I am replacing the seals at the top of the spin tube along with the transmission and was seeing grease inside the spin tube and was wanting to know where it came from. Thanks. By the way the old transmission was noisy when it agitated but did not leak oil.
For model number RTW4440VQ1
Hello Ronnie, Thank you for the question. We suggest checking the Oil Seal Kit for Gearcase Input Shaft, PartSelect Number PS334494. We hope this helps.
Is this the same seal that fits into the transmission pinion gear at the bottom of the drive shaft. Saw one being removed and fitted with a new one on a DIY, but am unable to find the DIY video. Please help. Tommy
For model number 110.28942890
Thank you for your question. Based on your description, this would not be the correct part. The part you are looking for is sold with the basket drive assembly with clutch. The part number listed under your model number for the basket drive assembly with clutch is FIX11723156. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Average Repair Rating: 2.4 / 5.0, 2 reviews.
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The motor turned with loud noise ,but nothing else worked
I used "Emley's Cheap and Easy Repair" book to remove,install and reassemble the machine. A lot of time was used to clean the filthy tub and basket. While replacing the broken motor coupling I decided to replace some of the seals. PartSelect got the ordered parts to me in a couple of days. I wouldn't hesitate to do the job again.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
78 of 171 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was leaking underneath machine
While taking apart my washing machine to clean the plastic basket I discovered the 3 main seals down the agitator were completely disintegrated and water was leaking onto the motor and onto the floor. The seals are a tight fit but slide into place easily with lubrication. When putting everything back together a bit of lubrication will be necessary as well. The leak is gone and my nearly 30 year old washer is working as well as the day it came off of the assembly line.