Moisture Sensor Wire Harness WP3406653

Hello Vernon, Thank you for your inquiry. At room temperature, it should read between 1-10 k ohms. If the circuit is open, it will read infinity. Hope this helps!

Hi Ronald, Thank you for your question. If you are using a multimeter to test the moisture sensor wire harness it should read between 1-10 k ohms. If the circuit is open, it will read infinity. I hope this helps. Thank you and have a great day!

Hi Donald, Thank you for your question. If you are using a multimeter to test the moisture sensor wire harness it should read between 1-10 k ohms. If the circuit is open, it will read infinity. I hope this helps. Thank you and have a great day!

Hello Eric, Thank you for the question. Once installed it is no longer returnable. Here is a link to our return policy. Hope this helps! https://www.partselect.com/Thirty-Day-Returns.htm

Hello Joe, thank you for the question. If you are testing a wire harness moisture sensor and you are getting no resistance reading across the outermost contacts, it could indeed indicate a faulty wire harness moisture sensor. The moisture sensor typically works by measuring the electrical resistance across its contacts, which changes based on the presence of moisture. If you are not getting any resistance reading, it could mean that the sensor is not detecting moisture properly. We hope this information helps!

Hi Joe, Thank you for your question. You can test a moisture sensor with a multimeter. I hope this helps. Thank you and have a great day!

Hi Joe, Thank you for your question. If the dryer is not tumbling, then there are some parts that you will need to check to see which one is causing the issue. You will need to check the drive belt, the idler pulley, the thermal fuse, the rollers and the drive motor. I hope this helps. Thank you and have a great day!

Hi James, Thank you for your question. We have included a link to one of our YouTube videos that you may reference on how to use a multimeter. We hope this helps. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

Hello Marco, Thank you for your inquiry. This can be caused by the dryer overheating so you want to make sure the vents are clear and not blocked. We also recommend checking the wiring harness for any visible damage and check the control board as well for any visible damage. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Ajs, thank you for contacting us. Taking a closer look at the following parts will help you fix your problem: the door catch kit, part number PS334230, the thermal cut-off kit, part number PS334387, the thermal fuse, part number PS11741460, and the moisture sensor, part number PS11741707. Good luck with the repair!