Agitator (Complete) WP3951744 | Official Whirlpool Part | Fast Shipping | PartSelect
Agitator (Complete) – Part Number: WP3951744
Agitator (Complete) – Part Number: WP3951744 Agitator (Complete) – Part Number: WP3951744 https://partselectcom.azureedge.net/Schematics/Maytag/QEUHM0XA.gif

Agitator (Complete)

Product Description

Agitator (Complete) Specifications

This agitator comes with the 4 agitator dogs (cogs) and top mover. The cap is NOT included with the agitator.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Will not agitate, Noisy, Shakes and moves.

This part works with the following products:

Washer.

This part works with the following brands:

Whirlpool, Amana, Crosley, Estate, Inglis.

Part # WP3951744 replaces these:

3951744.
Part Videos

Replacing your Whirlpool Washer Agitator (Complete)

Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 44 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dexter from Milwaukie, OR
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
WPW10072840, 285753A, WP3951744, WP389140, W10814296, WP358237, WP3363394, 285744
Washer made a loud banging noise at end of spin cycle, leaked water and agitator seemed loose
After entering the model number of your appliance you will be taken to a page where all of the parts are displayed by sections. On that page about in the middle there is a heading called "Find Part By Symptom." I figured out from there which symptom the washer had and read what other people were saying and how they made the repairs. Basically I had three problem areas, Noise, Leaking and a problem with the agitator. I focused on the loud noise first and decided I needed to replace the clutch/brake assemblies. I found the clutch parts page and on that page there was a video on how to make this repair. This video is all you need to gain access to all moving parts located under the cabinet. Which ever part you are replacing, I recommend watching this video! After removing the console, back panel and cabinet then laying the machine on its back just as seen on the video, I had access to the water pump, motor, transmission and related clutch/brake parts. As it turned out I did not need the clutch/brake assembly but as a precaution and because the parts were cheap, I replaced the motor coupling, water pump and tub wear pads. I decided to replace the agitator assembly because of several worn parts associated with the dog ears/drive shaft ETC. I put the machine back upright and took off the top cap on the agitator, then there is an inner cap with seal that gives access to the 7/16" bolt you must remove to remove the agitator. However once the agitator was removed I noticed metal shavings and play in the shaft. I used a spanner wrench to remove the spanner nut. I removed the Plastic Tub Ring (has several clips around the outer tub), then removed the inner washer tub to replace the Drive Block. Replacing the Drive Block stopped the loud noise at the end of the spin cycle. Now just reverse the order to put the machine back together and your done. For my situation it was best to take the machine apart and decide which parts I needed before ordering to minimize errors. These machines are made very cheaply and are designed to brake at some point in time and it is very easy to determine which parts are worn because most are made of plastic. In this process I also noticed where my leaks (did I say Leaks) were coming from. There were two hose clamps installed improperly from the factory, so check all clamps, hoses ETC. and you should be good to go.
458 of 535 people found this instruction helpful.
Was this instruction helpful to you?
Vincent from York, ME
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
WP3951744
Top section of agirtator not working
Removed top cap and one nut from agirtator then removed complete assembly. Replaced new assembly nut and cap.
34 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Joel from Rhoadesville, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WP3951744
plastic dogs wore out
replaced complete agitator to be on the safe side. Cheap enough fix.
21 of 619 people found this instruction helpful.
Was this instruction helpful to you?
Lawrence from Arizona City, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
WP3951744
Clothes were not coming out as clean as they were previously.
I first removed the softener container by simply pulling it up & out. Secondly, I removed the 7/16" bolt that held the agitator in-place & again, simply pulled the agitator up & out. Then I placed the new agitator in, replaced the 7/16" bolt and the softener container - job complete (that simple).
20 of 618 people found this instruction helpful.
Was this instruction helpful to you?
Mark from San Antonio, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WP3951744
Agitator Not Rotating
Eveything went great. I oldered the part on Sunday evening...received shipping notification on Monday... part arrived Tuesday. Wow! I must say, I am not an appliance repair technician. The job was easy...real easy! I lifted off the softner reservoir...losened a bolt...removed the old agitator...installed the new agitator...tightened the bolt....put the softner reservoir back on....job done. I certainly will buy from this site again. Thanks PartSelect and Staff...Outstanding Service (5 Star)!
