Maytag/Maytag_Thumb/QEUHM0XA.gif
See part 20 in the diagram
Replacing your Whirlpool Washer Washer Agitator play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Washer Agitator

★★★★★
★★★★★
15 Reviews
$121.66   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11742049
Manufacturer Part Number WP3951744
Manufactured by Whirlpool
Product Description

Washer Agitator Specifications

This agitator comes with the 4 agitator dogs (cogs) and top mover. The cap is NOT included with the agitator.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not agitate | Noisy | Shakes and moves
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Amana, Crosley, Estate.
Part# WP3951744 replaces these:
AP6008908, 3951744
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Tammie Corrow
    April 9, 2019
    Can I replace a bottom agitator with a full agitator?
    For model number WTW4800BQ1
    Hello Tammie, thank you for contacting us. Complete Agitator part PS11742049 is a combination of Bottom Agitator part PS11742045, Thrust Spacer part PS11742044, Upper Agitator part PS11741237, and the Agitator Cam Kit part PS334648. It could all be replaced by the Complete Agitator part PS11742049. We hope this helps.

    7 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Kathy
    October 11, 2017
    New cogs put in agitator. Washer will fill with water but won't work after that.
    For model number LSQ9110PW2
    Hi Kathy, Thank you for your question. There are a couple of parts that could cause your machine to fill but not continue on with the cycle. I would suggest next looking at your lid switch. When this part is malfunctioning, it will let your machine fill but it will not let it do anything else because your machine believes that the lid is up and that is a safety hazard. If your lid switch is fine, it may have something to do with your timer. It could be something like your clutch or drive coupling as well. I would suggest just making sure that there is no wear and tear on those parts as well. Good luck with your repair.

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Pat
    February 15, 2020
    Does this kit come preassembled or do i need to put together the agitator cam? I previously just ordered agitator cam but could not get agitator dogs to stay in assembly and snap on.
    For model number WTW4850XQ0
    Hi Pat. This comes assembled as shown in the pictures above. Thank you for your question and good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Steven
    February 21, 2020
    Is agitator assembly (complete) ps11742049 the replacement for my model above.Whirlpool ultimate care ii
    For model number LSQ8543JT1
    Hi Steven, Thank you for your question. Everything in within the dotted line labelled number 20 in the diagram is what you will receive when you order the agitator assembly. We hope this helps. Thank you and have a great day.

    Was this helpful?
    Thank you for voting!
    Trey
    July 22, 2021
    Does this come with the bottom base of the agitator to
    For model number WTW4616FW2
    Hello Trey, Thank you for the question. Yes, this is the full agitator with the base as shown in the picture. We hope this helps!

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Whirlpool Washer Washer Agitator

