Part Location Diagram of WP37001036 Whirlpool Cylinder Glide Bracket
See part 4 in the diagram
Replacing your Amana Dryer Cylinder Glide Bracket
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Cylinder Glide Bracket WP37001036

★★★★★
★★★★★
2 Reviews

Rated by 14 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 60.73
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11741912
Manufacturer Part Number WP37001036
Manufactured by Whirlpool
Product Description

Cylinder Glide Bracket Specifications

These brackets support each side of the tub. Order quantity needed.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Amana Dryer Cylinder Glide Bracket

Replacing your Amana Dryer Cylinder Glide Bracket
Troubleshooting
This part fixes the following symptoms:
Noisy | Marks left on clothes
This part works with the following products:
Dryer.
This part works with the following products:
Amana, Maytag, Crosley, Magic Chef.
Part# WP37001036 replaces these:
AP6008772, 37001036
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 14 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
lots of noises
disassembled found bunch of worn out parts . I went to website wich was very helpful found all . my worn out parts online. dryer is very quiet now I wish i would have done it sooner.P.S. going to fix my dads dryer next. thank you
Other Parts Used:
Single Felt Pad Drum Glide Cylinder Felt Seal Drum Support Roller Cylinder Glide Bracket
  • joe from johnsburg, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
18 of 644 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was not drying properly. Making a rubbing noise metal to metal sound.
First had to remove the front panel after lifting the top up on its hinges and supporting it. Diconnected wires to the front panel after marking them where they go. Saw where drum was rubbing above the impeller housing for the fan. Removed the drum slides and replaced them with new slides and brackets. Removed the belt and replaced it. It is a little tricky with the belt on the tensioner so pay close attention on how you remove it, it will make putting the new one on easier.Replaced the felt gasket with high temp glue. Cleaned inside and outside of cabinet. Put the panel back on,hooked up the wires and it looks and runs like new again.
Other Parts Used:
High Temperature Adhesive - 2oz. Multi Rib Belt Drum Glide Cylinder Felt Seal Cylinder Glide Bracket
  • David from Pasadena, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Felt seal was shredded and glide bracket was worn through
The on-line video showed the dryer top being loosened from the front as the first step. On our dryer, the bottom panel in the front needed to be removed first - two screws, then the front panel(with door)- two more screws and two wires for the switch. Next was the front guide panel - four screws. The glide brackets bolted to this panel and the felt seal was glued to it. Reverse the process to put it all together, and my wife was happy again.
Other Parts Used:
High Temperature Adhesive - 2oz. Single Felt Pad Drum Glide Cylinder Felt Seal Cylinder Glide Bracket
  • Jack from Nashwauk, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noisy tumbler
lift top of dryer up.took 2 bolts to take front of dryer off. 4 more bolts replace the parts put back together and your done .Easy as pie 30 mins tops...
Other Parts Used:
Drum Glide Cylinder Glide Bracket
  • Roy from Lodi, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer made marks, then noise, then more noise
Thanks to this website we were able to not only find the parts, but a video that told us how to take the dryer apart. Unfortunately, between the time we diagnosed the problem, ordered the parts, and they arrived, the drum had worn into the front bulkhead. We were able to file the sharp parts dull and install the brackets, felt pads, and drum glides along with the felt seal, but ended up breaking the dryer door switch. Once that came in, it has been working. I'm not sure how long the repair will last, but it was much better than buying a new one.
Other Parts Used:
High Temperature Adhesive - 2oz. Single Felt Pad Drum Glide Cylinder Felt Seal Cylinder Glide Bracket
  • Chad from Caldwell, ID
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
19 of 502 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer banging and clothes getting stuck between tub and felt pad while tumbling.
Very easy repair. I took off the bottom fromt panel with a nut driver. Then I took off the face/door panel. Take note of the wires that need to come off by marking them with a sharpie or tape. The top of the dryer can be stood up to allow access to the ductwork that has the felt pad on it. The felt pad was worn through in spots, the drum glide was completely gone and both cylinder glide brackets were almost completely worn through. I just replaced the brackets and the pads. The old felt came off fairly easily. I scraped the old glue for the felt off with a knife and cleaned and dried the surface before applying the hi temp adhesive. I waited 1 minute while the glue became tacky (be careful, the glue starts out thin and tends to run) and the felt pad was easily put back in place with my wife's help. Everything was very simple and it cost $87.00 for parts and shipping. I felt that this should be a good investment since I have had no other problems with this dryer and this is normal wear and tear. Better than paying $600+ for a new dryer. The video for changing the felt pad was very detailed and easy to follow as well.
Other Parts Used:
High Temperature Adhesive - 2oz. Drum Glide Cylinder Felt Seal Cylinder Glide Bracket Single Drum Glide Felt Pad
  • christopher from sycamore, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
12 of 382 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
When the dryer was on it would still tumble, but made an aweful sound
My son n law took the fron off the dryer, whilw I looked on the inertnet to locate whatever part we would find to be in need of. He pulled the front panel off and the drum out to dicover it was the bracket and glide. They were easily replaced by popping the bracket out and snapping th new one in then placing the guide on it proper spot.
Other Parts Used:
Drum Glide Cylinder Glide Bracket
  • Vicky from Browns Mills, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy - Clothes getting stuck between drum and bulkhead
1) Removed lower panel
2) Removed door
3) Removed Front Panel - removed connectors from switch and marked connections
4) Removed Front Bulkhead
5) Glides and Felt pads were missing, and brackets were nearly worn through
6) Removed and Replaced old brackets
7) Attached self-adhesive felt pads
8) Attached Drum Glides
9) Removed old felt seal
10) Glued new felt seal in place with 5-min epoxy
11) Allowed Epoxy to set and stop stinking
12) Re-attached front bulkhead
13) Re-attached remaining parts

