Maytag/Maytag_Thumb/TEBJZIYW.gif
See part 4 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Agitator Bolt

★★★★★
★★★★★
8 Reviews
$ 6.08   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11741866
Manufacturer Part Number WP358237
Manufactured by Whirlpool
Product Description

Agitator Bolt Specifications

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not agitate | Noisy | Pumps but will not spin | Shakes and moves
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Roper.
Part# WP358237 replaces these:
AP6008726, 285009, 357082, 357083, 357231, 358237, 358500, 359198, 97831, WP358237VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

12 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
October 26, 2017
What is the size and measurement of the 7/16 bolt that connects the agitator
For model number cabrio
Hi Brian, Thank you for your question. If this is the bolt that you are referring to, the size of the bolt is in the title for the part: 5/16-24 x 1. I hope that helps. Good luck with your repair.

7 people found this helpful.

Was this helpful?
Thank you for voting!
David
January 8, 2018
Doi need to buy an additional washer (#20) or does the gasket on the screw (#4) serve as the washer? The screw is $4 and the washer by itself is $5. Weird.
For model number 1DNET3205TQ0
Hi David, Thank you for your question. If you purchase number 4 in the diagram, you will get both the screw and the washer. You do not have to purchase the washer separately. I hope this helps. Thank you and have a great day!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Rick
January 25, 2018
I would like your suggestion.The head of the hex head bolt is stripped. How can i remove the old one this is the part number partselect number ps11741866 Manufacturer part number wp358237 thanks rick gates
For model number PartSelect Number PS11741866
Hello Rick, Thank you for your inquiry. I would try a pair of pliers first. The other suggestion would be to use a rotary tool to cut a slit in the head of the screw and see if you can remove it with a flat head screwdriver. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
James
February 12, 2020
Stop spinning?
For model number gjxrp080b0ww
Hi James, thank you for your question. There are a number of parts that could cause this issue, however you may want to first check your belt and the agitator coupling for the normal wear and tear that happens. This is that part number for the belt: PS270803 and part number for the coupling: PS1517844. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
George
March 2, 2020
The rope washer use a 11mm socket. Is this bolt going work?
Hello George, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Wendy
May 24, 2019
Ok i dont have the part number. My machine will not do the spin cycle. Would this be the part i need. I have a Kenmore washing machine
Hello Wendy, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Elaine
November 7, 2019
I have an old Kenmore elite 3 speed automatic washer, with agitator, sn#cm1716414, type 111 large tub washer. Not sure how old it is. It stopped spinning the water from the drum, and when i turn the dial to another spin cycle it makes a humming or "stuck" noise (not loud at all). Are parts still available for this machine.?
For model number 23012100 (100 is small case numbers)
Good Day Elaine. Thank you for your question in regards to your unit. The following link will bring you to a list of parts that you may need to replace on your unit to solve your issue. The parts would be compatible with your unit: https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=11023012100&mfgModelNum=&fkMfgID=3&ModelMasterID=13658&PID=26. Hope this helps. Best Regards.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Matias
April 30, 2018
All seems to work well but laundry comes out not clean - as if there is an issue with some residue on parts or something clogged and not allowing the machine to fulfill its mission... maybe someone has some ideas where to start? thanks!!!
For model number Admiral Capacity Plus Model # LNC6760B71
Hi Matias, Thank you for your question. If you are finding residue on your clothes, there are a number factors that may be to blame. This could be the result of pocket lint, undissolved laundry detergent, too much detergent being used, a dirty washer, overloading the wash cycle, unsorted clothes, hard water and a clogged or faulty water pump. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Richard
January 16, 2019
Trying to remove agitator bolt to replace clutch , bolt is rusty and a 7/16 socket doesn't seem to fit, your parts list says its a 5/16 screw, is the head a 7/16 or 5/16? This agitator is starting to agitate me. Thanks Richard
For model number 110-26852501
Hi Richard, Thank you for your question. There is a video listed with the part on our website that you may reference on how to remove the bolt. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Rick
May 23, 2019
Agitator bolt will not loosen. Counter clockwise loosen, correct? Any tricks to backing out a bolt that might be "frozen". Thanks
For model number rtw4640yq1
Hello Rick, thank you for contacting us. Yes, turn counter clockwise. If it is stripped, try using a pair of pliers instead. We hope this helps.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Kenmore Washer Agitator Bolt

Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 55 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Washer made a loud banging noise at end of spin cycle, leaked water and agitator seemed loose
After entering the model number of your appliance you will be taken to a page where all of the parts are displayed by sections. On that page about in the middle there is a heading called "Find Part By Symptom." I figured out from there which symptom the washer had and read what other people were saying and how they made the repairs. Basically I had three problem areas, Noise, Leaking and a problem with the agitator. I focused on the loud noise first and decided I needed to replace the clutch/brake assemblies. I found the clutch parts page and on that page there was a video on how to make this repair. This video is all you need to gain access to all moving parts located under the cabinet. Which ever part you are replacing, I recommend watching this video! After removing the console, back panel and cabinet then laying the machine on its back just as seen on the video, I had access to the water pump, motor, transmission and related clutch/brake parts. As it turned out I did not need the clutch/brake assembly but as a precaution and because the parts were cheap, I replaced the motor coupling, water pump and tub wear pads. I decided to replace the agitator assembly because of several worn parts associated with the dog ears/drive shaft ETC. I put the machine back upright and took off the top cap on the agitator, then there is an inner cap with seal that gives access to the 7/16" bolt you must remove to remove the agitator. However once the agitator was removed I noticed metal shavings and play in the shaft. I used a spanner wrench to remove the spanner nut. I removed the Plastic Tub Ring (has several clips around the outer tub), then removed the inner washer tub to replace the Drive Block. Replacing the Drive Block stopped the loud noise at the end of the spin cycle. Now just reverse the order to put the machine back together and your done. For my situation it was best to take the machine apart and decide which parts I needed before ordering to minimize errors. These machines are made very cheaply and are designed to brake at some point in time and it is very easy to determine which parts are worn because most are made of plastic. In this process I also noticed where my leaks (did I say Leaks) were coming from. There were two hose clamps installed improperly from the factory, so check all clamps, hoses ETC. and you should be good to go.
471 of 552 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top part of agitator (auger) was not turning
Using kit 285587 was straight forward. Removed fabric softener dispenser & sealing cap. It took more time to find the socket set (needed a 7/16 socket) with a long driver (10 inch) than to unscrew & remove the auger & agitator.
Cleaned up the bowl whilst it was apart (good buildup of junk under the agitator). Replaced agitator, new thrust washer to find that grease should be applied but isn't included in kit (get part not 350849). Grrr.... Applied new auger, cam, dogs and holder. (No instructions in kit for assembling cam, dogs & holder, but you can work it out ok). Applied new bolt & washer, new seal on cap. Installed fabric softener. Could have been a 15 minute job but peace and quiet in the garage makes it worthy of taking longer ;-)
170 of 194 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cam dogs worn out and the agitator wouldn't rotate.
Removed softner dispenser on top of agitator. Removed next was cap and seal cover at base of the agitator by just pulling it up. Used 1/4" drive w/ 7/16" socket w/long extension to remove the agitator mounting bolt. While holding the bottom of the auger, pull the agitator up, removing the top agitator assembly. Replace the necessary worn parts. Read the directions which came with your ordered parts. Also, the agitator grease which you are to use to lube the top of the Thrust washer is not included in the repair kit. You can use non water soluable grease to lube the thrust washer or order part number 350849. Total time, 15 minutes. Happy washing...
  • Raymond from Speedwell, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
  • Parts Used:
    WP358237, WP3363003, 285811, 285587
30 of 705 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator top not working
Repair was very easy for me and I have three fingers missing on one of my hands. Video on repair was also very detailed. I ordered three extra parts that were already included in the agitator kit. Would have been nice if all parts were listed that came in the kit and add a small tube of the grease. Delivery time was great! I would order from this company again, I was very pleased. I have already referred a friend to the site for her repairs.
25 of 702 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper agitator not working
Read the directions in the repair kit first- a 7/16" socket and 10" extension is needed. Assembled new dogs on agitator "cup" and retainer, added marine(waterproof) grease to assembly washer, replaced bolt anyway and installed new o ring. Took less than 15 minutes-READ ALL DIRECTIONS FIRST!
  • Eric from Saint Petersburg, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
  • Parts Used:
    WPW10072840, WP358237, 285811
22 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The teeth on the one-way clutch of the upper part of the agitator were stripped.
The directions that came with the parts were very helpful.

