We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
14 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
May 23, 2019
Can this part be expedited, and is this the self cleaning fuse that can go out
Hi Jim,Thank you for your question. The stock status for parts is always listed below the Add to Cart button on our site underneath the part information that you will see above the question and answer section. If you are not sure what a stock status means, you can click on it and a separate window will appear with the explanation for what that status means. When you add the part to your cart you will be given our shipping options. Unfortunately I am not entirely sure what you mean by "Self Cleaning Fuse" however this part is a thermostat. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sarah
January 16, 2023
My oven temperature is much lower than shows on the display, like 375 when the display says 425. (Two over thermometers agree on the actual temperature, and I can feel that large a difference.)
Is this thermostat what I need to replace or something else? Thank you for your help!
For model number Kitchenaid KSDB900ESS0
Hi Sarah, thank you for asking. We recommend that you check the temperature sensor, part number PS11726314, and the bake element, part number PS11703285, as these are most likely culprits. If you require assistance to place an order, please contact customer service. We hope that helps!
When oven is first turned on to bake it shows 177, when i enter 350 and hit start it goes back to 177
For model number wos51ec7aw00
Hello Maureen, thank you for writing. This is likely due to a faulty Oven Sensor, part number PS11744233 for your model wall oven. You may also want to consider the Electronic Control, part number PS11703485. You can test the Oven Sensor with a multi-meter. It should read between 900 and 1200 ohms of resistance to be working correctly. Good luck with your repair!
Was this helpful?
Thank you for voting!
Thomas
January 7, 2020
My double oven stop working after a self cleaning. I have no display on the front button. Door is lock try to turn off breaker and turn back on but still no display. I have power coming to the oven. What can I do? Help! Thanks
For model number WOD51EC7AS01
Hello Thomas, Thank you for the question. With no display and the locked door, it sounds like a defective Electronic Control Board, PartSelect Number PS11756043. We hope this helps!
My cooling fan stays on way too long - up to an hour. But otherwise temp functions seem ok. Not sure if my model has a separate cooling fan thermostat..(not shown specifically in parts diagram)???? if so it may be a good place to start. Any other more general thermostat eg 9755542 Probe, Temperature (which i can see in diagram) would surely affect other functions.
For model number KEBS277BSS00
Hello Jeremy, Thank you for your inquiry. The high limit thermostat is what sends voltage to the cooling fan to keep the oven from overheating. We also recommend checking the oven temperature sensor. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
My fan in my oven stays on at all times. The oven heats up but again the fan will not shut off. Do I need to replace the thermostat or the sensor?
For model number Kdrs467vss04
Hello Gary, thank you for reaching out. According to our research, the problem seems to be with the Thermostat, part number is PS11742549. If you require assistance placing an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Thomas Ingles
January 6, 2020
How can i tell if this part is bad
For model number 4449751
Hello Thomas, thank you for your question. The best way to determine if this part is bad is to test it with a multimeter. It should read between 900 and 1200 ohms of resistance to be working correctly. Good luck with your repair!
Was this helpful?
Thank you for voting!
Thomas Ingles
January 6, 2020
How many owns i should read on this sensor right now i am reading 000.3 owns
For model number Wp4449751
Hello Thomas. It should read closed for continuity. You can test this with a multi-meter. Here is a link on how to test for continuity to see if the part has failed. I hope this helps!
https://www.youtube.com/watch?v=bWC44fHn0As
Was this helpful?
Thank you for voting!
Jorge
July 16, 2019
Hola necesito saber cuanto debe medir este numero de parte wp4449751 en ohmios o en continuidad gracias
For model number kebs179bss
Hi Jorge, Gracias por tu pregunta. Al probar esta parte, debería estar leyendo cerca o 0 ohmios, para estar trabajando. Espero que eso ayude. Buena suerte con tu reparación.
Was this helpful?
Thank you for voting!
Jim
July 22, 2019
The fan will continue to run even when the oven is off and cooled. I shut off the breaker to the oven and then turned the breaker back on. The fan continued to run. Can the issue be the thermostat?
Hello Jim, thank you for inquiring. You will want to replace the Electric Control part number PS11752337 for your model. Good luck with your repair!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