Dryer works great, is quiet again, and no longer eats clothes!!!!!!
Other Parts Used:
Single Felt Pad Drum Glide Cylinder Felt Seal Cylinder Glide Bracket
  • Jeffrey from Medina, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
81 of 93 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum not turning
First of all I think this was an assembly issue, cause it was a bit noisy since we bought it, but I dismissed it as a break in noise & it would go away over time, but of course it just got worst ontil it failed....
Anyway 1st thing I did was, stick a standard screwdriver between the top & front, to pop the top off, then used a socket wrench set to remove the 2 screws for the front panel assembly, ( **taking note were what color wire connectors went were 3 for switch "y,g,b" & 2 for light "yb & g"), then used socket wrench set to remove 4 screws for the front bulkhead, ( upon removal I now understood what the noise was all about, the lip of the drum was rubbing against the bulkhead & both cylinder glide brackets, wearing the drum lip & cylinder glide brackets, down to shards of metal, rasor sharp, Both brackets were wore in half & bulkhead damaged ), then I removed the shards from the drum & used the hamer to dull & round a smaller drum lip, then I removed lint trap holder from bulkhead, ( since I had it apart I took it outside & cleaned it with my power jet hose attachment ), then I removed missalined & Damaged cylinder seal, srcapped bulkhead clean with standard screwdriver, applide goop glue to bulkhead & new cylinder seal, then applide new seal & let dry overnite, in the mean time I removed both damaged (the other half), cylinder glide brackets, used the old gliders & pads, ( they were not damaged, " LIKE NEW"???), attached them to the new bracket, then attached the 2 cylinder bracket assemblies to the bulkhead, then I used metal tape (several layers on both sides of bulkhead) to fix the damage caused by the old missalined seal & drum lip.... Then I re-assmembled lint trap holder to bulkhead, & re-assembled bulkhead to dryer, then attached the front, ( see above**), then popped the top into place... Now we have a GOOD QUIET dryer
Other Parts Used:
Cylinder Felt Seal Cylinder Glide Bracket
  • Dean from Minneapolis, MN
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the glide brackets cut right thru.
The repair would have went much better if the pads came with the two new brackets I bought. I had to use the old one after having the whole dryer apart. You should be more specific that they were not included.
  • Carol from Nokomis, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Be the first to ask our experts a question about this part!

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741912
Manufacturer Part Number: WP37001036
Brand
Model Number
Description
Admiral
ADE7005AKW
Dryer - Residential
Admiral
ADE7005AYW
Dryer - Residential
Admiral
ADE9005AGW
Dryer - Residential
Admiral
ADG7005AWW
Dryer - Residential
Amana
ALE120RAW
Dryer - Electric
Amana
ALE230RAW
Dryer - Residential
Amana
ALE230RCW
Dryer - Residential
Amana
ALE331RAC
Dryer - Residential
Amana
ALE331RAW
Dryer - Residential
Amana
ALE331RCW
Dryer - Residential
Amana
ALE443RAC
Dryer - Residential
Amana
ALE443RAW
Dryer - Residential
Amana
ALE443RCW
Dryer - Residential
Amana
ALE565SAC
Dryer - Electric
Amana
ALE565SAW
Dryer - Electric
Amana
ALE643RAC
Dryer - Electric
Amana
ALE643RAW
Dryer - Electric
Amana
ALE643RBC
Dryer - Residential
Amana
ALE643RBW
Dryer - Residential
Amana
ALE643RCW
Dryer - Residential
Amana
ALE665SAC
Dryer - Electric
Amana
ALE665SAW
Dryer - Electric
Amana
ALE866SAC
Dryer - Electric
Amana
ALE866SAW
Dryer - Electric
Amana
ALE866SBC
Dryer - Residential
Amana
ALE866SBW
Dryer - Residential
Amana
ALE866SCW
Dryer - Residential
Amana
ALE868QAW
Dryer - Electric
Amana
ALE956EAC
Dryer - Electric
Amana
ALE956EAW
Dryer - Electric
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service