1. Removed the softener dispenser.
2. Removed the bolt at the bottom of the exposed agitator.
3. Pulled up the agitator assembly.
4. Installed new parts.
5. Reversed process.
18 of 352 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator wasn't working
I'm really impressed with this website. I was able to quickly diagnose the problem with my machine. I watched the video and thought that this was something that I might be able to do myself. I'm a woman and I like to understand how things work and do my own repairs when I can. My machine is over 16 years old, so I had to scrape some waxy-like buildup from the inner cap before I could remove it. Other than that, I followed the instructional video, which was excellent. I found that I did not need the inner cap seal that I had ordered because a new one was included in the agitator repair kit.
  • PATRICIA from ORINDA, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
  • Parts Used:
    WP358237, 350849, 285811
15 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer's Agitator wasn't working
Basic replacement so easy my nine yr old daughter did the needed repair we watched the video on your web site Way to go Alexis . Ten minutes later all done ! Probably saved a few hundred dollars or more, no service calls or no need to replaced our beloved washer (Cira 1994) they really don't make them like this anymore, will use your company again if needed Thanks !!!
  • David from Barrington, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
  • Parts Used:
    WP358237, 285565
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Agitator & cogs wore out
I pulled the cap and took a socket wrench turned the stud agit off and removed the upper agitator. Than I assembled the new agitator with the new clogs put the agaiator back on and tightened the stud agit. Replaced new cap and done! Easy job!! Everything is working like new again. This whirlpool washer is 14 years old and still going strong!
13 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper agitator would not turn
First I removed the fabric softener dispenser. I removed the inner cap seal and agitator retaining bolt. Then I firmly pulled up on the agitator to remove the complete agitator assembly. I replaced the inner cap seal and installed the new agitator bolt with rubber washer. I placed the new agitator assembly on the drive shaft and tightened the bolt. Lastly I installed the inner seal and the fabric softener dispenser. The total time spent was around 10 minutes.
  • Robert from Whiteman AFB, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
10 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.4
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11741866
      Manufacturer Part Number: WP358237
      Brand
      Model Number
      Description
      Kenmore
      10682872600
      Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
      Kenmore
      110088732791
      Washer Dryer Combo
      Kenmore
      11010202000
      Washer
      Kenmore
      11010202001
      Washer
      Kenmore
      1101050299
      Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
      Kenmore
      11010502990
      Washer
      Kenmore
      11010502991
      Washer
      Kenmore
      11010852990
      Washer
      Kenmore
      11010852991
      Washer
      Kenmore
      11012202100
      Washer
      Kenmore
      11012502100
      Washer
      Kenmore
      11012852100
      Washer
      Kenmore
      11013202200
      Washer
      Kenmore
      11013212200
      Washer
      Kenmore
      11014102300
      Washer
      Kenmore
      11014112300
      Washer
      Kenmore
      11014202300
      Washer
      Kenmore
      11014212200
      Washer
      Kenmore
      11014222300
      Washer
      Kenmore
      11014502300
      Washer
      Kenmore
      11014852300
      Washer
      Kenmore
      11015732400
      Washer
      Kenmore
      11015842400
      Washer - Kenmore Washing Machine
      Kenmore
      11015852400
      Washer
      Kenmore
      11015862400
      Washer
      Kenmore
      11015864400
      Washer
      Kenmore
      11015942400
      Washer
      Kenmore
      11015942401
      Washer
      Kenmore
      11015944400
      Washer
      Kenmore
      11015944401
      Washer

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service