Part Location Diagram of WP3977767 Whirlpool Dryer High Limit Thermostat
See part 15 in the diagram
Replacing your Whirlpool Dryer Dryer High Limit Thermostat
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Dryer High Limit Thermostat WP3977767

 Fits your 4KAED4900FW0!
★★★★★
★★★★★
28 Reviews

Rated by 71 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 23.49
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 4KAED4900FW0!
PartSelect Number PS11742185
Manufacturer Part Number WP3977767
Manufactured by Whirlpool for Whirlpool, Kenmore, Maytag, Roper
Product Description

Dryer High Limit Thermostat Specifications

A dryer high-limit thermostat (High Limit Thermostat, Hi-Limit Thermostat, Dryer High-Limit Thermostat) is a switch that is actuated by temperature change. This high limit thermostat acts as a safety mechanism to keep the dryer from overheating. If your thermostat is malfunctioning, your dryer may not heat. This thermostat is located beneath the dryer vent at the back of the appliance. The terminal extension arm connects to the heater element terminal. You can test the high limit thermostat with a multimeter. Test the thermostat for continuity at room temperature. If your reading indicates a defective thermostat, it must be replaced. This model is made of metal and plastic, and comes in silver/black. This part features 1 high limit thermostat with a terminal extension arm.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos
Difficulty: Easy | Tools Required: Nutdriver,Screw drivers

Replacing your Whirlpool Dryer Dryer High Limit Thermostat

Replacing your Whirlpool Dryer Dryer High Limit Thermostat

How to Troubleshoot a Dryer That Doesn't Heat Properly

How to Troubleshoot a Dryer That Doesn't Heat Properly

Test If Your Electrical Part is Failing - Multimeter Tool

Test If Your Electrical Part is Failing - Multimeter Tool
Troubleshooting
This part fixes the following symptoms:
Too hot | Not Heating
This part works with the following products:
Dryer.
Part# WP3977767 replaces these:
AP6009043, 3399693, 3977767, WP3977767VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
28 Reviews
4.6
Filter By Rating:
  • 5 Stars
    24
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    2
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 71 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
No heat, everything else worked fine.
Installed the new High Limit Thermostat onto the new Heating element and installed the unit on the dryer. Wires were then connected and the dryer was tested. Repair complete. Dryer is 25 years old and this is its first repair.
Other Parts Used:
Dryer High Limit Thermostat Heating Element - 240V 5400W
  • STEVEN from MORA, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer overheated and blow out the thermastat
Repair was easy because I followed the video and it was so helpful
Other Parts Used:
Cycling Thermostat - Limit 135/155 Dryer High Limit Thermostat Dryer Thermal Fuse
  • Richard from Trout Creek, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat on any applicable settings
Cleaned entire unit, replaced all thermostat assemblies and exhaust seal
Other Parts Used:
Dryer High Limit Thermostat Lint Trap Housing Seal Dryer Cycling Thermostat Thermal Cut-Off Kit
  • Russell from LOUISVILLE, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was getting too hot, metallic burning smell
To replace the thermostat and heating element, I followed the video from PartSelect.

Before buying the parts, I had already taken my machine apart to clean it and check for lint build up, but there was only a bit of dust, no major blockages. Because the burning smell was metallic, I just had my fingers crossed that replacing the heating element and thermostat would do the trick. It worked!
There is an odd ceramic sort of smell in the first 5 minutes of using the new element but that went away and all is working well at this point.

My components looked slightly different from those on the video; I had fewer wires so I just took photos of everything before I started to make sure I put it all back in the correct place.
I had to watch another video on how to easily remove the thermostat, mine was stuck. I just used a flat head screw driver behind it like a lever and gently pried it off.
It took me about 30 minutes total only because I had to watch a couple of extra YouTube videos due to the differences of my machine. I don’t usually do repairs like this one and wanted to be completely sure I was doing it correctly, but the work/repair itself was super easy.

