Maytag/Maytag_Thumb/53468.gif
See part 20 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Burner Head

★★★★★
★★★★★
2 Reviews

Rated by 6 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 133.55   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JGA8100ADB!
 Fits your JGA8100ADB!
PartSelect Number PS11741675
Manufacturer Part Number WP3403M075-10
Manufactured by Whirlpool
Product Description

Burner Head Specifications

This surface burner head is for ranges. Surface burner head distributes the gas through holes or slots to create an even flame across the cooking area. Shut off the gas supply and unplug the range before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas smell
This part works with the following products:
Cooktop, Range.
This part works with the following products:
Jenn-Air.
Part# WP3403M075-10 replaces these:
AP6008535, 3403D075-10, 3403M075-10, 74005892
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Steve
    January 16, 2018
    How do I replace the surface burner of a sealed gas surface burner cartridge of JennAir jgd8130ads?
    For model number jgd8130ads
    Hi Steve, Thank you for the question. To remove the burner head you just need to twist and turn to release it. Hope this helps!

    5 people found this helpful.

    Was this helpful?
    Thank you for voting!
    John
    April 15, 2018
    We have a jenn air jds9860aap which has two regular gas burners on the right side (jenn air horseshoe burners on left). The rear reg burner appears to be leaking with a small Jet coming our beneath the regular burner head on one side. This appears to me this may become dangerous. I think it should be replaced with wp3403m075 10. I have not replaced these before. Does this burner head come with instructions and will i need a new sparker to go with this or can i reuse the one i have for this burner head ? It appears that the bottom flange of this burner has corroded slightly and is allowing a small gap where gas can pass through and become ignited.
    For model number jds9860aap
    Hi John, Thank you for the question. The Sparker(Top Burner Igniter) Part Number: PS2082000 is sold separate from the burner head but the old one can be reused if still in good condition. We can not guarantee instructions as the parts are all pre packed by the manufacture, but we do have some repair help online and previous customers have left repair stories on what they did to replace the part. Hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jerry
    November 17, 2019
    Hi. The burners are corroded and i cannot turn them to remove.
    For model number JGD8348CDP
    Hello Jerry and thanks for writing. You need to put some wd 40 oil or similar to let it soak in and then try to remove them with a plier. Be sure TO HAVE ALL FLAMES shut off as the wd40 can burn easily. There is also special; rust removers available that might help your cause. We hope this helps. Please contact us anytime

