inches in diameter. It is all white in color and is made of plastic. This ring is used with a refrigeraor's icemaker assembly.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice
This part works with the following products:
Refrigerator, Ice Maker.
Part# WP61003336 replaces these:
AP6009988, 61003336, 63017-1, 70027-2
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 14 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
Drive ring disintegrated
Removed all screws on back and 4 on front. That part is easy IF you have a Torx of the right size. Slip out the ice bin a bit and replace the drive ring. Reassembly is a bit harder since some internal shift can occur -- rotate or tilt the whole assembly to get two -- I think -- screws started. No need to over tighten screws; snug is good enough.
  • Joe from GRANTSVILLE, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice bin drive ring broke
Removed the screws that held the main ice bin and slid back the bin to leave space behind the auger to remove the broken ring. Replaced with new ring and replaced screws to hold ice bin back in place.
  • Boyd from North Fork, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ring was cracked and it would not dispence ice.
I switched the ring and still had the same problem. What caused the Drive ring to crack was the Ice maker drive was cracked also, when it filled with water it would tip. The ice was not freezing completely and would cause the ice to build up and the auger was froze with ice or a big piece of ice would jam it. So I replaced the Ice Tray, it is working like new. I have to buy another ice tray as inventory, although I know inventory is bad but I never agreed with that theory.
  • John from WALWORTH, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drive ring was cracked (power failure & froze-up when power came on)
I read what other people had done so I tried the easiest solution--Forced, without breaking, the plastic & fit the ring right where it needed to be.
  • Joseph from Colonial Heights, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice enclosure was broken
the drive motor was broken free from the tray, so I just changed it over and replaced the drive ring very esay for me
Other Parts Used:
Ice Enclosure Ice Bin Drive Ring
  • Christopher from St Petersburg, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Metal Augar Damaged End On Plastic Ring I
Removed drive assembly end of ice bin using socket wrench to get to old ice bin drive ring. Pull drive sssembly back to get ice bin ring out of the other end of ice bin. Installed new ice bin ring and and reinstall drive assembly end.
  • Anna from Parrottsville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no ice in bucket
looked a website removed part found broken item order and installed in 15 minutes, easy simple fix very low cost change

rl
  • Randall from ponchatoula, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic ring that is the connection between the drive motor at the back of the freezer compartment to the auger in the ice bin shattered when my wife was dispensing crushed ice.
Part selects cataglog for parts selection was very easy to use and the online service and delivery was great.
When I got the part, it was not apparent on how to remove the auger so that I could insert the new connector. There were about about 8 visible screws, with star drive heads that I fortunately had a screwdriver that fit, and I could not tell if I had to remove all of them or only a couple.
I ended up removing all, but still could not separate the dispenser portion which held the front of the auger from the back of the ice bin. I finally figured out that the dispenser door trip lever had to be disconnected and I almost lost it when I removed the metal clip that attached it to the outside of the ice bin when the spring loaded lever tried to unwind. I managed to hold it in place, separate the dispenser holding the auger from the rest of the ice bin and replace the connector. I them got the pieces back in place and was able to refasten the spring loaded lever and then replace the screws.
If the spring loaded lever had unloaded, it would have been tricky to try to replicate the amount of turns (load) on the spring tension.
  • Larry from Anchorage, AK
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker auger wouldn't rotate, motor worked fine
To replace the broken drive coupling on the motor end of the auger requires sliding the ice bin out of the freezer section of the refrigerator. Remove the ice cubes and let it thaw out for a few minutes. Remove five screws holding the front face on the ice bin to remove the ice auger. slip the new drive coupling over the end of the auger. reassemble and replace the face plate with the five screws. Slide the ice bin back in the freezer. Less than fifteen minutes it was finished.
  • Rob from Rome City, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old plastic ring was damaged due to leaking icemaker causing door to open when ice dispensed.
No tool required! Pulled out tray, emptied ice into large bowl for reuse. Pushed in and pulled from inside the coil springed auger until could get old plastic ring off and put new one on. Useing care not to apply too much pressure to ice dispensing end so as not to break housing. Have to turn auger assembly at an angle to compress enough and get old ring off. Needs a little physical strenth & care not to force plastic housing to breaking point. Worked great reused saved ice. Took less than 10 minutes
  • Matthew from Menifee, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Be the first to ask our experts a question about this part!

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743163
Manufacturer Part Number: WP61003336
Brand
Model Number
Description
Maytag
12001685
Ice Maker
Maytag
12001686
Ice Maker
Maytag
12001687
Ice Maker
Maytag
12001688
Ice Maker
Maytag
12001747
Ice Maker
Maytag
12001748
Refrigerator - Maytag Refrigerator Model 12001748 Parts
Maytag
12001749
Refrigerator - Maytag Refrigerator Model 12001749 Parts
Maytag
12001750
Refrigerator - Maytag Refrigerator Model 12001750 Parts
Admiral
19902-0A
Refrigerator - REFRIGERATOR
Admiral
19903-0A
Refrigerator - REFRIGERATOR
Admiral
19922-0A
Refrigerator - REFRIGERATOR
Admiral
19922-7A
Refrigerator - REFRIGERATOR
Admiral
19923-0A
Refrigerator - REFRIGERATOR
Admiral
19923-7A
Refrigerator - REFRIGERATOR
Admiral
19972-0A
Refrigerator - REFRIGERATOR
Admiral
19972A
Refrigerator - REFRIGERATOR
Admiral
19972B
Refrigerator - REFRIGERATOR
Admiral
19972C
Refrigerator - REFRIGERATOR
Admiral
19973A
Refrigerator - REFRIGERATOR
Admiral
19973B
Refrigerator - REFRIGERATOR
Admiral
19973C
Refrigerator - REFRIGERATOR
Admiral
19992A
Refrigerator - REFRIGERATOR
Admiral
19993A
Refrigerator - REFRIGERATOR
Admiral
20022-0A
Refrigerator - REFRIGERATOR
Admiral
20872A
Refrigerator - REFRIGERATOR
Admiral
20872B
Refrigerator - REFRIGERATOR
Admiral
21962A
Refrigerator - REFRIGERATOR
Admiral
21962B
Refrigerator - REFRIGERATOR
Admiral
21962C
Refrigerator - REFRIGERATOR
Admiral
22512-0A
Refrigerator - REFRIGERATOR
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service