The lint trap seal was just because mine got damaged when I took it apart to clean it. I just pulled the old one off, made sure the old adhesive was completely removed, (it peeled off like scotch tape), I cleaned it, then I slowly went around the edge of the vent/housing and stuck the new foam seal down. No video required, just common sense.
Other Parts Used:
Dryer High Limit Thermostat Lint Trap Housing Seal Heating Element - 240V 5400W
  • Hayley from ALEXANDRIA, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer stop heating
I fixed it with my soccer set I took the lent thing off and clean it out was stopped up with lent didint need the parts I order but I will keep them for the future.
Other Parts Used:
Dryer High Limit Thermostat Dryer Cycling Thermostat
  • Lee from ZACHARY, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit was tripping the circuit breaker after about 10 minutes of drying time
Unplugged the unit, removed the back panel of the dryer and then removed the thermostat panel. Disconnected the wires on the thermostat and changed out the thermostat.
  • Peter from FAIR OAKS, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer Not heating
Based on your web site I assumed the problem with the dryer not heating was either the Thermostat or the fuse. Since I could not locate my multimeter I ordered those parts. Prior to receiving the parts I located my multimeter and discovered both part were good. After further investigation I learned the timer motor (seldom at fault) might be faulty. I tested the timer moter and found an open circuit. Local appliance store had one. I installed the new timer motor and I now have a working dryer. Thank you for your informative web site
  • Daniel from MILFORD, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Intermittent heat issues
The replacement parts are truly easy to exchange. Everything is located behind the rear panel. A few fasteners needed to be undone. What's really important is another video that explained what should be "checked" when a dryer malfunctions. VERY IMPORTANT viewing. I spent an afternoon going over the front inside and rear of my dryer. I'll probably get another ten years from my dryer thanks to this site data and videos.
Other Parts Used:
Dryer High Limit Thermostat Heating Element - 240V 5400W Heating Element Connection Wire Kit
  • David from WEST WARWICK, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat only
repairing is pretty straightforward.
  • moujin from CARMEL, IN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer too hot in all heat settings.
My dryer was running way too hot and the temperature settings didn't make any difference. Clothes were shrinking and coming out almost scalding hot. I followed simple directions posted on you tube for troubleshooting this problem. I checked that there were no lint blockages, visually inspected all connections and hardware. All seemed good. Metered out all thermostats and fuses. Everything checked good for continuity. For the reset-able thermostats, I heated them on a hot plate to verify that the normally closed switches opened near their specified temperatures. Dont do this for the non-resetable fuses and thermostats. If you're
not sure, avoid this step. Only the hi-limit thermostat seemed to open a little higher than expected but I couldn't with 100% accuracy determine the exact temp it opened. Made sure the heating element wasn't shorted in its housing or that too might give the dryer the same symptoms. That checked good too. Only thing left I could think of was to change that hi-limit thermostat. Ordered part, removed and replaced. Perfect fit. Op-checked good. All heat settings now operate normally. No more shrunken clothes that are too hot to touch even on the lowest setting lol. Hope this helps, happy hunting.
  • Jon from SALINAS, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

47 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gillis
July 20, 2017
How do I remove the old hi-limit thermostat and replace it with this one?
PartSelect logo
Hello Gillis, one side of the hi-limit goes onto the heater terminal and the other connects to the wire. Replace the old one on the heater leg with the new one. Best of luck with this repair.

26 people found this helpful.

Was this helpful?
Thank you for voting!
Ed
July 20, 2017
Can I test this with a multi-meter? If so how will I know if it is still in good condition?
PartSelect logo
Hi Ed, yes, this high-limit thermostat can be tested with a multi-meter tool, and should read closed for continuity. Please let us know if you have any further questions.

21 people found this helpful.

Was this helpful?
Thank you for voting!
Jessica
November 29, 2017
Based on my model number (len2000pw1) i need part number 3977767 but the one i took off my dryer is is 3977393 which only has two terminals, therefore, there are only two wires coming out of there. Which part do i need to replace this?
For model number LEN2000PW1
PartSelect logo
Hi Jessica, Thank you for your question. The part you removed from your dryer, part number 3977393, is part of a thermal cut-off kit. The thermal cut-off turns off the heating component when the dryer overheats, ensuring there is a consistent level of heat at all times. This dryer thermal cut-off kit includes one high-limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires. If your dryer is not starting properly, shutting off too soon or is taking too long to dry your clothes it could be because it has blown and needs to be replaced. This would be the part you would need to replace and you would replace both parts at the same time. I hope this helps. Thank you and have a great day!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Hongwei
November 9, 2017
Not heating. Drum can spin. I changed thermostat, fuse. Did not change high limit thermostat. I used test pencil to test the high limit thermostat, both poles are light on. Is the heating element broken?
For model number LEQ5000KQ1
PartSelect logo
Hi Hongwei, Thank you for the question. There is a Thermal Fuse and a thermal cut-off fuse. The thermal cut-off fuse is included with a kit with the high-limit thermostat,PartSelect Number PS334299. I suggest testing this fuse. Hope this helps!

9 people found this helpful.

Was this helpful?
Thank you for voting!
SUE
November 12, 2017
We have replaced the heating element and the thermostate and still no heat . Please help
For model number NED4600YQ0
PartSelect logo
Hi Sue, Thank you for your inquiry. If your dryer is not getting enough heat, there are some parts that you will need to check to see which one is causing the issue. You will need to check the thermal cut off kit., the internal bias thermostat, the heating element connection wires, the belt and the door switch. I hope this helps. Thank you and have a great day!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Aaron
July 20, 2017
My dryer is not working properly when I have it on “auto dry” but every other setting seems to work. You recommended first to check the vents and the blower but those are all in good condition and no clogging, where should I go to next? Would it be the hi-limit thermo?
PartSelect logo
Hello Aaron, the most likely reason for the dryer to not have heat, would be a damaged contact in the timer. I hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
April 12, 2018
I checked my high limit switch with a multimeter and had no toner
For model number MED5870TW0
PartSelect logo
Hi Mike, Thank you for the question. The High Limit Thermostat should read closed for continuity. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Ryan
February 3, 2020
What is the difference between this part an the thermal cut off
For model number Teds740jq1
PartSelect logo
Hello Ryan, Thank you for the question. The Thermal Cut-Off Kit PartSelect Number PS334299 includes the Thermal Cut Off Fuse and the High-Limit Thermostat. The PartSelect Number PS11742185 Dryer High Limit Thermostat is just the Thermostat on its own. We recommend replacing the fuse and Thermostat together. We hope this helps.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Thomas Stockett
February 27, 2018
I have cleaned all exhausts, from the roof down to inside dryer. Took off rear side, cleaned very little lint anywhere. I have heat, but inside drum (dryer) humid, like there's no circulation. Turned on fan, it works,blows air out the exhaust. It take 2-3 hrs to dry clothes,but the are always most.Out.
For model number MEDX655DWO
PartSelect logo
Hello Thomas, thank you for your question. There are a couple of parts you will want to check in relation to this issue. The Thermal Cut-Off Kit Part Number: 279816. The thermal cut-off turns off the heating component when the dryer overheats, ensuring there is a consistent level of heat at all times. This dryer thermal cut-off kit includes one high-limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees), so it cycles the heat in the unit. Also, you will want to check the Internal-Bias Thermostat Part Number WP8318268. This thermostat has an internal heater L155-25F. This thermostat controls the internal drying temperature. These parts can be tested with a multimeter to determine if they have continuity. I hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Bob
March 31, 2018
My Kenmore dryer is about 5yrs old,was working fine until last week.Now when i turn it on it will blow heat for about 3 to 5 min and then will just blow out air.Takes about an hour to dry,would this part fix the problem? Bob
For model number 110.61202011
PartSelect logo
Hello Bob, Thank you for your inquiry. This is one of the parts that could fix this issue, we would also recommend checking the thermal fuse, internal bias thermostat, thermal cut off kit and heating assembly. You can test the parts with a multimeter. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742185
Manufacturer Part Number: WP3977767
Brand
Model Number
Description
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer
Kenmore
11060022010
Dryer
Kenmore
1106012510
Dryer - ELECTRIC DRYER
Kenmore
1106012990
Dryer - Kenmore Dryer Model 110.6012990 (1106012990, 110 6012990) Parts
Kenmore
11060172001
Dryer
Kenmore
11060172002
Dryer
Kenmore
11060202990
Dryer
Kenmore
11060212990
Dryer
Kenmore
11060222511
Dryer - ELECTRIC DRYER
Kenmore
11060232001
Dryer
Kenmore
11060232002
Dryer
Kenmore
11060522900
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
1106062110
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060712990
Dryer
Kenmore
1106072011
Dryer - ELECTRIC DRYER
Kenmore
11060722990
Dryer
Kenmore
11060724990
Dryer
Kenmore
11060727990
Dryer
Kenmore
11060802990
Dryer
Kenmore
11060812990
Dryer
Kenmore
11060814990
Dryer
Kenmore
11060817990
Dryer
Kenmore
11060832990
Dryer
Kenmore
11060842990
Dryer
Kenmore
1106085299
Dryer - Kenmore Dryer Model 110.6085299 (1106085299, 110 6085299) Parts
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service