      Replacing your Whirlpool Washer Washer Agitator play video
      Customer Repair Stories
       Average Repair Rating: 4.2 / 5.0, 44 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Washer made a loud banging noise at end of spin cycle, leaked water and agitator seemed loose
      After entering the model number of your appliance you will be taken to a page where all of the parts are displayed by sections. On that page about in the middle there is a heading called "Find Part By Symptom." I figured out from there which symptom the washer had and read what other people were saying and how they made the repairs. Basically I had three problem areas, Noise, Leaking and a problem with the agitator. I focused on the loud noise first and decided I needed to replace the clutch/brake assemblies. I found the clutch parts page and on that page there was a video on how to make this repair. This video is all you need to gain access to all moving parts located under the cabinet. Which ever part you are replacing, I recommend watching this video! After removing the console, back panel and cabinet then laying the machine on its back just as seen on the video, I had access to the water pump, motor, transmission and related clutch/brake parts. As it turned out I did not need the clutch/brake assembly but as a precaution and because the parts were cheap, I replaced the motor coupling, water pump and tub wear pads. I decided to replace the agitator assembly because of several worn parts associated with the dog ears/drive shaft ETC. I put the machine back upright and took off the top cap on the agitator, then there is an inner cap with seal that gives access to the 7/16" bolt you must remove to remove the agitator. However once the agitator was removed I noticed metal shavings and play in the shaft. I used a spanner wrench to remove the spanner nut. I removed the Plastic Tub Ring (has several clips around the outer tub), then removed the inner washer tub to replace the Drive Block. Replacing the Drive Block stopped the loud noise at the end of the spin cycle. Now just reverse the order to put the machine back together and your done. For my situation it was best to take the machine apart and decide which parts I needed before ordering to minimize errors. These machines are made very cheaply and are designed to brake at some point in time and it is very easy to determine which parts are worn because most are made of plastic. In this process I also noticed where my leaks (did I say Leaks) were coming from. There were two hose clamps installed improperly from the factory, so check all clamps, hoses ETC. and you should be good to go.
      Other Parts Used:
      Seal, Inner Cap Direct Drive Motor Coupling Drive Block - 2 5/16 Inch High Centerpost Gasket Agitator Bolt Direct Drive Water Pump Tub Wear Pads - Package of 3
      • Dexter from Milwaukie, OR
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Pliers, Screw drivers, Socket set
      476 of 557 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Top section of agirtator not working
      Removed top cap and one nut from agirtator then removed complete assembly. Replaced new assembly nut and cap.
      • Vincent from York, ME
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Socket set
      35 of 43 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      plastic dogs wore out
      replaced complete agitator to be on the safe side. Cheap enough fix.
      • Joel from Rhoadesville, VA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Socket set
      23 of 621 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Clothes were not coming out as clean as they were previously.
      I first removed the softener container by simply pulling it up & out. Secondly, I removed the 7/16" bolt that held the agitator in-place & again, simply pulled the agitator up & out. Then I placed the new agitator in, replaced the 7/16" bolt and the softener container - job complete (that simple).
      • Lawrence from Arizona City, AZ
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver
      21 of 619 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Agitator Not Rotating
      Eveything went great. I oldered the part on Sunday evening...received shipping notification on Monday... part arrived Tuesday. Wow! I must say, I am not an appliance repair technician. The job was easy...real easy! I lifted off the softner reservoir...losened a bolt...removed the old agitator...installed the new agitator...tightened the bolt....put the softner reservoir back on....job done. I certainly will buy from this site again. Thanks PartSelect and Staff...Outstanding Service (5 Star)!
      • Mark from San Antonio, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Socket set
      21 of 619 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Agitator was not working properly due to broken plastic pieces in agitator
      First I removed the top of the agitator and then used a socket and ratchet to unscrew the bolt and put the new one on and tightened up the bolt, real easy.
      • doug from spokane, WA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Socket set
      21 of 26 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      washing machine would not agitate clothes during cycles
      first I removed the fabric softner and water seal from center of agitator, then I removed the bolt holding it on. All I had to do then is install new agitator with old bolt place water seal and fabric softner container back on and start washing clothes again. Very simple.
      • Steven Lemons from Fort Greely, AK
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Socket set
      15 of 18 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Making Alot Of Nosie While Washing
      First I removed the fabric softner dispenser. Then I removed cap took screw out removed agitator asseembly put new one in then I put screws back in.
      • CHRISTI from NEWPORT NEWS, VA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers, Socket set
      12 of 18 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Washer top adgitator / Frig. Ice maker not producing
      Washer; I watched the repair video, and replaced the agitator. It was so simple I think that it took longer to watch the video. Refrigerator; I replaced the ice maker, and the solenoid valve. It was very easy to replace the parts, however it took a while to diagnose the problem. I found an appliance repair man that told me what contact points on the front of the ice maker would trigger the clock (so I didn't have to wait for an hour for the clock to activate). There is also a set of contacts that when jumpered will trigger the solenoid valve. It only took a total of 25 minutes to fix both the washer, and the dryer. If you take a piece of 14 Ga. solid wire about 6" long and strip the ends about 3/8" and bend it into a U you have a jumper. If you jump the contact points on the front of the icemaker letters T & H this will start the clock operation. If you jump letters L & V, the solenoid should open to allow water to flow to the tray. If water does not flow, the filter should be checked in the valve. If the valve sounds like it is opening, sometimes the inlet to the ice maker can freeze stoping the flow. In my case I found the solenoid valve was getting only a week signal, and would only function about 25% of the time.
      Other Parts Used:
      Ice Maker Water Inlet Valve
      • Rich from Arnold, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers, Socket set, Wrench set
      11 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Upper agitator would not turn
      First I removed the fabric softener dispenser. I removed the inner cap seal and agitator retaining bolt. Then I firmly pulled up on the agitator to remove the complete agitator assembly. I replaced the inner cap seal and installed the new agitator bolt with rubber washer. I placed the new agitator assembly on the drive shaft and tightened the bolt. Lastly I installed the inner seal and the fabric softener dispenser. The total time spent was around 10 minutes.
      Other Parts Used:
      Seal, Inner Cap Agitator Bolt
      • Robert from Whiteman AFB, MO
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Socket set
      10 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      15 Reviews
      4.1
      Filter By Rating:
      • 5 Stars
        10
      • 4 Stars
        1
      • 3 Stars
        2
      • 2 Stars
        0
      • 1 Star
        2
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11742049
      Manufacturer Part Number: WP3951744
      Brand
      Model Number
      Description
      Kenmore
      11020232711
      Washer - Washer
      Whirlpool
      1CLSQ9549PG0
      Washer - Residential
      Whirlpool
      1CLSQ9549PG1
      Washer - Residential
      Whirlpool
      1CLSQ9549PW0
      Washer - Residential
      Whirlpool
      1CLSQ9549PW1
      Washer - Residential
      Whirlpool
      1CWTW4800YQ1
      Washer - WASHER
      Whirlpool
      1CWTW4800YQ2
      Washer - WASHER
      Whirlpool
      1CWTW5200VQ0
      Washer - Residential
      Whirlpool
      1CWTW5200VQ1
      Washer - Residential
      Whirlpool
      1CWTW5300VW0
      Washer - Residential
      Whirlpool
      1CWTW5300VW1
      Washer - Residential
      Whirlpool
      1CWTW5500SQ0
      Washer - Residential
      Whirlpool
      1CWTW5500ST0
      Washer - Residential
      Whirlpool
      1CWTW5520SQ0
      Washer - Residential
      Whirlpool
      1CWTW5700SW0
      Washer - Residential
      Whirlpool
      1CWTW5790VQ0
      Washer - Residential
      Whirlpool
      1CWTW5790VQ1
      Washer - Residential
      Whirlpool
      1CWTW57ESVW0
      Washer - Residential
      Whirlpool
      1CWTW57ESVW1
      Washer - Residential, Automatic
      Whirlpool
      1CWTW5800SG0
      Washer - Residential
      Whirlpool
      2DLSQ7533JQ0
      Washer - WASHER
      Whirlpool
      2DLSQ7533JQ3
      Washer - Residential
      Whirlpool
      2DLSQ7533JQ4
      Washer - Residential
      Whirlpool
      2DLSQ7533JQ5
      Washer - Residential
      Whirlpool
      2DLSQ8000JQ0
      Washer - Residential
      Whirlpool
      2DLSQ8000JQ3
      Washer - Residential
      Whirlpool
      2DLSQ8000JQ4
      Washer - Residential
      Whirlpool
      2DLSQ8000JQ5
      Washer - Residential
      Whirlpool
      2DWTW4800YQ0
      Washer - Residential, Automatic
      Whirlpool
      2DWTW4800YQ1
      Washer - WASHER

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service