This is an OEM lint filter for a dryer. This lint filter screen has two side guides on either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide. This part is white and is made of plastic. You may need to replace the filter if the plastic is broken or warped. Simply slide the lint filter out of the slot and slide the replacement filter in. The lint filter collects lint from drying clothes and prevents lint from building up in internal moving parts, specifically the heating coil. Neglecting to clean your lint filter is a fire hazard, be sure to clean it on a regular basis.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer.
This part works with the following products:
Norge, Magic Chef, Maytag, Crosley.
Part# WP53-0918 replaces these:
AP6009639, 53-0918
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
November 9, 2017
I need a lint filter and the plastic piece it slides into. Thanks
For model number Admiral max capacity
Hi Scott,
Thank you for your inquiry. Before we can assist you further we would need the model number from your appliance. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Howard
May 7, 2018
How do I clean the complete dryer filter not just the filter it self ?
For model number Pyet344ayw
Hi Howard, Thank you for the question. To clean the lint duct you will need to remove the front panel of the dryer and vacuum out the duct. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Janet
December 27, 2022
My lint filter doesn't fit down into the opening all the way and I have had clothes catch on the corner of the filter and either tear the cloth or twist it, like washcloths, etc. Not sure if it has warped over the years? I just bought this house with this dryer in it. Works fine except for this.
For model number CDG7000W
Hi Janet, thank you for your inquiry. If your lint trap will not slide into its slot properly anymore, there are three reasons why. The lint trap is warped, your filter is dirty, and something is stuck inside the filter slot. To give the area a check, unplug the dryer and remove the lint trap. Shine a flashlight down in the hole to see if you can see an obstruction or if it needs to be cleaned; if it is warped, you need to replace it with part number PS11742807 to fix this issue. Please reach out to customer service if you need help placing an order. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Julianne
April 10, 2023
My Maytag dryer lint filter needs replacing and my Maytag manual does not have a part number for the filter. It is a very old dryer but works perfectly. Will this filter fit. It looks exactly like this on
For model number PYET444AYW
Hello Julianne, thank you for your question. The correct Lint Filter for your your model is PS11742807. We are pleased to have been able to help.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Norge Dryer Lint Filter
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 39 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Long filter didn't fit, excessive plastic flashing, poor quality
hand tried flashing, still did not fit well. Too large. Appears to be made from worn out mold. No instructions included with burner controller, it would have been helpful to have a wiring diagram as the new controller did not match old. Once wired, controller works great
Remove broken lint filter, stick in new filter. Couldn't be easier.
Karen from VISALIA, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old filter came apart. had a large opening in it.
Just slid the new filter in.
James from DELAND, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint screen required replacement
Unfortunately, due to a catalogue glitch, the part delivered was the wrong size. However, Donald of customer service took the time to run down the correct part, and that is enroute to me now. Donald, thank you so much for your help!
curtis from POWHATAN, VA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Existing lint filter broke
Removed broken filter, used screwdriver to clear out some old lint in the intake and inserted new filter. New filter fits and works as described.
Stephen from ODENTON, MD
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter in the 22 year old Admiral gas dryer was wearing out
Received the replacement filter which was an exact duplicate of the 22 year old filter. Took the old one out; slid the new one in and got ready for another 22 years of use. At 86 years of age I probably won't be around to see the new filter wear out. The dryer has already outlasted the place where I purchased it - Montgomery Wards! They just don't make stuff to last like this anymore.
Joseph from DENVER, CO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint screen was broken
This Was pretty simple, removed the old broken screen. There are two torque screws on the outside where the bottom of the door is, I removed them so I could move the screen on the inside so I could clean out the excess lint. vacuumed out the lint, tightened the screws back in and slid the new screen in and it was done.
jacob from WANATAH, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lint trap plastic frame broke
Removed old trap and installed new trap.
Paul from Oakdale, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Problem, Old filter had seen better days.
No Repair, just replacement. Went perfect.
Ruth V from Westminster, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
minor annoyances I lived with for far too long
Haven't used the bottom door shelf of my refrigerator for years, lived with a lint filter on my hand-me-down dryer that was taped with electrical tape since the day I inherited it, and loaded and unloaded my dishwasher with irritation because of a broken clip on the bottom rack. Ordered the parts from PartSelect and got them in just 2 days. Fixed all three problems in about 15 minutes total. It's like getting new appliances...why didn't I do this sooner?
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
