This part helps keep the washer from vigorous shaking during its cycles. They are sold individually. They mount to the rear half of the outer tub. Appliance would take 2.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Amana, Inglis.
Part# WP34001292 replaces these:
34001292
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mel
September 30, 2017
I was moving and my back shock damper/absorber came loose. How do i connect the back
For model number MAH8700AWW
Hi Mel,
Thank you for your question. With this particular shock absorber, there is a little head on each end. You slide that into the slot where it is held. Then turn it 90 degrees to lock the part into place. You do the same thing on the drum side as well. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Part Videos
Replacing your Maytag Washer Shock Damper - Rear
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Vibration during spin dry cycle
Moved unit forward to gain access and then removed rear panel with Phillips screwdriver.
At this point it was very important to protect arms and hands due to sharp edges within the unit!
Be advised, the bolts may be a little tight...hence the protection mentioned above. The socket tends to "pop off" due to the awkward angles involved. The washer basket has some nasty little extrusions which can cause blood blisters if you bounce off the basket!
Using 1/2" socket (and small extension) removed mounting bolts and extracted the dampers.
Install new dampers, using thread lock on the bolts.
Re-install the back cover with the Phillips screwdriver and push the unit back in place.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff