Average Repair Rating: 3.6 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
leaking water
The first thing I did was to investigate. I needed to find where the leak was coming from. It was leaking from just above tne door front panel, directly underneath the control panel buttons. I opened the dishwasher door, and decided to remove the door screen vent. I was covered with some offwhite fiberous, or filter like material. I thou
... Read moreght perhaps the filter had broken down, and I ordered a new screen. When it arrived, and, although I had expected to receive a new filter with the plastic door screen, I didn't. There wasn't one to be ordered. I looked at the screen again. My problem was, that although I had considered that the substance I had thought was a filter, was instead build up of detergent, and other particals. That idea didn't seem to make sense. I didn't think it was possible for that stuff to get to the door screen. I thought, it was too far away from the dispenser and food particles. As it turned out, the buildup was, in fact, the problem. I properly cleaned the door vent, which was then fine, and I put it back into the door. There were no more leaks, that was it, and the problem was solved. As a last note however, unfortunatley, I have to return the new door vent screen that I ordered. I enjoyed solving the problem, and you all helped alot. Let's do it again sometime.
Read less
mary from Fountain Green, UT
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
86 of 97 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
soap dispenser door/spring broken
removed old parts and re-installed new parts. The spring is a little hard to get to the right point without a jewelers screwdriver, after that everything worked fine.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
April 16, 2018
How do you replace this vent in the door?
For model number DU943PWKT0
Hi Peter,
Thank you for your question. To install the new screen, unthread the screws from the inner panel of door and access control panel. Once you have access to the control panel, you will then be able to take the old screen out and install new screen. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
November 22, 2022
Does this screen come with a paper filter? There seemed to be more to the screen I took out of my dishwasher.
For model number DU920QWDQ0
Hello Dave, thank you for reaching out. According to our research, this door vent screen does not come with any paper filter. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chris
September 18, 2023
Dishwasher does not not drain properly all the time, which make water leak from bottom of door. Could it be a drain switch or timer?
For model number 665 17731791
Hello Chris, thank you for getting in touch. We would recommend cleaning the filter and drain hose properly. If it does not resolve the issue, you may need to replace the drain check valve, part number PS382661, to fix the issue. The check valve prevents water from returning to the dishwasher after it has drained. If the valve gets stuck closed, it will prevent the water from draining. We hope this sorts out your problem!
