This roller shaft is also known as a support roller shaft or a drum roller axle, and is a part for your dryer. The function of this piece is to act as the axle for the drum roller; it provides a place for the roller to spin. The tools required for this repair are a stubby Phillips screwdriver, a 5/16 nut driver, a pair of snap ring pliers, and a 9/16 wrench. The first step before replacing this part should be to disconnect your dryer from the power source.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lewis S - January 30, 2021
Verified Purchase
Easy repair parts worked great.
Excellent parts perfect fit.
★★★★★
★★★★★
Justin B - May 5, 2020
Verified Purchase
Quick and easy
Exact part i order fast shipping
★★★★★
★★★★★
Scott O - July 10, 2019
Verified Purchase
Maytag parts
Received both parts in separate packages. both parts were scorned and in need of attention with steel wool. I had to get them back to like new condition.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 93 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer started to sound like someone was beating a dog in the laundry room.
The dryer model was on a sticker inside the door which had long ago rubbed off. The most difficult part was figuring our how to dismantle the dryer. I finally looked up the matching washer by model number watched a youtube video and the dismantle was the same....take off the door, remove front cover then remove screws that held the hook
... Read more brackets that held the top down. After we figured that out the rest was pretty easy. The main issue was the Idler Pulley Wheel and Bearing. We decided to replace the rest of the parts because we already had the thing all apart. It is amazing all the lint that gets into the dryer cabinet and passed the lint filter. Dryer works like new again. I love this set and will keep repairing as long as we can get parts.
The support rollers were fried, literally. I'm honestly surprised they held on. Let's just say that the "roller" part wasn't even attached to the support wheel... That bad. Because there wasn't much support there is a small tear in the metal on the back drum. The felt seal for the drum had basically been worn down to pieces. So I order tw
... Read moreo drum support rollers, two roller shafts, a new drum felt seal, and a new rib belt.
After the repair, no more squeaking, literally a huge difference, and because of there's plenty of support now for the drum, there isn't any clothes being torn. If it weren't for the videos and the parts, we would of spent hundreds of dollars on a new dryer. Instead we spent just over $100 and now our dryer is quiet and operating better than when we got it.
Followed the directions of the video and all went smooth. Cleaning the lint and parts was the more time consuming than the actual repair. 30 minutes for the repair and an hour for the clean. All and all very easy.
Dryer emitted a squeaky noise every time it started
We inherited this dryer three years ago upon purchasing our current house. At that time I found this website to purchase and install a couple of the baffles that were missing. This time, I checked the troubleshooting for my current problem and ordered all of the parts I felt I needed to resolve the problem. Once I received the parts, I
... Read more followed the great how-to videos by Steve to disassemble the front of the dryer and remove the drum. I could not get to the repairs right away since the interior of the dryer was quite dirty and I took a lot of time to clean it out. Once I got to removing and replacing the drum rollers, idler pulley, rear drum felt shaft, and drum belt, everything went smoothly and was just as easy as Steve described in the videos. If I didn't have such a dirty machine interior, removing the old parts and installing the new parts would have taken less than an hour. I had to hold off on installing the front glide kit and front drum felt seal since I forgot to order two of each (I'll install these at a later date. I proceeded to putting everything back together and testing the dryer. The dryer now runs quietly and works great.
I followed all of the instructional videos and things went very smoothly. Easy to follow. I replaced several other parts to avoid having to do other repairs later. I hope this should get us another 20+ years from this dryer.
This website is awesome. After imputing my dryer model I was able to select from the list if symptoms my issue...Dryer will not start. From there was percentage of issues that would cause my issue. After determining it was the motor (after 25 years who would have thought that!!!). In this process I discovered other non related issues that
... Read more i should attend to. So I basically rebuilt the dryer and it worked right away. I am retired military and in the tax preparation/representation business now, so a lot of this was new to me. The detailed instruction and especially the videos provided foolproof methods to complete each of the repairs. It was a little time consuming but very easy to complete. I did gain some new tools and diagnostic equipment that will come in handy in the future. Now I am going to tackle my daughters dishwasher. Thank you Parts Select and Steve (on the videos). John Beazle
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
6 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud squealing noise
Disassembled dryer and replaced drum support roller and shaft. That took care of the noise but I still replaced the belt and idler pulley while I had it apart.
Went smoothly. Took the opportunity to vacuum out entire cabinet. Also removed tumbler vanes inside dryer as coins had made their way into them. The only other suggestion I have is that I didn't notice cabinet screws were different lengths till I started reassembly. Might be smart to label and separate them
Replaced damaged parts and recommended parts normally causing the problem. Dryer is working again like new. I expended $112 rather than $600 for a new equipment. Good deal!
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ian
July 20, 2017
I had to replace my drum motor belt not too long ago but now when I turn on my dryer it makes a loud screeching noise and then fades out after about 5 mins … do you think it is the drum support rollers? Don’t want to just guess around lol
Hello Ian, it does sound like you have a problem with either your drum support rollers or your idler pulley. We recommend first checking the rollers as that is the most common reason for loud screeching noises. Check them for wear and visible damage. The next step should be the idler pulley. Please let us know if you have any further questions!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Andy
July 20, 2017
Me and my partner are venturing to replace the support rollers and the tumbler bearing kit and the drum belt. Do we need to replace the roller axel too? Thx
Hello Andy, first we recommend buffing out the axels with an emery cloth instead of replacing them if they are still in good condition. Then you should lubricate the roller bearing at the center opening, and the shafts with a few droplets of turbine oil. If you are replacing the idler pulley assembly you can repeat this process. Once this is all done you can start your installation. Best of luck with this repair!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Gigi
July 20, 2017
Is this for a new or old style dryer? TIA
Hi Gigi, from what we can find this unit was most likely manufactured in the late 80’s to the early 90’s. I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Ann
March 13, 2020
Dryer is working fine but rattles loudly like there are worn out ball bearings. No screeching, just the rattle. Which parts need replacing?
For model number DE312
Hello Ann, thank you for your question. That sounds like a drum roller and shaft issue. We would recommend replacing the rollers PartSelect Number: PS1570070 and the shafts PartSelect Number: PS11743031. You would want to order 2 of each part. I hope this helps.
So I removed the belts to check the pulleys. The motor pulley looks fine but it’s the motor shaft that the pulley goes on that is squeaking. Is that shaft replaceable? Or can I just oil or grease the shaft? Or do I need to replace the motor? ??
For model number LAT8204AAE
Hello Debra, thank you for your question. We have researched your model and found that the shaft is not replaceable and you need to replace the complete Motor Assembly, part number PS2003768. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Dryer is very loud thumping - when turning
Sounds like a log or two is being tumbled
Clothes drying fine though
For model number LDE8706ADE
Hello Connie, thank you for reaching out. When the drive belt gets worn out or frayed, it often creates a thumping noise. We would recommend checking the drive belt, part number PS11757542, to fix the issue. Good luck with this repair!
