We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leon
January 27, 2020
The door falls open...must be a spring or something that holds it closed? What part do I need to hold the door shut when not washing?
For model number 66517034401
Hi Leon,
Thank you for your question. If the door is not staying closed, there are some parts that you will need to check to see which one is causing the issue. You will need to check the detergent and rinse aid dispenser, the door latch bracket, the hinges, the mounting brackets, the door actuator, the friction sleeve, the strike and the rack track stop. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brian
May 13, 2024
Is the lower door seal part of the inner door panel or can it be replaced separately.
For model number 66516369300
Hi Brian, thank you for reaching out. The lower door seal does not come separately. It comes as a part of the inner door panel, part number PS11741345. If you need help placing an order, customer service is open 7 days a week!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gurnam
October 18, 2023
How to replace leaking inner door panel Part# 11741345 for Kenmore dishwasher. Thanks.
For model number 66516872000
Hello Gurnam, thank you for reaching out. We are providing you with the instructions that will help you in replacing the inner door panel.
1- Unthread the screws securing the inner panel with the outer one.
2- Remove the wire connector and remove the electronic control board.
3- Rotate the vent bezel counter clockwise to detach it from the inner door panel.
4- Bend the dispenser retaining tabs outward so you can remove the dispenser.
5- Now replace it with the new one.
We hope this helps!
