Part Location Diagram of WP3389441 Whirlpool Door Catch
See part 24 in the diagram
Replacing your Whirlpool Dryer Door Catch
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Door Catch WP3389441

★★★★★
★★★★★
3 Reviews

Rated by 7 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 9.75
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11741434
Manufacturer Part Number WP3389441
Manufactured by Whirlpool for Whirlpool, Kenmore, Maytag, Roper
Product Description

Door Catch Specifications

This white female door catch is attached to the dryer door.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Dryer Door Catch

Replacing your Whirlpool Dryer Door Catch
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Door Pops Open
This part works with the following products:
Dryer, Washer Dryer Combo.
Part# WP3389441 replaces these:
AP6008299, 3389441
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Door would open during cycle
Used pliers to pull parts off and screwdriver to put back on
Other Parts Used:
STRIKE Door Catch
  • Jenny from TOWANDA, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door was popping open
Watch the video before I received the part. Made it very simple to replace and which screws to take out.
  • Harry from OTSEGO, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic handle use to open the door broke.
Go to you tube to see how easy it is to fit the new handle. . It was a snap!
Other Parts Used:
Door Catch Dryer Door Handle - White
  • Thomas from LITITZ, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic female latch part had broken...door would not stay shut
It was so easy... Pop out the old with flatblade screw driver and insert new piece... Works perfectly and looks better than the velcro strip I was using to hold the door shut...! Thanks for fast delivery and having the part available...

Regards,
JBL
  • JOHN from HENDERSONVILLE, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer door would not latch
my dryer door didn't latch for over a year. We were accustom to proping large objects against it. a friend told me to look on line. The close up pictures and parts diagrams were awesome. It was here in 4 days . Now my family thinks I am a hero. The end
  • Robert from Livermore, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top door catch assembly had broken
It was so easy, that my wife did it the day we got the part before I got home from work. She wedged it out with a flat head screw driver and then pushed the new door catch assembly in with her thumb. Pretty simple, thanks for having parts like this available to the public!
  • tony from prineville, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
29 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing machine stopped 1/2 way through cycle
Online repair tips already listed are pretty accurate, however I did have a little difficulty getting the control panel to lift up. I didn't realize that the two screws recessed at the back of the machine needed to be all the way out before it would move. It doesn't swivel or twist as the previous directions said. you have to shove the entire control panel backwards to slip the hooks out of the slots before you can pick it up and move it out of the way. Once you have that lifted you can get to two brass straps that have to pop out of the top of the machine before the back panel and the front housing can separate. Disconnect the plastic connection to the control switch before you attempt to move the housing. After I got that far it was very easy to replace the old switch with the new one. One screw on the grounding wire and one clip holding it in place along the top of the machine and that's it! Once you get the repair done the operation is done in reverse. The only thing you need to be sure and do is to make sure the notches at the bottom of the machine match up to the slots on the housing otherwise the entire housing is very unstable if you try to move the machine, the fill tube doesn't sit correctly, and the tub isn't in the correct position. In that case take it apart again and try to get the slots and notches matched back up,
Other Parts Used:
Lid Switch Assembly with Leads Door Catch
  • Lea from Guymon, OK
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
January 14, 2022
Door catch pin won't engage far enough into plastic catch to keep door closed
For model number MEDB765FWO
PartSelect logo
Hello Gary, thank you for your question. Based on your model number, we find the part to be the Strike PartSelect Number PS12723934. Or you may need to replace the door catch as well as they work together. We hope to hear from you soon

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Sharon
February 17, 2023
Looking for the part of the dryer door that keeps the door closed
For model number MB2322066
PartSelect logo
Hello Sharon, thank you for your question. We suggest the Door Catch Kit PS334230. This kit contains two door strikes, and three door catches to service dryer doors that have one or two catches. We hope to hear from you soon

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Elmer
December 13, 2021
I need the part on the top right corner on dryer door opening that the door catches on or where the light comes on.
For model number MED5707TQ0
PartSelect logo
Hello Elmer, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11741434. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Maisie
April 28, 2022
Hi, I'm looking for a female door latch for the Kenmore model number listed above. Do you carry this Thanks!
For model number 11086030120
PartSelect logo
Hello Maisie, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS334230 and is only sold as a kit. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741434
Manufacturer Part Number: WP3389441
Brand
Model Number
Description
Kenmore
10688419100
Dryer
Kenmore
10688419300
Dryer
Kenmore
110088732791
Washer Dryer Combo
Kenmore
1101820296
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
1101820299
Washer Dryer Combo - WASHER DRYER LAUNDRY SYSTEM
Kenmore
11060372710
Dryer - Dryer
Kenmore
11060522900
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060712990
Dryer
Kenmore
11060722990
Dryer
Kenmore
11060724990
Dryer
Kenmore
11060727990
Dryer
Kenmore
11060802990
Dryer
Kenmore
11060812990
Dryer
Kenmore
11060814990
Dryer
Kenmore
11060817990
Dryer
Kenmore
11061202010
Dryer
Kenmore
11061202011
Dryer
Kenmore
11061802000
Dryer
Kenmore
11061804000
Dryer
Kenmore
11061812000
Dryer
Kenmore
11061814000
Dryer
Kenmore
11062602100
Dryer
Kenmore
11062602101
Dryer
Kenmore
11062612100
Dryer
Kenmore
11062612101
Dryer
Kenmore
11062622100
Dryer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service