Maytag/Maytag_Thumb/53867.gif
See part 10 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Lower Hinge Pin

★★★★★
★★★★★
9 Reviews
$7.09   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11743155
Manufacturer Part Number WP61003174
Manufactured by Whirlpool
Product Description

Lower Hinge Pin Specifications

This is a lower hinge pin for your refrigerator door. This hinge helps your door open and close easily by allowing it to pivot. You will need to replace your lower hinge pin if your refrigerator door will not open or close properly. This part is almost two inches high, one inch wide, and roughly two inches long. You will need a Phillips screwdriver and a 5/16 nut driver to replace this pin. It is made entirely of plastic and is all black.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door won’t open or close | Fridge too warm | Door Sweating
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Jenn-Air, Crosley, Admiral.
Part# WP61003174 replaces these:
AP6009981, 61003174
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Part Videos

Replacing your Maytag Refrigerator Lower Hinge Pin

Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 28 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The food side of my Maytag wide by side refrigerator was 80 degrees.
Okay all you ladies out there, listen up. Yep, I am a girl and had never worked on a refrigerator before. I googled the model of frig and the problem. Finding that one of two things were probably wrong, I went to parts select and ordered both parts. Two days later they arrived. I replaced the coil and thermostat and waited one day -- the food side still did not cool down. I replaced the frost board and immediately the unit started to cool. I had called a repairman on Saturday and was told that they couldn't make an appointment until the following Friday because of a tremendous work load. I had the refrigerator running by Thursday, the day before anyone could even take a look at my refrigerator. Even though I spent $30 on a part I didn't need, I saved a bundle, the house call would of been more than $30.
138 of 154 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower hinge (door closer) was worn out, so door wouldn't close on its own.
Simple. Removed all food and shelves from the door. Removed the top hinge, which allowed me to lift the door off the door closer. I layed it on the kitchen table on its front with the handle over the edge so it wouldn't cause a problem. Since I had it all apart I replaced both the top and bottom pieces of the door closer, and put a touch of grease on it. I then reassembled it in the reverse order. - The fountain spring and actuator pad were for a different problem with the fountain. It wouldn't shut off all the time because the actuator pad was getting stiff from time and use. I removed A/C power and turned off the water, then removed the front screws from the fountain cover. I then had easy access to the actuator pad, which only took a few minutes to replace. Careful when you pull the cover off, there are wires connected to it. Just don't forget to pull the plug out off the wall so you don't get killed!
  • Matt from Green Bay, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
17 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice machine motor broke from housing & fridge door lower hinge worn, so door is staying closed
Just pulled out ice bucket put to the side and then pulled out framed housing that surrounds the ice bucket tray and put on table
went in the rear where the turn motor is and disconnected the wires from the housing next to it and disconnected the motor which had cracked the wal it was mounted to and broke and fell which left a huge hole and the , took the 4 screws out and remounted it onto the new housing rear wall, note that to get the twist key lever that unscrews clock wise you may have to hit wit a hammer bluntly to brak it lose first then it unscrews easy, but this has to be done first before re assembly of the motor as it goes through the new housing wall , once this is donr then put your screw end through the hole and re assemble the wing devise back onto the moter screw drive which it will screw on counter clockwise and tap a few quick times to snug with a ball hamer or a small hammer, T
The hinge door pin is real easy, just unscrew the top of door 3 screwa and lift off the door set aside put new door pin hinge on then set the door back onto the pin hole align up and set it back down in the hinge hole and replace screws on the upper door hinge on top of fridge. all this took about 5 minutes tops, it took me more time to take all the items out of the doorway of my fridge that it did to do the task itself. Hope this could help.
  • David from Spring Hill, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    61005625, WP61003174
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door closer on refrigerator side was worn out
This was a very simpler repair to an annoying problem. First I removed the decorative cover on the top hinge pin of the door which was held on with one screw. I then removed the 3 screws of the top hinge pin with a socket, held the door in place with my hand and took off the top pin. Next, I simply lifted the refrigerator door off the bottom worn out hinge.
removed the old door hinge bracket and bottom lower hinge pin that had worn, placed the new bottom hinge pin in the bracket. Finally, on the bottom of the refrigerator I replaced the natural door closer held on by one screw. Lifted the door back onto the new bottom hinge pin, held the door in place and installed the top hinge pin, put the cover back on and the refrigerator is closing like it was new again.
  • Robert from Londonderry, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door was not shutting and sealing
took off door and replaced parts and replaced door
  • james from street, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door wouldn't close properly.
Removed top hinge cover. With nut driver, removed the three screws that held top hinge. Gently lifted door off bottom hinge and laid door across sawhorses. Once I saw what parts were worn on bottom hinge, removed them. Was a little confused from parts diagram online to what I had in my hand and needed to put back on door. After a few minutes realized I had ordered basically a duplicate part, "closer with cup", didn't need it. With a screw driver easily replaced new parts and reassembled the door. Works great.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door did not close by self the last 1/4 inch.
First I removed the top hinge cover plate. Then removed the three screws in the top hinge. I lifted the door off the lower hinge and laid the door on the kitchen counter. I removed the one screw holding the natural door closer part from the bottom of the door and installed the new part with the same screw. I then replaced the lower hinge pin with the new one. It just sets in place. I then repositioned the door and reinstalled the top hinge. the whole job took about 15 minutes after the refrig door had been emptied. The door works like new.
  • Robert from Virginia Beach, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
  • Parts Used:
    61003647, WP61003174
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator door would not close on its own and needed to be pushed
First we removed screws in the top hinge, then lifted the door up and off the bottom hinge. Replacement of the door closer and lower hinge pin took less than a couple of minutes. Then putting the door back on and screwing the top back on was nothing.

