Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lamar G - June 20, 2018
Verified Purchase
Easy repair
Screw was cross threaded at one time. Wire was not tight and caused it to burn into. Lady has had it 4 yrs. and bought it from Conn's Appliance. Have heard of several other people having the same problem. Any one with a dryer of this make and model should ck. the terminal block wires.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Loose electrical wiring in dryer shorted causing connection to melt.
Replaced power cord, terminal block, and all melted wiring. Checked the thermal fuse for zero resistance.
One of the power cord connections on the terminal block was loose. Screw on terminal block was cross threaded when installed. Took six years to smoke the wire.
Removed and replaced terminal block, power cord and black wire to timer.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cody
November 2, 2017
I need the terminal block screw kit, or even a terminal block that is already assembled with the screws. Is this available?
For model number MED5820TW0
Hi Cody,
Thank you for your inquiry. We do have a terminal block screw kit that includes 3 screws and 3 nuts. The part number for it is PS334188. I hope this helps. Thank you and have a great day!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Neil
January 3, 2018
My dryer had a 3 prong cord when we moved just a few days ago i had to switch it to a 4 prong cord. I looked it up on you tube how to wire it correctly and then i also did a model number search and checked to make sure it was done correctly also. I still can not get my dryer to run. I even replaced the thermal fuse thinking maybe that was it. I then got my multimeter out and checked the voltage on the wall outlet. I get 240 v from hot to hot and 120 v from netural to hot on both sides. I am assuming that my wall outlet is good. So i check the voltage on the on the terminal block. I checked from hot to hot and i get 240 v. I then checked from the black to neutral and i get 0 v. I then checked from red to neutral and i get 240 v witch i do believe i should not get. I am at a complete loss on where to go from here.
For model number WED4800XQ0
Hi Neil,
Thank you for your question. If the dryer will not start, I would check with an electrician to see if there is an issue with the dryer itself, the electrical outlet or the circuit breaker in your house. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Brenda
February 7, 2020
What do i need, terminal block wires get very hot
For model number 110.66752500
Hello Brenda, thank you for your question. The element wires could be getting too hot because the temperature of the element is getting too high or the switch is malfunctioning. We would recommend replacing the switch, element and wires. I hope this helps.
Was this helpful?
Thank you for voting!
Kevin
February 27, 2022
I need terminal block and screw
For model number NED4655EW1
Hello Kevin, thank you for writing. The Terminal Block Screw Kit is part PS334188 and the block only is PS11741489. We hope this helps.
Was this helpful?
Thank you for voting!
Shannon Pewewardy
December 28, 2019
This part #3397659 I need the screw part to put wires to screw them on.
For model number Wgd4800bq2
Hi Shannon, this part is not compatible with your model Wgd4800bq2. If you need the screw for the power cord wire that is PS11731161. Thank you for your question and good luck with your repair!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Wire Plug or Connector","title":"Wire Plug or Connector","url":"/Dryer-Wire-Plugs-and-Connectors.htm"},{"position":3,"name":"WP3397659","title":"WP3397659","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
