Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
August 15, 2019
Hello, my microwave shows an f6e0 code and continues to blow line fuses at power-up.I have replaced both boards and the problem continues. i have also checked continuity of wires. the unit tries to turn on the display shows the heating symbol but it doesn't spin or turn on. line fuse blows immediately.
For model number KBHS109SSS03
Good Day David. Thank you for your question in regards to your unit (Model Number KBHS109SSS03). Based on our research code F6E0 on your unit means the following - "If switch pulse return line is not connected, electronic control will display F6 within 60 seconds after power up. Replace control". If you have already replaced the control and that has not fixed the issue we would recommend reaching out the manufacturer at 800-541-6390 for further assistance as you may need a service technician. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
November 15, 2019
My microwave stop working and the screen is blank. The unit is approx 3.5 years old. Do you think most likely I need to replace the fuse? What is the part number for this fuse?
For model number KBMS1454BSS-0
Hi Leighton, it is probably either the fuse PS11742452 or the control board which is sadly discontinued. Thank you for your question and good luck with your repair!