We additionally replaced the puriclean filter which simply was twisting it off and then the new one back on
  • Catherine from Vernon Hills, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door would not close and seal on it own
removed three nuts from the top of the door diconected the electrical connections for the ice and water in the door. Removed door by lifting it up about 2 inches, set it aside put new hinge pieces in placed put everything back together. writing this took more time. wanted to add, bought at 2 pm on thursday was at my house by 10am the next day
  • chad from st. Louis, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    61005726, WP61003174
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower hinge broke, causing the door to jump when open
It is the model with the french door. I unplugged it, removed two screws at the bottom of the door, while holding the door from sliding down. Removed the door and put it on its side. Removed one screw that was holding the hinge, removed the hinge and replaced it with the new one. Put the door back on (do not forget to reinstall the shims).
Did the same thing on the other door. After putting the door back on readjusted the height to level the door, using height adjustment screw. Lock the door in place. It now works better then new
  • Vadim from Flanders, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WP61003174
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
5.0
Filter By Rating:
  • 5 Stars
    9
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11743155
      Manufacturer Part Number: WP61003174
      Brand
      Model Number
      Description
      Amana
      ARS2760BW
      Refrigerator - Side-by-side
      Maytag
      AS2125CIHW
      Refrigerator
      Maytag
      AS2125SIHW
      Refrigerator
      Maytag
      AS2126PIHW
      Refrigerator
      Maytag
      AS2728GIHB
      Refrigerator
      Maytag
      AS2728GIHW
      Refrigerator
      Admiral
      ASD2120DRQ
      Refrigerator - Side-by-side
      Admiral
      ASD2120DRW
      Refrigerator - Side-by-side
      Admiral
      ASD2123DRA
      Refrigerator - Side-by-side
      Admiral
      ASD2123DRQ
      Refrigerator - Side-by-side
      Admiral
      ASD2123DRW
      Refrigerator - Side-by-side
      Admiral
      ASD2514ARA
      Refrigerator - Side-by-side
      Admiral
      ASD2514ARQ
      Refrigerator - Side-by-side
      Admiral
      ASD2514ARW
      Refrigerator - Side-by-side
      Maytag
      AZ2727GIHB
      Refrigerator
      Maytag
      AZ2727GIHW
      Refrigerator
      Crosley
      CS21A2A
      Refrigerator - Side-by-side
      Crosley
      CS21A2W
      Refrigerator - Side-by-side
      Crosley
      CS21A5DA
      Refrigerator - Side-by-side
      Crosley
      CS21A5DW
      Refrigerator - Side-by-side
      Crosley
      CS21B5DA
      Refrigerator - Side-by-side
      Crosley
      CS21B5DQ
      Refrigerator - Side-by-side
      Crosley
      CS21B5DW
      Refrigerator - Side-by-side
      Crosley
      CS21F2Q
      Refrigerator - Side-by-side
      Crosley
      CS21F2W
      Refrigerator - Side-by-side
      Crosley
      CS21F5DW
      Refrigerator - Side-by-side
      Crosley
      CS21G2Q
      Refrigerator - Side-by-side
      Crosley
      CS21G2W
      Refrigerator - Side-by-side
      Crosley
      CS21G5DQ
      Refrigerator - Side-by-side
      Crosley
      CS21G5DW
      Refrigerator - Side-by-side

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service