
Speed Nut
$
4.89
In Stock



Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS11742700
Manufacturer Part Number WP486692
Manufactured by
Whirlpool
You May Also Need?
Product Description
Speed Nut Specifications
The speed nut (also referred to as a condenser motor fan nut), fits onto the condenser fan motor. The motor for this fan turns on simultaneously with the evaporator and the compressor motors, so a malfunction in the condenser fan motor could cause your fridge to cycle on and off more frequently or run too warm, or too noisily. Make sure that the speed nut is properly attached and tight. Check the nut for any signs of wear or damage. If the nut is damaged and refuses to tighten, you should replace the part immediately. Remember to unplug your refrigerator before starting this repair.

How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator, Ice Maker, Freezer, Dehumidifier.
This part works with the following products:
Kenmore, Whirlpool, Amana, Admiral.
Part# WP486692 replaces these:
01-16-794, 12632601, 19914, 19914-0, 19914-1, 215809, 24-01-051, 486692, 487711, 489018, 510707, 595380, 595381, 8171281, C5861302, M0286113, Y19914
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 2 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Refrig making a lot of noise
The motor kit had only two wires coming out of it. The existing one in the refrig had 6. I spliced the 2 red to one black on the new part and 2 white to the other black wire on the new part. The two green I attached to a screw. I left the 6 wire harness in place just cut off the plug piece that went into the old motor, and spliced all my wires.
Worked great!
Worked great!
Other Parts Used:
-
Carol from Monroe, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
16 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator noise
unplugged refrigerator, unplugged fan motor under fridge, unscrewed four metal screws holding fan support, took support and fan out together, unbolted fan from support frame, reversed procedure to reinstall then cut both red wires and both white wires, fan comes with only two wires so i connected the two red wires to one of the black wire, and connected two white wires to the other black wires, used connectors in hardware package to secure connections, turned refrigerator back on, worked perfectly, fan installed in bracket support perfectly. just want to point out that the fan motor does come with a fan blade and hold down screw so those items don't have to be purchased seperately.
Other Parts Used:
-
todd from mccomb, MS
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742700
Manufacturer Part Number: WP486692
Manufacturer Part Number: WP486692
Brand
Model Number
Description
