11741512-1-M-Whirlpool-WP3400012-Installation Screw

( Grid squares measure 1x1 inch )

11741512-1-S-Whirlpool-WP3400012-Installation Screw

11741512-1-S-Whirlpool-WP3400012-Installation Screw 360 view

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Installation Screw WP3400012

Fits your ED5LHEXTD00 Refrigerator!

Rated by 6 customers

Very Easy

Less than 15 mins

Ratings submitted by customers like you who bought this part.

$ 4.60

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Fits your ED5LHEXTD00 Refrigerator!

PartSelect Number PS11741512

Manufacturer Part Number WP3400012

Manufactured by Whirlpool

Product Description
Troubleshooting
Questions and Answers
Customer Repair Stories
Related Parts
Model Cross Reference

Product Description
Troubleshooting
Questions and Answers
Customer Repair Stories
Related Parts
Model Cross Reference

Product Description

Installation Screw Specifications

This screw is sold individually.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part works with the following products:

Refrigerator.

This part works with the following products:

Whirlpool, Kenmore, KitchenAid, Maytag.

Part# WP3400012 replaces these:

AP6008377, 3400012, W10029760, W10142285

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Carolyn

February 17, 2023

what screw do i need for top of freezer door hinge?

For model number WRS325FDAW01

Hi Carolyn, Thank you for your question. If you need the white screw, the part number listed under your model number for it is PS11752507. If you need the black screw, the part number listed for it is PS11752508. If you would like to place an order for one of these screws, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?

Thank you for voting!

Related Parts:

Screw - Black

$8.99

Screw - White

$30.12

< Prev
1
Next >

Customer Repair Stories

Average Repair Rating: 5.0 / 5.0, 6 reviews. What's this?

< Prev
1
Next >

Sort by:

Fridge door not closing properly.

Romove food and shelves from the door. Remove the 4 screws on the top hinge and higne cover. My door stayed closed but you may need an extra person to hold the door. Lift the door off of the bottom hinge. Replace the parts and re-install. Under 15 minutes total by myself. The door weighs around 20 punds I would guess but again a second person due to the size might be helpful for some.

Other Parts Used:

Bracket, Door Stop (Black)

Lower Door Closing Cam

Chris from NILES, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Refrigerator door not closing properly

We’d had the refrigerator repaired a year ago by the service department of our local appliance store. Turns out the service tech somehow used the wrong screw when replacing the door cam, causing it to rub on the cams and causing premature wear. After watching the provided repair video, it took about 10 minutes to remove the door, replace the cams and reinstall the door. Saved well over $100 and had the job done right this time.

Bruce from MONTGOMERY, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

refrigerator door would not stay closed , I would close the door and it would bounce back out , I had to close the door by holding it closed each time I opened it

I watched the video, removed the top three screws , took the door off , put the door on the floor and removed the part with a socket.Then I put the new part in after lubricating . I picked the door up put it on the stem below , replaced the three screws and closed the door . The video was a big help was very easy to do and the part was quickly shipped .Thank you for all your help . Patricia

Other Parts Used:

Lower Door Closing Cam

Patricia from AUBURN, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The fridge side on side by side was slipping down and door would not close on its own. My daughter and I watched the video and replaced BOTH PIECES

Watched the video and it was very easy!! My daughter and I replaced BOTH CAM PIECES in less than 30 mins. Working like new!

Other Parts Used:

Door Cam - Black

Lower Door Closing Cam

Linda from KANNAPOLIS, NC
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Fridge door would not seal

Removed the door and replaced the lower door cam. Old lower door cam was completly stripped. Insatalled new one and door sealed again! Yay!

Other Parts Used:

Lower Door Closing Cam

Amber from Wilton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The refrigerator door was difficult to maintain closed

Because the lower cams are made out of hard plastic the repeated opening and closing of the door wore them out. The hardest part was taking all of the food that is normally stored in the door.

First step was to determine whether the screws were metric or US standard - they are metric. The next step was to remove the top hinge in order to remove the door and replace the bottom cams and brackets. This took a couple of minutes, replacing the cams was about 5 minutes and putting the door back on the pivot and reattaching the top hinge was another couple of minutes.

If I had called a service tech they would have charged a minimum of two hour and for the parts. I estimate that I saved myself about $100.

Other Parts Used: