Part Location Diagram of WP3399849 Whirlpool One Time Use Thermal Fuse
See part 15 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

One Time Use Thermal Fuse WP3399849

★★★★★
★★★★★
2 Reviews

Rated by 7 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 35.72
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11741511
Manufacturer Part Number WP3399849
Manufactured by Whirlpool
Product Description

One Time Use Thermal Fuse Specifications

This part is a one time use thermal fuse cannot be re-set and must be replaced when continuity between the pins is no longer present.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Washer Dryer Combo, Dryer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, Roper.
Part# WP3399849 replaces these:
AP6008376, 3399849, WP3399849VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
The dryer stop working
Very easy fix. I save my self about $300. Try the fuse first is about $26
  • Francisco from COLORADO SPGS, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not heat
I removed back panel. With the circuit tester I tested the heating coil and the thermostats and the one-time fuse. I found the fuse did not test a circuit. So I ordered the fuse and replaced it. The dryer works fine.
  • John from Fort Lauderdale, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer not heating
After searching on here, I decided to just replace the 3-components listed on this site (not the heating element wire kit). I didn't test the heating element and would save that for last if the replacement parts didn't work. Off the bat the fuse was the problem - no resistence reading on my $6 multimeter like the new one. I didn't bother testing the other components. Since I wasn't sure why the fuse blew I decided to replace the Cycling and High Limit Thermostat at the same time to be safe. It took me longer to move the unit to access the back panel and take off the dozen or so screws then it did to replace the 3 components. The cost of the parts with shipping was less than the trip and diagnostic charge from an appliance repairman.
Other Parts Used:
High Limit Thermostat One Time Use Thermal Fuse Cycling Thermostat
  • james from monument, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat to dryer
The failure was located at the back of the dryer behind the back cover. Removal of thr cover was quite easy and the thermal fuse is located completly in the open. Replacement was a snap after conferming that this was the only problem After testing the cover was replaced and the dryer reinstalled into the original place with no problems.
  • Karl from Palm Bay, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stackable dryer wouldn't heat up.
Replaced the one time use thermal fuse.
  • Lisa from Prescott, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer does not heat
After much grief and finding out that to replace my existing washer/dryer unit would cost about $ 1200, I was doing some research and found Partselect. I replaced two
thermostats and the thermal fuse in the dryer and now it works better than even before it went bad !. Turned out that I did not need the element, but I'm keeping it anyways in case I do at some point in the future.
Other Parts Used:
High Limit Thermostat One Time Use Thermal Fuse Cycling Thermostat Heating Element - 3000W 240V
  • Sean from Portland, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
45 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer ran, but no heat at all.
I removed the hex screws from the fuse, unhooked the wire contacts and replaced with new fuse. I then plugged in the dryer and tried it. It worked!!
I then went on to unplug appliance again, replace the thermostats (while I had the back open and in case bad thermostats could have lead to fuse going bad)... roughly the same process as fuse. We've been enjoying dry warm clothes ever since, and I'm sure that it is running more consistently than it had been for the past several months. I am a repair GOD.
Other Parts Used:
High Limit Thermostat One Time Use Thermal Fuse Cycling Thermostat
  • Christopher from Easthampton, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
27 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741511
Manufacturer Part Number: WP3399849
Brand
Model Number
Description
Kenmore
11080754000
Washer Dryer Combo
Kenmore
11080754001
Washer Dryer Combo
Kenmore
11082182200
Dryer
Kenmore
11084182400
Dryer
Kenmore
11088182890
Dryer
Kenmore
11088182891
Dryer
Kenmore
11088184890
Dryer
Kenmore
11088184891
Dryer
Kenmore
11088752790
Washer Dryer Combo
Kenmore
11088752791
Washer Dryer Combo
Kenmore
11088752792
Washer Dryer Combo
Kenmore
11088752793
Washer Dryer Combo
Kenmore
11088754790
Washer Dryer Combo
Kenmore
11088754791
Washer Dryer Combo
Kenmore
11088754792
Washer Dryer Combo
Kenmore
11088754793
Washer Dryer Combo
Kenmore
11089182990
Dryer
Kenmore
11098518200
Dryer
Kenmore
11098518210
Dryer
Kenmore
11098518220
Dryer
Kenmore
11098518230
Dryer
Kenmore
11098518400
Dryer
Kenmore
11098518410
Dryer
Kenmore
11098518420
Dryer
Kenmore
11098518430
Dryer
Kenmore
11098575110
Washer Dryer Combo
Kenmore
11098575120
Washer Dryer Combo
Kenmore
11098575810
Washer Dryer Combo
Kenmore
11098575820
Washer Dryer Combo
Whirlpool
3LTE5243BN0
Washer Dryer Combo
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service