This washing machine drain pump is intended for use with automatic washers that have been manufactured since 1958. The pump itself is made of plastic, though it does come with a metallic belt pulley.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Aaron C. R - April 27, 2023
Verified Purchase
Great product.
Exact replacement for my machine and easy to install
★★★★★
★★★★★
Ronald L - February 3, 2022
Verified Purchase
Easy repair
The wash machine work great with this part
★★★★★
★★★★★
Brandon J - March 21, 2021
Verified Purchase
Easy repair quick service
The part was in great condition and is back in working order.
★★★★★
★★★★★
Adelaide J - June 21, 2020
Verified Purchase
easy replacement
40-year-old maytag washer back to good as new
★★★★★
★★★★★
Teddy S - May 30, 2020
Verified Purchase
Exact fit and easy to replace
The part was exactly the same, good part and easy to replace. Only problem was the delivery. Took more days than it was suppose to be delivered by
★★★★★
★★★★★
David E - May 14, 2020
Verified Purchase
Perfect & Easy Replacement
I thought this part may be the cause of our leak. Price was reasonable so I took a chance. Having the video helped to see where it was and how to replace. Part came quickly and after a few minutes of work, our washing machine was fixed!! Super Happy!!!
★★★★★
★★★★★
Timothy B - August 13, 2019
Verified Purchase
Simple repair
Took 20 minutes to change out the pump! So far it is working as designed!
★★★★★
★★★★★
Rodney W - May 18, 2019
Verified Purchase
Woks as good as original, shipping great
Just wish new screws/bolts came with pump.
★★★★★
★★★★★
John P - May 13, 2019
Verified Purchase
The drain pump that I received from PartSelect was an exact fit.
I installed the drain pump according to the video and it has been working perfectly. So far, my experience with PartSelect has been wonderful.
★★★★★
★★★★★
Mark P - March 19, 2019
Verified Purchase
Great pump, but that wasn’t the problem.
Perfect pump. Easy installation. But problem turned out to be siphon-break valve on the drain line. Ordered that part now.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 25 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The old pump was beginning to drag due to the age of the washer.
Removed the front panel. Then blocked up the front of the machine. Removed the pump belt. Removed the 3 5/16" screws from the bottom of the old one and tilted it slightly to remove. Put the new one in and reinstalled the 3 screws. Put the belt back on and slid new pump all the way to the right and tightened 1 screw. Loosened the screw
... Read more until there was about 1/4" of gap when squeezed the belt together. Tightened the one screw, then the other 2. Put the front panel back on and lowered the machine. New pump works great.
Read less
Howard from ALBRIGHT, WV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
waterpump leaked where plastic housing upper and lower halves were bonded
new replacement water pump leaked where plastic housing upper and lower halves were bonded, presumably with glue. As a quick fix I wrapped pump with some 3M 4411N sealing tape. Seems to have stopped or really slowed leak. I was going to get another new pump but now worried it will leak as well so going to see how long tape fix works..
William from ANNAPOLIS, MD
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking pump
Tilt the washer sideways. Remove belts,Remove front panel, loosen two hoses, loosen three small nuts. Take out old pump and install new new pump vise versa. Video provided by partselect very helpful.
Water won't drain, slight water leak, unbalances frequently
My washer was sitting in a safety drain pan which made it difficult to work on due to the height of the pan walls. Managed to tilt it back and support on blocks well enough to access underside. Found two of the four leveling feet had fallen off, which was the ultimate cause of the problems from the cumulative effect of running unbalanced
... Read moreover time. Reinstalled these feet and had to remove rust to do so. I added two more nuts to the front feet to hold the adjustment tight. After adjusting to level, washer ran great and was no longer prone to unbalance. Procedure: Remove front panel- two lower screws and pry/pull off. Remove hoses at pump. Remove 3 mounting screws from pump. Remove belt from pump pulley. Push motor towards center of washer to release tension from other belt, and remove belt. Replace with new belt. Replaced old drain hose to pump and replaced all hose clamps with new. Install pump, replace pump belt. Level the washer. Replace front panel. Take the opportunity while the washer is open to clean out the dust from inside!
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a Burning Rubber smell, along with water leaking from the bottom of machine.
I propped up the machine. Turned the water off .took the pump belt off, then took the two hose clamps off. With a bucket and towels on hand for left over water in the hoses, i removed the two hoses. Then removed three screws that held the pump on. Installed the new pump in reverse order.
Alan from CUMMING, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer stopped draining
Removed wet close and removed 99% of all the water with a simple sifon hose and sponges. Diconnected electric and water supply hoses. Layed washer on its back. Removed front of washer. Disconnected hoses to water pump and checked for blockage. None. You need to capture the risidual water from the hoses and the pump if you are working
... Read morein an area that cannot tolerate spills. Pulled pump out (three screws) put a screwdriver and blocked the pump impellar and rotate the punps pully. Pully rotaded freely so the pump is bad. The two belts were pretty worn out so I replaced them also. Hooked up everything in reverse. Adjusted the tension of the belts as required. The drive belt for the pump should be pinched to 1/4". Checked the moter glides also. Put everything back together, checked for leaks and did a load of wash. Everything good. Dismanteling and diagnostics and clean up took about 30'. Assembly took another 30'. Purts fit perfectly.
