Maytag/Maytag_Thumb/35998.gif
See part 16 in the diagram
Replacing your Maytag Dishwasher Hinge Pin play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Hinge Pin

★★★★★
★★★★★
2 Reviews

Rated by 16 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your CDU450V!
 Fits your CDU450V!
PartSelect Number PS11743044
Manufacturer Part Number WP6-912678
Manufactured by Whirlpool
You May Also Need?
Product Description

Hinge Pin Specifications

Sold individually. This part is exactly 1 inch long.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Lid or door won’t close
This part works with the following products:
Dishwasher, Washer.
This part works with the following products:
Maytag, Jenn-Air, Magic Chef, Amana.
Part# WP6-912678 replaces these:
6-912678, 912678, Y912678
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Part Videos

Replacing your Maytag Dishwasher Hinge Pin

Replacing your Maytag Dishwasher Hinge Pin play video
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 16 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Drains but doesn't spin, door lock does not engage.
Door locked light did not come on and did not have 120 VAC across the Wax Motor. Also the Wax Motor did not extend out to make contact with the Door Lock, Spin Enable Switch. General guidance is to replace drive belt and to replace Wax Motor along with the Door Lock, Spin Enable Switches (total of two limit switches). This did not correct the problem. Checked for power and traced loss of power back to the Control Board where resistor R11 was found to be burnt out. Replaced Resistor with new Carbon Film unit, rating of 3.9 K-ohms, 1/4 W and 5%. As a prcaution, replace the Triac (manufactue part number NTE5657), component identified as Q6, rating of 0.8 Amp, 600 VAC. Semiconductor parts must be obtained from somewhere other than Parts Select (unable to find in the small town I live in, I located on the internet at Mouser.com). Unit works great now.
Other Parts Used:
Short Dispenser Door Retaining Pin Dispenser Bezel Door Lock/Spin Enable Switch Wax Motor Drive Belt and Motor Isolator Kit
  • richard from austin, MN
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
101 of 142 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the soap dispenser door broke off, I lost the pins and the spring.
The repair is fairly simple except that the diagram on the web site has an error - it reverses the positions of the long hinge pin and the short pin. I kept trying to do it as the diagram showed and of course it didn't work. Then I followed my instincts! The only other difficult part was figuring out which way to insert the spring but there are only a few options so trial and error was the simplest way.
Other Parts Used:
Short Dispenser Door Retaining Pin Detergent Cup Lid Spring Detergent Cup Lid
  • Bonnie from South Orange, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The pins on the soap dispenser somehow became disengaged and lost in a wash cycle.
It was difficult to use the guide provided online to determine what position to place the spring in. Finally I realized that the spring had to be placed with the tip that sticks out against the wall of the dishwasher to make the spring action work. The long and short pins were not a problem. How to place the spring was the main problem, but I finally figured it out. I did not need any special tools to accomplish this. I just used a kitchen knife to push the short pin into place.
Other Parts Used:
Short Dispenser Door Retaining Pin Detergent Cup Lid Spring
  • Coralie from Centennial, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bad pump
I took off the rear panel and removed the hose clamps and electrical terminals, slid pump out of slot in bottom pan of washing machine. It only took minutes, this was part of a major overhaul. I replaced this as a precautionary measure. Great prices and quick service,
Other Parts Used:
Short Dispenser Door Retaining Pin Dispenser Lid Door Boot Drain Hose Remote Style Pump with Motor - 120V 80W Dispenser Bezel Drive Belt and Motor Isolator Kit
  • Brandon from Berea, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top pin on dispenser door was rusted so the door would come off.
First I removed the 4 screws that kept the bezel in place, removed the bezel. Replaced the new bezel, replaced screws, put new top pin in door and put door on.
Other Parts Used:
Dispenser Lid Dispenser Bezel
  • Kathy from Tulsa, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The repair went really quick. My husband was able to do it in about 5 minutes. Also the service was amazing. We ordered the part and we got it 3 days later. I have no complaints about ordering from this company and am sure that If I need to get new parts in the future this is where I will get them.
There was 4 screws that held the bevel in that still needed to be removed from the old broken one. Once we removed those we were able to place the new bevel and lid in the correct sport, replace the screws and viola, perfect.
Other Parts Used:
