Install videos!
Easy
11743044-1-M-Whirlpool-WP6-912678-Hinge Pin
Part Location Diagram of WP6-912678 Whirlpool Hinge Pin
See part 16 in the diagram
Replacing your Maytag Dishwasher Hinge Pin
11743044-1-S-Whirlpool-WP6-912678-Hinge Pin 360 view
( Grid squares measure 1x1 inch )
11743044-1-S-Whirlpool-WP6-912678-Hinge Pin 11743044-2-S-Whirlpool-WP6-912678-Hinge Pin 11743044-1-S-Whirlpool-WP6-912678-Hinge Pin 360 view
Part Location Diagram of WP6-912678 Whirlpool Hinge Pin Replacing your Maytag Dishwasher Hinge Pin
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Hinge Pin WP6-912678

★★★★★
★★★★★
2 Reviews

Rated by 16 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Easy 

15 - 30 mins 

Rated by verified customers 

?
$ 10.62
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11743044
Manufacturer Part Number WP6-912678
Manufactured by Whirlpool for Maytag, Jenn-Air, Magic Chef, Amana

Jump to:

Product Description

Hinge Pin Specifications

Sold individually. This part is exactly 1 inch long.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Dishwasher Hinge Pin

Replacing your Maytag Dishwasher Hinge Pin
Back to Top
Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Lid or door won’t close
This part works with the following products:
Dishwasher, Washer.
Part# WP6-912678 replaces these:
6-912678, 9-12678, 912678, Y912678
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Julie K - December 19, 2018
  Verified Purchase
Easy repair
The part came fast and was super easy to install in just minutes. A lot cheaper than buying a new dishwasher. Very satisfied customer.
★★★★★
★★★★★
Kenneth D - January 1, 2019
  Verified Purchase
Worked like a charm
My drier needed both a long and short hinge pin. Perfect match.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 16 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer banged loudly on spin cycle. Inspection revealed broken dispenser bezel was cause
The soap dispenser is held to the washer body by means of the bezel and four screws. In my case, the bezel had broken at two corners, allowing the soap dispenser to bang around during spin cycle. In addition, the dispenser lid had broken off, and the hinge pins were missing. NO PROBLEM! Step 1: Remove (and save) four Phillips head screws, and discard broken bezel and lid. Step 2, Using old screws (or new ones from the hardware store -- just make sure they are stainless steel), fasten bezel to soap dispenser at all four corners. Don't over-tighten. Just make it snug. Step 3: Insert short pin in short socket in lid, and slide long pin into the long socket -- the one open at both ends, with a groove to allow it to slide back and forth. Step 4: Seat the short pin in the rear socket in the bezel, slide the long pin inward allowing the lid to seat into the bezel, and then (using screwdriver) gently push the long pin through and slide it into the front socket in the bezel, forming a hinge. DONE! No more banging. This 15-year-old washer should be good for many more loads. Thank you, !
Read less
Other Parts Used:
Short Dispenser Door Retaining Pin Hinge Pin Dispenser Lid Dispenser Bezel
  • D Brooks from CALIFORNIA, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Need new lid for detergent cup
Be sure to check for all parts you will need for repair.I didn't realize I needed to get the pins, springs for lid separately when I ordered the lid. So had to have two orders-but the installation was easy-husband did it.
Other Parts Used:
Hinge Pin Short Dispenser Door Retaining Pin Detergent Cup Lid Spring
  • Barbara from Clarkston, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door lock wasn't working
There were two parts to the repair - the Dispenser Lid and Bezel was easy - I did it myself.
My wife, who normally would try to do the repair of the door lock herself has been very busy with her condo rental business. It took six weeks to get her to order the parts and then they sat in the box for two weeks before I convinced her to call her appliance repair company she uses for the renatl condos. They did a quality job for only $79.00. When my wife saw what he had to be do to repair the locking mechanism, she was convinced we made the right decision. The Maytag washer is working like new after weeks of manually adjusting the door latch, sometimes a dozen times, before it would lock and do a high speed spin.
Read less
Other Parts Used:
Hinge Pin Short Dispenser Door Retaining Pin Screw Dispenser Lid HOOP- LOCK Door Hoop Ramp Dispenser Bezel SUPPORT- L SPRING- LA
  • Carolyn from Panama City Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drains but doesn't spin, door lock does not engage.
