Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This burner cap assembly is sold with the spark electrode igniter and has a 7-inch outer diameter. This manufacturer-approved surface burner is for gas ranges. The surface burner supplies the heat to a cooking area on the cooktop. You may need to replace your burner cap if the gas igniter glows but will ignite the flame, the range will not start, or if you can smell gas. Because a faulty burner cap could lead to a house fire, it is recommended that you replace this part as soon as you realize it is faulty. Remember to unplug the range, turn off the gas, and let the unit cool down before starting this installation.
Note: this part has been redesigned and no longer requires a gasket, and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Susan K - January 8, 2021
Verified Purchase
Fred
The burners are a great replacement part for the stove. They only work on three of the burners. The left rear burner is wired differently so it would not work on that one.
★★★★★
★★★★★
Marlene B - May 6, 2019
Verified Purchase
it didn't fit burner that needed replacement but Bill switched it to another burner where it fit and used that burner.
The part arrived promptly and was in good condition
★★★★★
★★★★★
Thomas N - March 7, 2018
Verified Purchase
Replaced burner cap with ease
Delivery was excellent. Part was very easy to replace. My wife is happy!
★★★★★
★★★★★
William B - January 5, 2020
Verified Purchase
Easy repair
We bought 2 of these. They came quickly and were SO easy to replace. Hubby was done in less than a half hour with repairing both burners..
★★★★★
★★★★★
MERLE B - February 18, 2021
Verified Purchase
Easy Repairs
I actually ordered 2 burners.
The regular burner went straight forward. That is, male and female wire attachments were all the same size.
The power burner required a larger female part to be installed, since the male part came larger. I did have this part, so needed to cut off the old one with wire cutters and crimp on the new larger one.
Time for all of this= 45 minutes
All of this was completed once I unplugged the power cord from the outlet for safety.
Thanks!
★★★★★
★★★★★
David S - April 28, 2021
Verified Purchase
Good service.
Good service. Knowledgeable sales person. Fast shipping. Thank you. Would readily recommend your service.
★★★★★
★★★★★
Pam Y - January 13, 2022
Verified Purchase
Excellent quality
My stove works perfect now, thank you
★★★★★
★★★★★
Timothy L - March 2, 2024
Verified Purchase
Like new
Burner hasn't worked like that for a long tim
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 27 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No spark, bad igniter
1. Grab the old burner and twist counter-clockwise. 2. Unplug the wire from the old igniter, simply pull off. 3. Take new burner/igniter (this new one comes all-in-one) and reattach the wire to the igniter underneath. 4. Place the burner so the 'nubs' line up with the stove top and then twist clockwise a short amount, it should tu
... Read morern slightly to lock in place. 5. Test. Mine sparked and started better than it has since i have had the stove
Read less
Tom from REDDING, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old sealed burner cap had rusted out allowing gas flame around the base of the cap.
Note the position of the electrode on the side of the old burner cap. Turn the old burner cap one-eighth turn counter-clockwise to loosen and remove it. Raise the burner cap and disconnect the push-on connector wires from the ground and electrode. Clean the surface and connect the electrode and ground connector wires correctly to the n
... Read moreew burner cap and place the burner cap back in the opening, positioning the electrode at the same orientation as it was with the old burner cap. Turn the cap one-eighth turn clockwise until the burner is snug. Turn on the burner control to test that the burner functions correctly. Make sure there is no smell of propane or gas when the burner is not in use which might indicate that the burner is not properly fitted snugly.
Read less
John from Stephentown, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner worn out
Turned burner about 1/16 turn to left. Lifted burner from stove. Disconnected two wire connectors. Connected same wires to new burner. Set burner in place and turned 1/16 turn to right. Tested burner. Lighter worked on first attempt and burned perfectly. Took about 3 1/2 minutes.
Robert from LORENA, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
BURNER DID NOT IGNITE. HOLE ON SIDE OF BURNER HAD A HOLE, SO FLAME WAS UNEVEN.