Short Dispenser Door Retaining Pin Dispenser Lid Dispenser Bezel
  • Sarah from Ephraim, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door lock wasn't working
There were two parts to the repair - the Dispenser Lid and Bezel was easy - I did it myself.
My wife, who normally would try to do the repair of the door lock herself has been very busy with her condo rental business. It took six weeks to get her to order the parts and then they sat in the box for two weeks before I convinced her to call her appliance repair company she uses for the renatl condos. They did a quality job for only $79.00. When my wife saw what he had to be do to repair the locking mechanism, she was convinced we made the right decision. The Maytag washer is working like new after weeks of manually adjusting the door latch, sometimes a dozen times, before it would lock and do a high speed spin.
Other Parts Used:
Short Dispenser Door Retaining Pin Screw Dispenser Lid HOOP- LOCK Door Hoop Ramp Dispenser Bezel SUPPORT- L SPRING- LA
  • Carolyn from Panama City Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Soap Dispenser Lid came off.
At first I tried putting the spring into the lid where the shorter extension of the spring fit tightly into the recessed part of the lid. (If you look at the lid where the hole is for the spring and pin, you see that there is what looks like the arm of the letter "Q".) This worked, but the lid would only open with limited force and would hang down when the dishwasher door was closed.
After looking at it again, I positioned the spring so that the shorter extension of the spring ran through the partially open portion of the spring hole. (Looking at the cup laying flat on the ground, you see that the bottom of the pin/spring hole has a slit in it). This allowed the spring to have greater tension and I have had no more problems. The lid opens with force and stays closed when the dishwasher door is closed (vertical).
This may be a little confusing as I do not know the technical terms for any of this stuff, but I just mess with stuff til it works or breaks, whichever comes first! haha
Other Parts Used:
Detergent Cup Lid Spring
  • Todd from Richmond, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fabric softner, and bleach dispenser not working
First off, unplug the machine.
Next remove the existing screws in the plastic dispenser. Then remove the door, there are two screws holding the door on connecting two brackets which need to be lifted to get them to release.
That gives you the access to the remove the front panel, which is done by pulling on the panel itself.
Once that is done you need to remove the two screws that are in the corners upper left, and right that are holding the brackets that hold down the top of the machine. Remove the brackets by gently turning them.
Once done the lid should easily lift up.
The dispenser can then be disconnected by removing the 2 rubber hoses on top and the the larger rubber hose on the bottom along with the electrical connections under the unit. Keep track of which wire goes to which lead.
After removing the dispenser just do everything in reverse.
The machine is like new, and the repair took about 45min and saved me at least $200 dollars.
Other Parts Used:
Short Dispenser Door Retaining Pin Dispenser Lid Screw Dispenser Bezel
  • anne from gaston, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The detergent lid and pins came loose and the small parts were lost
Went on line to find the part numbers, ordered complete replacement. Simply put the stuff together and replaced the whole cup lid.
Other Parts Used:
Short Dispenser Door Retaining Pin Detergent Cup Lid Spring Detergent Cup Lid
  • Alan from Burien, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743044
Manufacturer Part Number: WP6-912678
Brand
Model Number
Description
Amana
ADW662EAB
Dishwasher
Amana
ADW662EAB-PADW662EAB0
Dishwasher - Amana Dishwasher Model ADW662EAB-PADW662EAB0 (ADW662EABPADW662EAB0, ADW662EAB PADW662EAB0) Parts
Amana
ADW662EAC
Dishwasher
Amana
ADW662EAC-PADW662EAC0
Dishwasher - Amana Dishwasher Model ADW662EAC-PADW662EAC0 (ADW662EACPADW662EAC0, ADW662EAC PADW662EAC0) Parts
Amana
ADW662EAS
Dishwasher
Amana
ADW662EAW
Dishwasher
Amana
ADW662EAW-PADW662EAW0
Dishwasher - Amana Dishwasher Model ADW662EAW-PADW662EAW0 (ADW662EAWPADW662EAW0, ADW662EAW PADW662EAW0) Parts
Amana
ADW862EAB
Dishwasher
Amana
ADW862EAC
Dishwasher
Amana
ADW862EAS
Dishwasher
Amana
ADW862EAW
Dishwasher
Magic Chef
CDB3100AWE
Dishwasher
Magic Chef
CDB3100AWT
Dishwasher
Magic Chef
CDB3100AWX
Dishwasher
Magic Chef
CDB6100AWE
Dishwasher
Magic Chef
CDB6100AWN
Dishwasher
Magic Chef
CDB6100AWX
Dishwasher
Crosley
CDC400B
Dishwasher
Crosley
CDC450B
Dishwasher
Crosley
CDC5J
Dishwasher
Crosley
CDC610B
Dishwasher
Crosley
CDU20J
Dishwasher
Crosley
CDU250B
Dishwasher
Crosley
CDU250V
Dishwasher
Crosley
CDU2J
Dishwasher
Crosley
CDU2J3
Dishwasher
Crosley
CDU400B
Dishwasher - Undercounter
Crosley
CDU450B
Dishwasher
Crosley
CDU450V
Dishwasher
Crosley
CDU510B
Dishwasher

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service