This is an OEM lint filter for a dryer. This lint filter screen has two side guides on either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide. This part is white and is made of plastic. You may need to replace the filter if the plastic is broken or warped. Simply slide the lint filter out of the slot and slide the replacement filter in. The lint filter collects lint from drying clothes and prevents lint from building up in internal moving parts, specifically the heating coil. Neglecting to clean your lint filter is a fire hazard, be sure to clean it on a regular basis.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer.
This part works with the following products:
Norge, Magic Chef, Maytag, Crosley.
Part# WP53-0918 replaces these:
AP6009639, 53-0918
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
November 9, 2017
I need a lint filter and the plastic piece it slides into. Thanks
For model number Admiral max capacity
Hi Scott,
Thank you for your inquiry. Before we can assist you further we would need the model number from your appliance. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Howard
May 7, 2018
How do I clean the complete dryer filter not just the filter it self ?
For model number Pyet344ayw
Hi Howard, Thank you for the question. To clean the lint duct you will need to remove the front panel of the dryer and vacuum out the duct. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Janet
December 27, 2022
My lint filter doesn't fit down into the opening all the way and I have had clothes catch on the corner of the filter and either tear the cloth or twist it, like washcloths, etc. Not sure if it has warped over the years? I just bought this house with this dryer in it. Works fine except for this.
For model number CDG7000W
Hi Janet, thank you for your inquiry. If your lint trap will not slide into its slot properly anymore, there are three reasons why. The lint trap is warped, your filter is dirty, and something is stuck inside the filter slot. To give the area a check, unplug the dryer and remove the lint trap. Shine a flashlight down in the hole to see if you can see an obstruction or if it needs to be cleaned; if it is warped, you need to replace it with part number PS11742807 to fix this issue. Please reach out to customer service if you need help placing an order. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Julianne
April 10, 2023
My Maytag dryer lint filter needs replacing and my Maytag manual does not have a part number for the filter. It is a very old dryer but works perfectly. Will this filter fit. It looks exactly like this on
For model number PYET444AYW
Hello Julianne, thank you for your question. The correct Lint Filter for your your model is PS11742807. We are pleased to have been able to help.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Part Videos
Replacing your Norge Dryer Lint Filter
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 39 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
lint filter broke
I pulled out the broken lint filter and put the new one back in, real easy. I am so happy with the prompt delivery I got from PartsSelect.com. I ordered on a Monday and and it was delivered on a Wednesday
Jane from Grand Forks, ND
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
478 of 488 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat
Lift the top. Remove (2) screws holding the front of the dryer in place. Lift the front off the 2 retaining clips on the bottom of the dryer. The hardest part of the install was removing and replacing the igniter. A couple of helping hands from the girlfriend to hold the parts in place while I replaced the two screws was very helpfull. Installing the multi rib belt was also very easy with the help of a second pair of arms to reach under the drum to thread the belt onto the tensioner. The lint filter, of coarse was just a matter of throwing the old cracked one away and replacing w/ the new.
First went and got a beer. Looked at the dryer. Drank my beer. Went and got one more, due to long job. Looked at dryer again. Opened the door. Had to get one more beer. Removed filter. Got one more cold one. Put new filter in. Got one more beer. Closed door. Finished!
BRUCE from SAN MARCOS, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
144 of 218 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator wouldn't turn
Not sure, my husband did the repair but said it wa real easy and if he can do it anyone can, lol
Door seal partially torn off. Lint filter worn with holes.
Parts Select made it extremely easy to order parts from their site. Parts came in a timely manner and very reasonable priced. Thanks to Parts Select! Door Seal just needed to be removed and replaced by pushing into little slot openings.
It was easy - I had my 12yr old daughter do it. The old door seal was completely removed, then you placed the new seal in the apropriate knoches that are on the door of the dryer. The lint filter just had to be placed in the vent. - Done.
Dry was heating intermittently at first and then stopped heating.
I first confirmed that the ingitor was working (because I could see it glow with the lights off at the bottom of dryer). I read within Parts Select that intermittent heating was likely the coils and that I could test their resistance to confirm that this was the problem. I removed the coils (very easy) and thenI checked their resistance with a tester. The resistance on one of them was reading 600 ohms instead of the required 1300 ohms. So I replaced them both and presto it works fine. I also took the opportunity to thoroughly clean out the lint (accessible with the front panel removed) and I replaced the lint filter which was ripped and the gasket around the door which was missing a piece. All very easy to do and parts select made it a cinch. For safety I made sure that the gas and electric were off before I did any of this work. oh, I also levelled the foot which made my wife happy.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
![](https://partselectcom.azureedge.net//346995-1-S-Whirlpool-341241-Multi-Rib-Belt-92-1-4-amp-quot.jpg "Multi Rib Belt - 92-1/4" – Part Number: 341241")
