Pin (Lid Hinge) WP3372028 | Official Whirlpool Part | Fast Shipping | PartSelect
Pin (Lid Hinge) – Part Number: WP3372028
( Grid squares measure 1x1 inch )
Pin (Lid Hinge) – Part Number: WP3372028 https://partselectcom.azureedge.net/Schematics/Maytag/QOP7DTSW.gif

Pin (Lid Hinge)

PartSelect Number PS11741308

Manufacturer Part Number WP3372028

Manufactured by Whirlpool

Product Description

Pin (Lid Hinge) Specifications

The lid hinge pin or detergent lid pin on your dishwasher helps dispense your dish detergent when your dishwasher is running. The pin fits with the dispenser lid and allows the lid to pop open and dispense detergent. It is a small, plastic pin that is approximately 3 inches in length. Due to its small size, the pin can be damaged relatively easily, and if your pin is broken or missing, it will need to be replaced. This product is sold individually.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Will not dispense detergent | Door latch failure | Not cleaning dishes properly | Door won’t close

This part works with the following products:

Dishwasher.

This part works with the following brands:

Whirlpool, Kenmore, Roper, Estate, Inglis, Maytag, Crosley, Magic Chef, Amana.

Part # WP3372028 replaces these:

3372028, AP6008175.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Part Videos

Replacing your Whirlpool Dishwasher Pin (Lid Hinge)

Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 10 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
HAROLD from FISHERSVILLE, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP8066018, WP3372028
Worn out spring on detergent release box lid
First, examine very carefully how the old spring relates to the detergent release box lid. Note that the top of the spring has a square-end upside down "U" . This rests on a small ledge on the detergent box. Also note that on either end of the spring is a straight extension of the spring wire. These two "legs" must rest on the inside of the edge of the detergent box. Second, use a flat blade screw driver to pry the LID hinge pin from the mounting "posts. Remove the pin, first noting the position of the spring. Reassemble the spring on the hinge pin in reverse order. Then snap the lid onto the spring using the two mounting "posts". NOTE: I used a very fine needle nose pliers to move the two spring "legs" behind the detergent box edge after I had mounted the lid. Flip the lid down to test if the spring pressure on the lid can be felt. Harold Kitzmann, Fishersville VA
80 of 92 people found this instruction helpful.
Was this instruction helpful to you?
KEVIN from PLAINFIELD, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP8066018, WP3378138, WPW10509257, WP3372028, WP3371710
soap dispenser door/spring broken
removed old parts and re-installed new parts. The spring is a little hard to get to the right point without a jewelers screwdriver, after that everything worked fine.
28 of 52 people found this instruction helpful.
Was this instruction helpful to you?
Jo-Anne from Columbia, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP8066018, WP3372028
the pin was broken
but the pin in and add the pin though the 2 tabs close door on it open it up move the springs backwards to the door
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Jim from Oktaha, OK
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP8268645, WP8066018, WP3378138, WP3378134, WP3372028
soap lid missing
Replacing the pin with the spring is a little tricky, it was hard to hold it. And the little plastic pin breaks real easy too, its hard to get the lid to snap in place without breaking the pin.
7 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Emile from Jamaica, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP8066018, WP3378138, WP3372028
Inserting Lid Spring
Had to be careful positioning the spring without breaking the hinge pin. Requires a certain amount of patience.
6 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Robert from Port Clinton, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WP8066018, WP3378138, WP3372028
Soap Lid Pin Broken
Snap the old lid off, remove the pin & spring & install new Pin & Spring. Very easy. Thanks To Parts Select got the right parts.
4 of 11 people found this instruction helpful.
Was this instruction helpful to you?
ROBERT from MAHWAH, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP8066018, WP3378138, WP3372028
SOAP DISPENSER DOOR DID NOT CLOSE.
WATCHED THE VIDEO FOR 2 MINUTES. REPLACED THE 3 PARTS IN LESS THAN A MINUTE. THANKS FOR THE VIDEOS.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Mandy from GREENWOOD, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
WP3378138, WP3372028
Not dispensing detergent
Followed instructions as the videos on this page show.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
D from Sadieville, KY
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WP8066018, WP3378138, WP3372028
Will not dispense soap
Remove old spring pin, spring, door
Waste of time effort and money didn't change a thing still won't dispense soap to wash dishes
1 person found this instruction helpful.
Was this instruction helpful to you?
dwight from onaka, SD
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
WP3372028
I broke one part trying to install
no tools necessary buy instructions would have brrn helpful
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
1 Review
5
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741308
Manufacturer Part Number: WP3372028
Brand
Model Number
Description
Kenmore
110723120
Dishwasher
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
65715755791
Dishwasher - Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts
Kenmore
66513402K900
Dishwasher
Kenmore
66513402K901
Dishwasher
Kenmore
66513409K900
Dishwasher
Kenmore
66513409K901
Dishwasher
Kenmore
66513442K900
Dishwasher
Kenmore
66513442K901
Dishwasher
Kenmore
66513443K900
Dishwasher
Kenmore
66513443K901
Dishwasher
Kenmore
66513444K900
Dishwasher
Kenmore
66513444K901
Dishwasher
Kenmore
66513449K900
Dishwasher
Kenmore
66513449K901
Dishwasher
Kenmore
66513492K600
Dishwasher
Kenmore
66513499K600
Dishwasher
Kenmore
66513592K600
Dishwasher
Kenmore
66513593K600
Dishwasher
Kenmore
66513594K600
Dishwasher
Kenmore
66513599K600
Dishwasher
Kenmore
66513692K600
Dishwasher
Kenmore
66513699K600
Dishwasher
Kenmore
66514212K900
Dishwasher
Kenmore
66514212K901
Dishwasher