The light switch terminal is used in refrigerators and freezers to allow you to see inside your appliance by turning on when the fridge door is open and turning off when the door is closed. This part is 1.12 inches in length, 1 inches in width, and 1.75 inches in height. It weighs 0.026 pounds. If your light switch terminal is damaged or the light does not turn on when fridge door is open, replacing the light switch terminal can fix the problem. As a safety precaution, remember to unplug your fridge from the power source before beginning this installation. Refer to the manual provided by the manufacturer for further installation instructions and a detailed guide.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Light not working
This part works with the following products:
Refrigerator, Trash Compactor.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# WP4387911 replaces these:
1115373, 1119294, 14211013, 3-82629-001, 41001104, 4149377, 4152058, 4152059, 4152060, 4343931, 4344550, 4387911, 531900, 548473, 548598, 548898, 749114, 749129, 833571, 833785
... Show more
, 851387, 867210, 876602, W10164501, Y4149377, Y4152058
Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
October 23, 2019
When door is open the light is a strobe light
For model number MSB27C2XAM00
Hello Tom and thanks for writing.
This sounds very much like a defective switch. We hope this helps. Please contact us anytime.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Rodger
July 8, 2019
I entered part number 4152058, switch for a Whirlpool trash compactor. The part indicated that that switch has been replaced with another switch with three prongs instead of two prongs. Will this switch fit my trash compactor?
Hello Rodger, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
August 26, 2019
Freezer compartment lights not working. I know there's power to the switch. I know that the led lights are good and work. I have a new switch on order. If replacing the switch doesn't solve the problem, where do i look next? Is the next step to replace a circuit board. If so, where is it located and what is the part number?
For model number jsc23c9eem00
Hi Michael, thank you for your question. I would suggest looking at your lights themselves if the switch is not the issue. I have linked that part below for you. If that part is fine then I would go on to take a look at control board being the issue. I hope that helps. Good luck with your repair.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Light switch broke on refridgerator door.
I measured the part then looked for a similar switch that might work. I was so happy to find the exact part we needed for our 24 year old refridgerator!! I was so impressed with your slection of parts and best of all I had the part in 2 days! You are in my "favorites" just in case I need you again!
Thank you
Darlene from Holland, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
9 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The light would not turn on when the refrigerator door was opened
I removed the plastic portion to get to the switch and wires. I removed the old switch by disconnecting the two wires and pushing it out of its setting.
I discovered the old switch only had 2 prongs where the new switch had 3. Once I figured which 2 of the 3 prongs would light the lightbulb, I then connected the two wires to the correct prongs of the new switch. I pushed the new switch into its setting and replaced the plastic portion on the refrigerator. Voila, success. The refrigerator door now comes on when its door is opened.
Thanks for the having the part and getting it at our door step in 3 days.
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
