Disposable Thermal Fuse - Two Terminal WP3390719 | Official Whirlpool Part | Fast Shipping | PartSelect
We’re open and continuing to ship packages, however we are experiencing shipping delays. Call volumes are high, please use our self-serve options to cancel or return your order. Learn about our response to COVID-19
Disposable Thermal Fuse - Two Terminal – Part Number: WP3390719
Disposable Thermal Fuse - Two Terminal – Part Number: WP3390719 Disposable Thermal Fuse - Two Terminal – Part Number: WP3390719 Disposable Thermal Fuse - Two Terminal – Part Number: WP3390719 https://partselectcom.azureedge.net/Schematics/Whirlpool/2P1RJX1P.gif

Disposable Thermal Fuse - Two Terminal

PartSelect Number PS11741444

Manufacturer Part Number WP3390719

Manufactured by Whirlpool

Product Description

Disposable Thermal Fuse - Two Terminal Specifications

This part attaches to the exhaust duct of your clothes dryer.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part works with the following products:

Dryer, Washer Dryer Combo.

This part works with the following brands:

Kenmore, Whirlpool, KitchenAid, Maytag.

Part # WP3390719 replaces these:

279650, 3389639, 3389640, 3390719, 660877, 688841, 690198, 690798, 80004, WP3390719VP.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Part Videos

Replacing your Kenmore Dryer Disposable Thermal Fuse - Two Terminal

Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 21 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Russell from LA VERNE, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
Parts Used:
W11050897, WP3390719, WP338906, WP3387134
dryer would not heat.
I checked parts select.com and followed the guide lines,ordered the correct parts thanks to the web site help.parts arrived in 2 days,A very easy install and back to work drying clothes.Thanks parts select.
149 of 164 people found this instruction helpful.
Was this instruction helpful to you?
JEFFERY from ABINGDON, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
WP3390719, 279570
dryer wouldn't dry
un pluged it then removed the hose took the back off took out the 2 screws out of each part replace it with the new parts , then pluged it back to make sure it would work and it did the very first time. i'm 1 happy roper owner.
106 of 187 people found this instruction helpful.
Was this instruction helpful to you?
Olive from Williamsburg, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
WP3390719
Dryer wouldn't turn on
Removed the back of the dryer taking off the screws. Found the disposable thermal fuse. Unplugged the 2 blue wires connected to it. Removed the screws holding the part in. Replaced the old part. Reattached the blue wires. Put the back on the dryer. And voila! That simple!
I'm a 39 year old woman with absolutely no patience for tedious jobs, but this was so easy I felt good about doing it. And felt even better for saving lots of money by doing the repair myself.
48 of 63 people found this instruction helpful.
Was this instruction helpful to you?
ANTHONY from STATEN ISLAND, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
WP3390719, WP3387134, 279048
dryer wouldnt heat
All parts were correct is what I should say to begin. Replacing the parts was a bit difficult, but I got the job done. My Kenmore dryer has been serving our needs faithfully for 14 plus years, and hopefully with these new parts, it will last a bit longer, thanks to your service parts. Much appreciated, and keep up the good work!
33 of 665 people found this instruction helpful.
Was this instruction helpful to you?
kevin from Saint Augustine, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
WP3390719
The dryer stopped working and would not start.
After unplugging the dryer, I removed the bottom panel in front. Remove the the filter inside the dryer and remove the filter housing below. There you can see the thermal fuse on the air duct, its white with two blue wires. You can check it with a ohmmeter after removing the wires. If its open its bad. Its held in place with two sheet metal screws. After replacing the thermal fuse the dryer worked fine. However I would suggest cleaning the air duct and the outside discharge opening. Hope this helps.
20 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Brad from Odessa, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
WP3390719
Thermal fuse was bad.
Did an Ohm test on the old Thermal Fuse found it to be bad. Replaced it with a new and the dryer is back to working great. Your suggestions saved approximatley $150.

Thanks for the help.
16 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Dennis from Purcellville, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
Parts Used:
WP3390719, WP3387134
The dryer burner wouldn't fire
Checked online for symptoms.
Pulled panel from front of unit (no tools required)
Vacuumed all lint from unit to see if that was a problem.
Removed the exhaust port which comes off with 3 hex head screws.

Based on the symptoms, I pulled the wires off the thermal fuse and did a continuity check on it. There was no continuity, so I knew I needed that part. Since a common reason for that to fail is the cycling thermostat allows the dryer to get too hot, I replaced that thermostat as well, just to be safe.

Due to closeness to the drum, I had to use a socket to remove the hex head screws on the two electronic parts.

Total time was about 40 mins. to diagnose and 20 mins. to replace the parts and verify correct operation.
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Pam from Chandler, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WP3390719
Dryer would not turn on
We took the screws off of the back, took out the thermal fuse and replaced it with the new one.
We watched a video of how to do it which made it so easy.
Works great!
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
ANN from COON RAPIDS, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
W10807860, WP3390719, 279816
Dryer would tumble but not heat.
Used an inexpensive multi-meter to detect that there was no continuity through thermal cut-off (high end) or disposable thermal fuse. I identified these parts by reading your online schematic of the dryer. I noted that the flexible ducting had been crushed on the dryer which lead to the feasibility that the thermal cut offs, especially the thermal fuse could have burnt out. Ordered the parts on Monday, drying clothes again on Wednesday.
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
John from HATFIELD, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
WP3390719, WP3387134, 661570V
Dryer would not start.
With the help of YouTube, I was able to watch videos of how to disassemble and reassemble the dryer. I watched a video showing where the Thermal fuse and Thermostat was located as well as how to test them with a meter. I watched another video showing how to replace the drum belt, showing step by step instructions. Without YouTube it would have been a whole different story!
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
11 Reviews
4.7
out of 5
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741444
Manufacturer Part Number: WP3390719
Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
10697502820
Dryer - Kenmore Dryer Model 106.97502820 (10697502820, 106 97502820) Parts
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
1106007299
Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096991
Dryer
Kenmore
11060182000
Dryer
Kenmore
11060882990
Dryer
Kenmore
11060884990
Dryer
Kenmore
11060887990
Dryer
Kenmore
1106090199
Dryer - Kenmore Dryer Model 110.6090199 (1106090199, 110 6090199) Parts
Kenmore
11060901990
Dryer
Kenmore
1106090299
Dryer - Kenmore Dryer Model 110.6090299 (1106090299, 110 6090299) Parts
Kenmore
11060902990
Dryer
Kenmore
11060904990
Dryer