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Gary
    October 4, 2017
    I have an installation question about the burner head. I took it out to change the igniter which i ordered from you. Now when i put the head back in it is loose. Looking at the other heads its looks like there was some sort of gasket or perhaps some type of putty/sealant that was holding the burner head more firmly in place. I do not see anything like that on the parts diagram. Do you have any suggestions?
    For model number JGD8130ADS
    Hi Gary, Thank you for your question. Actually there is no sealant or gasket that goes with this part. Everything is part of the head itself. Perhaps try and reinstalling it? If you need more specialized assistance, I would suggest contacting a local technician or the manufacturer directly. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Thomas
    December 5, 2018
    My serial number is 23465018gp and the part i need says it is for series 10. Will the spark igniter set (series 10), and burner head (series 10) still work on mine even though i am a series 20? Thanks
    For model number JDS9860AAP
    Hi Thomas, Thank you for your question. Yes, both of these parts will work on your stove. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 2.9 / 5.0, 6 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Gas burner head on stove top rusted out producing blue flame where there shouldn't be
        Removed stove top module and unscrewed the bottom panel. Burner head rotated out fairly easily. I ordered both the burner unit and the igniter just to be safe even though the old igniter still worked. I used the other module as a guide to reassemble the unit. The new burner head was little difficult to rotate back in and did not rotate quite as far as the original so the gas pipe was just a fraction out of alignment but there is some flex so it worked out OK when it was re-installed. Everything worked perfectly when I turned on the burner and there are no gas leaks and no blue flames where there shouldn't be!
        Other Parts Used:
        Top Burner Igniter
        • Joellen from Castro Valley, CA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        66 of 69 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        flames from below the burner
        Replaced fairly easily all 4 burners as the old ones were totally rusted and cracked (the reason why the flame emitted from below the burners)
        • Nikhil from Houston, TX
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        16 of 17 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Gas was escaping from the bottom of the burner causing a big flare up
        Mom and Dad are old now and when a repairman quoted them 225.00 to repair their stove top I told them to tell the repairman to take a hike. I found your website very easwy to navigate and ordered the part which cost about 27.00 with shipping. When the part arrived, I just had to use a phillip head screwdriver and repaced the burner in about 15 minutes. It worked GREAT!!. Mom called me over today for some good homade cooking....Thanks Partselect!!!!
        • Armando from Ovilla, TX
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        12 of 15 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Burner Heads Corroded and Leaking
        Remove 7 screws to remove cover. Disconnect ignitor wire. Unscrew gas supply. Twist burner head to remove (can be difficult). Reverse procedure.
        • Chris from Larkspur, CA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        8 of 9 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Flames appeared outside of burners
        The front burner had a noticible flame coming from the base, so I originally purchased a single burner to replace it (you could see a corroded hole at the bottom). Upon taking the unit apart, I noticed the corrosion was much worse than met the eye. Given the age of the unit and that some parts were already becoming discontinued I decided to gut the whole thing and replace it all.
        The burner unit slides out easily and after unscrewing the sides, you have to disconnect the wires from the underside of the igniters. The venturi tubes and igniters then unscrew from the underside of the burners which twist right out of the assembly. Re-Assembly is very intuitive looking at it and it all goes right back together as it came out. Took 45 minutes total and that includes fighting with some screws that had rusted onto the burner.
        Reading some of the previous reviews, current prices are double to triple what other people did the repair for leading me to believe parts won't be available for much longer. Make the repair while you still can!
        Other Parts Used:
        Venturi Burner Tube Front Gas Tube Brass Seal Appliance Screw Top Burner Igniter
        • John from WAKEFIELD, MA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Back burner would not light. Flame under front burner.
        Because the stove is over 10 years old the screws were very hard to loosen up and I needed to use WD 40 several times to loosen them,after that it was a snap for a 71-year-old woman.
        Other Parts Used:
        Top Burner Igniter
        • Karen J from EAST AURORA, NY
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          More than 2 hours
        • Tools:
          Screw drivers
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          2 Reviews
          4.5
          Filter By Rating:
          • 5 Stars
            1
          • 4 Stars
            1
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11741675
              Manufacturer Part Number: WP3403M075-10
              Brand
              Model Number
              Description
              Jenn-Air
              JDS9860AAB
              Range - Slide-in, Electric-Gas Combo
              Jenn-Air
              JDS9860AAP
              Range - Slide-in, Electric-Gas Combo
              Jenn-Air
              JDS9860ACB
              Range
              Jenn-Air
              JDS9860ACP
              Range - Slide-in, Electric-Gas Combo
              Jenn-Air
              JDS9860BCP
              Range
              Jenn-Air
              JDS9861AAP
              Range
              Jenn-Air
              JGA8100ADB
              Cooktop
              Jenn-Air
              JGD8130ADB
              Cooktop
              Jenn-Air
              JGD8130ADB21
              Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
              Jenn-Air
              JGD8130ADS
              Cooktop
              Jenn-Air
              JGD8130ADS21
              Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
              Jenn-Air
              JGD8345ADB
              Cooktop - Gas
              Jenn-Air
              JGD8345ADB21
              Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
              Jenn-Air
              JGD8345ADB22
              Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
              Jenn-Air
              JGD8348BDP
              Cooktop
              Jenn-Air
              JGD8348CDP
              Cooktop
              Jenn-Air
              JGD8348CDP16
              Cooktop - 48" GAS BUILT-IN DOWNDRAFT COOKTOP
              Jenn-Air
              JGD8348CDP17
              Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service