20 of 618 people found this instruction helpful.
Was this instruction helpful to you?
doug from spokane, WA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
Parts Used:
WP3951744
Agitator was not working properly due to broken plastic pieces in agitator
First I removed the top of the agitator and then used a socket and ratchet to unscrew the bolt and put the new one on and tightened up the bolt, real easy.
20 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Steven Lemons from Fort Greely, AK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WP3951744
washing machine would not agitate clothes during cycles
first I removed the fabric softner and water seal from center of agitator, then I removed the bolt holding it on. All I had to do then is install new agitator with old bolt place water seal and fabric softner container back on and start washing clothes again. Very simple.
15 of 18 people found this instruction helpful.
Was this instruction helpful to you?
CHRISTI from NEWPORT NEWS, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
WP3951744
Making Alot Of Nosie While Washing
First I removed the fabric softner dispenser. Then I removed cap took screw out removed agitator asseembly put new one in then I put screws back in.
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Robert from Whiteman AFB, MO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WPW10072840, WP3951744, WP358237
Upper agitator would not turn
First I removed the fabric softener dispenser. I removed the inner cap seal and agitator retaining bolt. Then I firmly pulled up on the agitator to remove the complete agitator assembly. I replaced the inner cap seal and installed the new agitator bolt with rubber washer. I placed the new agitator assembly on the drive shaft and tightened the bolt. Lastly I installed the inner seal and the fabric softener dispenser. The total time spent was around 10 minutes.
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Rich from Arnold, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
Parts Used:
WPW10190965, W10833899, WP3951744
Washer top adgitator / Frig. Ice maker not producing
Washer; I watched the repair video, and replaced the agitator. It was so simple I think that it took longer to watch the video. Refrigerator; I replaced the ice maker, and the solenoid valve. It was very easy to replace the parts, however it took a while to diagnose the problem. I found an appliance repair man that told me what contact points on the front of the ice maker would trigger the clock (so I didn't have to wait for an hour for the clock to activate). There is also a set of contacts that when jumpered will trigger the solenoid valve. It only took a total of 25 minutes to fix both the washer, and the dryer. If you take a piece of 14 Ga. solid wire about 6" long and strip the ends about 3/8" and bend it into a U you have a jumper. If you jump the contact points on the front of the icemaker letters T & H this will start the clock operation. If you jump letters L & V, the solenoid should open to allow water to flow to the tray. If water does not flow, the filter should be checked in the valve. If the valve sounds like it is opening, sometimes the inlet to the ice maker can freeze stoping the flow. In my case I found the solenoid valve was getting only a week signal, and would only function about 25% of the time.
9 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
11 Reviews
3.8
out of 5
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    1
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Stars
    2
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11742049
Manufacturer Part Number: WP3951744
Brand
Model Number
Description
Whirlpool
1CLSQ9549PG0
Washer - Residential
Whirlpool
1CLSQ9549PG1
Washer - Residential
Whirlpool
1CLSQ9549PW0
Washer - Residential
Whirlpool
1CLSQ9549PW1
Washer - Residential
Whirlpool
1CWTW4800YQ1
Washer - WASHER
Whirlpool
1CWTW4800YQ2
Washer - WASHER
Whirlpool
1CWTW5200VQ0
Washer - Residential
Whirlpool
1CWTW5200VQ1
Washer - Residential
Whirlpool
1CWTW5300VW0
Washer - Residential
Whirlpool
1CWTW5300VW1
Washer - Residential
Whirlpool
1CWTW5500SQ0
Washer - Residential
Whirlpool
1CWTW5500ST0
Washer - Residential
Whirlpool
1CWTW5520SQ0
Washer - Residential
Whirlpool
1CWTW5700SW0
Washer - Residential
Whirlpool
1CWTW5790VQ0
Washer - Residential
Whirlpool
1CWTW5790VQ1
Washer - Residential
Whirlpool
1CWTW57ESVW0
Washer - Residential
Whirlpool
1CWTW57ESVW1
Washer - Residential, Automatic
Whirlpool
1CWTW5800SG0
Washer - Residential
Whirlpool
2DLSQ7533JQ0
Washer - WASHER
Whirlpool
2DLSQ7533JQ3
Washer - Residential
Whirlpool
2DLSQ7533JQ4
Washer - Residential
Whirlpool
2DLSQ7533JQ5
Washer - Residential
Whirlpool
2DLSQ8000JQ0
Washer - Residential
Whirlpool
2DLSQ8000JQ3
Washer - Residential
Whirlpool
2DLSQ8000JQ4
Washer - Residential
Whirlpool
2DLSQ8000JQ5
Washer - Residential
Whirlpool
2DWTW4800YQ0
Washer - Residential, Automatic
Whirlpool
2DWTW4800YQ1
Washer - WASHER
Whirlpool
2DWTW5405SQ0
Washer - Residential