I replaced the 3 screws because they were rusty. Then I replaced the Drain pump
George from BERKELEY, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was not draining completely & at times a small amount of water would leak from under the washer.
Followed the instructions on-line. Pulled the washer out from the wall, tipped it back about 45 deg. & removed the two philips screws as the base of the front of the washer.Removed the old belts which showed little wear, disconnected the hoses from the pump. Replaced the pump which was held in by only 3 nut-head screws, attached the bel
... Read morets & adjusted the tesnion as described on the website.
Received drain pump by fed ex, put it on in 15 minutes. . . My wife was very happy again. . . .
DAVID from LAKE CYRSTAL, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gerry
October 14, 2017
The pump pulley came off the washer. Is this a factory mounted pulley attached to the pump permanently or is it attached by a bolt? Can i just bolt it back on or would i have to replace the entire pump assembly? Thank you.
For model number Maytag lse7806acq
Hello Gerry, thank you for contacting us. You would need to replace the whole pump as that pulley is not sold separately or removable. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
April 27, 2018
When the belt is disconnected will the water pump turn freely or with some resistance?
For model number A712
Hi Richard, Thank you for the question. The pump should turn freely with a bit of resistance but should still be fairly easy to turn. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Milton Ahner
August 29, 2017
Does the pump in this model wash machine control the water staying in the tub as its filling? Is there any chance that the drain could siphon the water out of the tub as its filling, or is there a check valve to hold water in the tub?
For model number A512S serial no. 171539
Hi Milton,
Thank you for the question. I would start by making sure you do not have a siphoning issue.
First check to make sure the drain house is not pushed into the home drain. Then check to make sure the home drain is not plugged or blocked. Some people stuff a rag or paper towel around the gap between the hose and the drain hole thinking it will make the hose fit into the home drain more secure. There needs to be air flow between the drain hose and the outside diameter of the drain hole.
It is also a good idea to check the Siphon Break Kit and the Siphon Break Elbow Kit with Clamp. Make sure they are not cracked or damaged or nothing could be blocking them.
Hope this helps!
Q#1 how old is my machine? It's actually my moms and i'm trying to help her either fix or replace her machine.Q#2 it was overloaded with a big comforter and just stopped doing anything after emitting a burning belt smell, i want to diagnose the problem but the tub is really full of water. how do i get the water out, so i can figure out what's wrong without spilling water everywhere?
thank you for your support ;-)
For model number LAT7304AAE
Hello Ross, Thank you for contacting us. Please submit a follow up including the serial number of the unit so we can determine the age. If unplugging the unit and plugging it back in after 1-2 minutes does not force the water to drain, try to move the timers into the spin cycle so it can drain. If that fails then you would have to manually empty the water. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ross
February 26, 2019
This is a followup question. How old is my Maytag washer? Serial # is a0132943ks
For model number LAT7304AAE Maytag washer
Hello Ross, Thank you for the question. According to the serial number this product may have been manufactured August of 1994. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Linda
May 10, 2019
Hi, i have a problem i hope you can help me with. My washer will not complete a cycle. It agitates fine. But when it starts into the spin cycle, it starts then promptly stops. I don't have a meter. Please help!
For model number LAT8240AAW
Hi Linda, thank you for your question. When you appliance will not advance there are a few parts that you should check. You should take a look at your lid switches and your timer itself. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nancy
January 25, 2019
When washer goes to spin the hose connecting to water pump collapse and won't drain, could it be the pump or the hose.
For model number mat12PDLAW
Hi Nancy,
Thank you for your question. If the hose is collapsing, it may not be fastened tightly. This can restrict water flow and increase the pressure on the hose. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
December 12, 2017
My machine leaks a small amount of oil. Do i need to worry about it running out of oil
For model number A107A
Hi Joe,
Thank you for your question. Yes, eventually you would run out of oil in your machine. How fast that occurs depends on how much oil you are leaking. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry Lund
February 11, 2018
Clothes are still extremely wet after spinning. I have replaced belts, spring kit. If i pull the motor towards the front of the machine, (you can hear and see it spinning faster), during spinning it spins out the water fine, so do not think its the drain pump. Any help will be very appreciated
For model number LAT9706AAE
Hello Terry, thank you for your question. There is a speed control switch on the control panel that might be stuck, or not functioning. I would recommend checking that part first, and if that part is functioning properly you might want to check and/or replace the motor, and drain pump. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doug
July 12, 2023
Washer leaks water while spinning/draining and even when.letting clothes sit in the soak cycle and lifting the lid for awhile. Starting to get loud as if a bearing is failing as washer spins to drain. I haven’t been able to pull the washer out and look closer but I suspect the drain pump could be an issue along with the main tank seal/bearing. Any suggestions on anything else to look at or replace?
For model number LAT2500AAE
Hello Doug, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the tub bearing kit, part number PS2347235, to fix the issue. The tub bearing kit is fastened in the middle of the outer tub of your washer. The tub bearing ensures the inner tub is spinning effortlessly. If the rub bearing is faulty, it might leak water and become noisy. We hope this helps, good luck with this repair!
