Quick Question!

Have you ever purchased from PartSelect.com before?

https://www.partselect.com/Schematics/Maytag/55512.gif
See part 7 in the diagram
https://www.partselect.com/Schematics/Maytag/55512.gif

Electronic Clock Oven Control with Overlay - Black

Your Price

$389.35
$60
Recycling Rebate
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11742901
Manufacturer Part Number WP5701M719-60
Manufactured by Whirlpool

This part controls the functions of your oven such as bake, broil, timed bake and the clock.

This part works with the following brands: Amana, Maytag.

This part works with the following products: Range.

This part fixes the following symptoms:

  • Will Not Start.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.9 / 5.0, 3 reviews What's this?
1-3 of 3
 

4 of 6 people found this instruction helpful

Parts Used:
  • Electronic Clock Oven Control with Overlay - Black
Level of Difficulty: Easy
Time to do repair: More than 2 hours
Tools: Nutdriver, Screw drivers
Customer: Matthew from Red Wing, MN

Oven wouldn't heat after loud surge

My wife heard a loud surge when preheating the oven one day. When I restored power, the oven wouldn't heat and half of the oven display would not light. Broiler OK. Range top OK. The oven coil was electrically open after having melted through itself during the surge. I ordered a oven coil from PartSelect, based on model #. Installation was simple and only involved several easy to remove screws and a couple electrical terminal lugs. I replaced the coil but the oven would not heat beyond 100°F. I ordered a new oven display from PartSelect. PartSelect described what display series is required for a particular serial number. The first 2 #'s of the serial # are the display series required for the oven. My serial's first 2 numbers were 1 and 7, but PartSelect offered only a 10 or 12 series. I ordered a 12 series display and the part was identical. When I removed the faulty display, there were clearly burnt regions of the circuit card. Removal and installation of the display involved a nutdriver, philips screwdriver and circuit card plugs.
I am not sure what caused the failure, the display or the element, but, in either case, I believe the cause is eliminated. The total repair costs were around $225 in parts. At the moment of failure, the oven was approximately 5 years old.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Electronic Clock Oven Control with Overlay - Black
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Herbert from Ocala, FL

Oven was inoperable

Removed the rear covering plate, removed four small screws that held the clock mechanism in place, pulled the four color coded connections, slipped the color coded connections onto the new part, replaced the four screws, finally replaced the rear covering plate. Simple. The delivery of the part was the fastest delivery I have ever experienced. I'll keep PartSelect in my favorites.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 5 people found this instruction helpful

Parts Used:
  • Electronic Clock Oven Control with Overlay - Black
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Shirley from Charlton, MA

Everything worked but the oven

I had to replace the electric oven unit because it had a crack in the coil. The oven still did not work so I had a friend check the electrical parts and was told the oven sensors were no good. Took down all the info I needed off stove and looked it up at partselect.com. Ordered part and when it came in I had my friend take the back panel that has the control units in it and using latex gloves(safety measure) replace the old sensor board with the new one. It was just pulling a few plugs from the old board and putting them into the new one .I would use partselect again to order what I needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11742901
Manufacturer Part Number: WP5701M719-60
Brand Model Number Description
AmanaAER5515QAQRange - Freestanding, Electric
AmanaAER5515QAWRange - Freestanding, Electric
AmanaAER5515RCWRange - Freestanding, Electric
AmanaAER5715QAQRange - Freestanding, Electric
AmanaAER5715QASRange - Freestanding, Electric
AmanaAER5715QAWRange - Freestanding, Electric
AmanaAER5715QCBRange - Freestanding, Electric
AmanaAER5715QCSRange - Freestanding, Electric
AmanaAER5715QCWRange - Freestanding, Electric
AmanaAER5715RCBRange - Freestanding, Electric
AmanaAER5715RCSRange - Freestanding, Electric
AmanaAER5715RCWRange - Freestanding, Electric
AmanaAER5725QAFRange - Freestanding, Electric
AmanaAER5725QANRange - Freestanding, Electric
AmanaAER5725QAQRange - Freestanding, Electric
AmanaAER5725QAWRange - Freestanding, Electric
MaytagMER5555QABRange - Freestanding, Electric
MaytagMER5555QCBRange - Freestanding, Electric
MaytagMER5555RCBRange - Freestanding, Electric
MaytagMER5755QABRange - Freestanding, Electric
MaytagMER5755QASRange - Freestanding, Electric
MaytagMER5755QCBRange - Freestanding, Electric
MaytagMER5765QABRange - Freestanding, Electric
MaytagMER5765RABRange - Freestanding, Electric
MaytagMER5765RASRange - Freestanding, Electric
MaytagMER5765RCBRange - Freestanding, Electric
MaytagMER5765RCSRange - Freestanding, Electric
MaytagMERS755RABRange - Freestanding, Electric
MaytagMERS755RASRange - Freestanding, Electric