Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken front glass
Very easy. Take the two top screws out and the two bottom holders off. The bottom holders hold the glass up in place. Grab the handle and pull glass out. To install put handles screws back on the glass and slide in place. Once in place install the bottom holders pieces back on. *** I would buy screws because after years of use the he
... Read moread rust out and sometimes they are hard to get off... all in all very easy to install
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kenneth
February 24, 2020
I am on search of the screws used to attach the handle to the oven door.
For model number RF362LXTS2
Good Day Kenneth. Thank you for your question in regards to your unit (Model Number RF362LXTS2). Based on our research, there are two types of screws that hold the handle to the door. You will see on the handle two holes on each side (for the inner hole the screw that you will need is PartSelect Number PS11740978 and for the outer hole the screw that you will need is PartSelect Number PS11699801). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
What length/size/type of screw is needed to secure the side trim to the oven unit? There are four screws total, two per trim piece, for this double oven.
For model number GBD277PDB7
Hello Eryn, Thank you for the question. Very sorry but the manufacture has not provided us with the thread or screw specs. For more specialized assistance or to speak with someone about this, I would suggest calling Whirlpool directly. We hope this helps!