Door locked light did not come on and did not have 120 VAC across the Wax Motor. Also the Wax Motor did not extend out to make contact with the Door Lock, Spin Enable Switch. General guidance is to replace drive belt and to replace Wax Motor along with the Door Lock, Spin Enable Switches (total of two limit switches). This did not correct the problem. Checked for power and traced loss of power back to the Control Board where resistor R11 was found to be burnt out. Replaced Resistor with new Carbon Film unit, rating of 3.9 K-ohms, 1/4 W and 5%. As a prcaution, replace the Triac (manufactue part number NTE5657), component identified as Q6, rating of 0.8 Amp, 600 VAC. Semiconductor parts must be obtained from somewhere other than Parts Select (unable to find in the small town I live in, I located on the internet at Mouser.com). Unit works great now.
Read less
Other Parts Used:
Hinge Pin Short Dispenser Door Retaining Pin Dispenser Bezel Door Lock/Spin Enable Switch Wax Motor Drive Belt and Motor Isolator Kit
  • richard from austin, MN
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
103 of 144 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bad pump
I took off the rear panel and removed the hose clamps and electrical terminals, slid pump out of slot in bottom pan of washing machine. It only took minutes, this was part of a major overhaul. I replaced this as a precautionary measure. Great prices and quick service,
Other Parts Used:
Short Dispenser Door Retaining Pin Hinge Pin Dispenser Lid Door Boot Drain Hose Remote Style Pump with Motor - 120V 80W Dispenser Bezel Drive Belt and Motor Isolator Kit
  • Brandon from Berea, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the spring and long pin was gone
installed the pin and spring and then installed the lid with the spring in the correct position to keep the lid open under slight spring pressure. The spring is not a compression spring but a torsion spring.
Other Parts Used:
Hinge Pin Detergent Cup Lid Spring
  • Ron from Cottonwood Heights, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top pin on dispenser door was rusted so the door would come off.
First I removed the 4 screws that kept the bezel in place, removed the bezel. Replaced the new bezel, replaced screws, put new top pin in door and put door on.
Other Parts Used:
Hinge Pin Dispenser Lid Dispenser Bezel
  • Kathy from Tulsa, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Dispenser, rusted out, pins missing
Easy, took out old dispenser, and put in a new clean one. Really easy.
Other Parts Used:
Hinge Pin Dispenser Lid Dispenser Bezel
  • Milton from portland, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dispenser Bezel broken around screws
Removed 2 of 4 the screws that were holding the Dispenser Bezel in place. Removed the broken Dispenser Bezel and the other 2 screws. Cleaned the 4 screws (remove the detergent) cleaned the inside of the Dispenser area. Assembled the Dispenser lid /bezel assy. Secured the lid / bezel assy to washer with the 4 screws. Installed the syphon cup and syphon cap.
Read less
Other Parts Used:
Short Dispenser Door Retaining Pin Hinge Pin Dispenser Lid Dispenser Bezel Syphon Cap Syphon Cup
  • Richard from Watauga, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The detergent lid and pins came loose and the small parts were lost
Went on line to find the part numbers, ordered complete replacement. Simply put the stuff together and replaced the whole cup lid.
Other Parts Used:
Short Dispenser Door Retaining Pin Hinge Pin Detergent Cup Lid Spring Detergent Cup Lid
  • Alan from Burien, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Short Dispenser Door Retaining Pin
$5.81
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743044
Manufacturer Part Number: WP6-912678
Brand
Model Number
Description
Amana
ADW662EAB
Dishwasher
Amana
ADW662EAB-PADW662EAB0
Dishwasher - Amana Dishwasher Model ADW662EAB-PADW662EAB0 (ADW662EABPADW662EAB0, ADW662EAB PADW662EAB0) Parts
Amana
ADW662EAC
Dishwasher
Amana
ADW662EAC-PADW662EAC0
Dishwasher - Amana Dishwasher Model ADW662EAC-PADW662EAC0 (ADW662EACPADW662EAC0, ADW662EAC PADW662EAC0) Parts
Amana
ADW662EAS
Dishwasher
Amana
ADW662EAW
Dishwasher
Amana
ADW662EAW-PADW662EAW0
Dishwasher - Amana Dishwasher Model ADW662EAW-PADW662EAW0 (ADW662EAWPADW662EAW0, ADW662EAW PADW662EAW0) Parts
Amana
ADW862EAB
Dishwasher
Amana
ADW862EAC
Dishwasher
Amana
ADW862EAS
Dishwasher
Amana
ADW862EAW
Dishwasher
Magic Chef
CDB3100AWE
Dishwasher
Magic Chef
CDB3100AWT
Dishwasher
Magic Chef
CDB3100AWX
Dishwasher
Magic Chef
CDB6100AWE
Dishwasher
Magic Chef
CDB6100AWN
Dishwasher
Magic Chef
CDB6100AWX
Dishwasher
Crosley
CDC400B
Dishwasher
Crosley
CDC450B
Dishwasher
Crosley
CDC5J
Dishwasher
Crosley
CDC610B
Dishwasher
Crosley
CDU20J
Dishwasher
Crosley
CDU250B
Dishwasher
Crosley
CDU250V
Dishwasher
Crosley
CDU2J
Dishwasher
Crosley
CDU2J3
Dishwasher
Crosley
CDU400B
Dishwasher - Undercounter
Crosley
CDU450B
Dishwasher
Crosley
CDU450V
Dishwasher
Crosley
CDU510B
Dishwasher
Back to Top
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 9pm EST

Contact Customer Service
Hinge Pin
$ 10.62
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.