This assembly includes the socket, light bulb and lens.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Wall Oven, Microwave Oven Combo, Range.
This part works with the following products:
KitchenAid, Crosley, Maytag.
Part# WP4448972 replaces these:
4448972, 4450930
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The light bulb burnt out, the assembly was damaged by the rack sliding in and out
This is a microwave/ Oven slide in unit. You DO NOT need to slide out the unit, the repair can be done from inside the oven. Just be careful on pulling the wires from the unit so they do not break. I used shrink wrap over the joints but you can use tape as long as it can take the temperatures
Robert from CLINTON, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
December 19, 2018
Does this kit come with the screw that attaches to unit to the oven wall or is that a separate part. Also, i can not tell what type of screw head type is used. Is a phillips?
For model number Kitchen Aid KEBC107
Hello Mark, thank you for your question. I don't see a screw that holds this into place. From the information provided by the manufacturer you would remove the electrical quick disconnect plug from the back (which would require removing the back/side panel). Then from the inside of the oven cavity unsnap the light lens and remove the light bulb. The light assembly is held in place by some clips on the sides which can unsnap, then you would pull the light assemble out and pull (fish) the wire harness from the back. I hope this helps.
Was this helpful?
Thank you for voting!
James
November 28, 2018
Can I order just replacement bulbs for the interior . Don’t need anything else
For model number KEBS207DBL2
Hello James, Thank you for the question. Very sorry but the bulb is only made and sold as part of the Oven Halogen Light Assembly, PartSelect Number PS11742535. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