USED CHANNELOCK PLIERS TO ROTATE BURNER COUNTER-CLOCKWISE. PULLED OFF THE CONNECTORS, APPLIED RUST TREATMENT TO THE REPLACEMENT PART, WHICH HAD ITSELF STARTED TO CORRODE. SPADE LUGS ON THE OLD PART HAD A SPADE ADAPTER, BUT THE CONNECTION SEEMED TO WORK REGARDLESS OF THE MISS-MATCH. PART WAS REPLACED, TURNING THE BURNER CLOCK-WISE. VE
... Read moreRY QUICK AND EASY REPAIR.
Read less
Kenneth from WATSONVILLE, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Missing gasket under burner caused gas to leak out
I followed the video and it was incredibly easy. I shut the breaker off (we live in an apartment, and pulling the plug on the stove wasn't possible). I lifter out the old burner (the gasket underneath was corroded, and I just threw it out, as the newer burners are self-sealing); removed both the igniter wire and the ground wire (I needed
... Read more a pliers to tug the igniter wire off); attached the new burner; replaced the burner; turned on the power; and voila!
Read less
James from NEW YORK, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sealed burner was rusted out. Had a hole in it.
Unplugged two connectors and plugged into new burner. Couldn't have been easier! Also, I was so pleased that it matched the other three burners exactly!
Jeanne from ELMIRA, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
corroded burners
Unscrew the burners an install new ones! Anyone could do this.
Daniel from Can Francisco, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced burner
Went well
Ramiro from Bernalillo, NM
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners would not ignite flame...Had to start with match.
Removed the old burners with a Plumbing Pipe Wrench by turning 1/4 turn counter clockwise. Disconnected (2) wires and replaced with new Sealed Burners. The simmer burner wires were slightly diffrent from the original but they do fit by opening the connector with screwdriver and then clamping once wire inserted.
Richard from Los Angeles, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original burner was eroded on the bottom and flame was coming from undernealth the burner
Very easy. I disconnected the original burner with one turn as well as the two wire connections for the electronic igniter. I then connected the wires to the same positions on the new burner and placed the new burner in place with one half turn to match the indented openings to secure the burner tightly in place.
Joe from Staten Island, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
August 21, 2017
Narrative for this part says 7"diameter. Grid is slightly under 4", which seems to be the correct figure for my part (range # prg5715bdw). Comment?
For model number PS11741733 (part #)
Hi William,
Thank you for contacting us. Where this part is coming up under your model number it is designed to work for your appliance and it is the correct part. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Wallenstein
October 15, 2019
Hi,
I require the complete set of four (4) burners for my Maytag gas cooktop model number csg7000cae. Can you confirm availability and cost.
For model number CSG7000CAE
Hello Wallenstein, thank you for inquiring. You will need four of these Sealed Burner Caps with Electrode, part number PS11741733 for your model. The price and availability is listed next to the "Add to Cart" button in the part description. To place an order, please feel free to contact customer service by phone or you may do so online. Thank you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Walt
October 1, 2017
Replacement igniter and gasket on under burner.
For model number CHG9800BAE
Hello Walt, thank you for contacting us. Yes, this is the correct part for your model. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
January 3, 2020
There are two sets of burners, front right and rear left are higher btu's, are there different replacement parts and is the gasket no longer necessary ?
For model number 3468VVV
Hello David, Thank you for the question. The Gaskets have been discontinued and no longer needed when the Sealed Burner Cap are replaced. If you need a new gasket you will need to replace the Sealed Burner Cap. PartSelect Number PS11741733 is for both size burners. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mickey
October 17, 2019
None of the stove top burners will ignite from the spark igniter. Is there a central module controlling these spark units or do i have to replace all four burners?
For model number FCG20510W
Hi Mickey, there is the Flat Style Oven Igniter Kit part number PS1573892. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Rita
December 26, 2022
Two burners were easy to replace - twist off and twist on. But two are stuck on and won’t budge. Is there a tool that can wrench them off? Like a plumbers tool for stuck faucets?
For model number 31213
Hi Rita, thank you for contacting us. Mix water and baking soda to create a paste. Apply a thin layer of the paste to the burner heads and caps. Allow them 15-30 minutes. This may take repeated applications. Use a toothbrush or scrub brush to clean and attempt to remove it. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"WP3412D024-26","title":"WP3412D024-26","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
