IGNITER ASSEMBLY WP33002789 | Official Whirlpool Part | Fast Shipping | PartSelect
https://partselectcom.azureedge.net/Schematics/Maytag/59647.gif

IGNITER ASSEMBLY

Product Description

IGNITER ASSEMBLY Specifications

This part ignites the gas within the dryer.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

No heat or not enough heat

This part works with the following products:

Dryer, Washer Dryer Combo.

This part works with the following brands:

Maytag, Samsung, Amana, Inglis.

Part # WP33002789 replaces these:

33002789, 35001100, DC47-00022A.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ted from TOPSHAM, ME
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
WP35001191, WP35001092, WP35001087, WP338906, WP33002789
Heat for 1 minute then no heat
In my case, it was the solenoids. Take off the top be removing two screws on back, then slide the top back and off. Then remove little screws on top that hold the plastic bar with the electronic controls. This very easily will pop up, don’t unplug it, just lay it aside on top of machine. Under this you can see the white metal piece that contains the door. This whole piece comes off with the door in place. Look for four screws across the top, remove em. Then open the door, there are two facing out about 10 inches apart. Remove em. Now slide whole door out (sort of a hinge on the bottom) from the top. After it pops out from the tops, lean it out about 1 foot then pull up hard. It comes off at the bottom. Gently unplug the door, you will see the wire to unplug. I used a small screwdriver to gently pry the plug apart to get it started. After the front panel is removed, you can see the gas valve lower right. On top of the gas valve which is about 5 inches by 5 inches, you will two black cylinders on top of it. Cylinders that are 1.5 inches tall and about 1 inch wide. These are your solenoids. These create an electromagnetic field that opens the gas valve. There is a silver colored piece of metal on top of them holding them in place with two screws on top. Take this cover off the two black solenoids (Black cylinders). Then remove the cylinders after gently unplugging them. Do not just pull on the wires. Use an ohm meter to test the old ones after you slide them up and off what looks like a silver post. There are two metal tabs on one where the plug plugs onto it. Set your ohm meter for 1000 and touch the two metal tabs. Your meter should say there IS a circuit. If your meter says there is no circuit your solenoid is bad. The other solenoid has threee tabs. Hold your solenoid with the metal plugs down and the cylinder is standing upright. Have the three prongs facing you. The prong on the left as you face the solenoid it is your common. Touch this prong and then with the other wire touch the middle prong. You need to see a circuit that is closed, or connected. If there is no circuit your solenoid is bad. Now touch your two testing wires on the two outside prongs. You still need to see a circuit. If no circuit you have bad solenoid. Replace em. The solenoids die slowly over years. Your dryer will start to take longer to dry. This is sign of dying solenoids. To the left of the gas valve you can see the sensors that determine if the air coming out of the dryer is damp or dry. Replace them at the same time. Where you are the burner, on the left of the 5 inch wide tube it is in you will see a sensor, rectangle shape 2 inch by 1 inch. This determines if the lighter is glowing. Replace it at this same time. On top of the burner tube, top right, hard to reach, there is another sensor that shuts it all down if it is over heating. There are two wires plugged into it. Use a MAGNETIC and very short philips head to remove it. Slowly, don’t drop the screws. Pull the whole sensor out while plugged in, then unplug it using a screw driver to help get it started unplugging. When the new sensor goes in, screw it on place first. Do not try to screw the new one in with wires on it. It is not easy, but you can do it. Use a small flash light etc to help see. Once screwed on, plug in your wires. It does not matter which wire goes on which end. So after you replace all your sensors (4 total) and you replaced those two round black solenoids, you can put it all back together.

Do not buy cheap piece of sh-t parts. The cheap ones are made in China with short cuts, low quality metal and ceramics. Cheap. Use authentic Maytag parts, each sensor should be like $30. I replaced all of mine for $180. I now have a brand new unit as far as the electronics are concerned, good for another 10 years.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
1 Review
3
out of 5
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741122
Manufacturer Part Number: WP33002789
Brand
Model Number
Description
Samsung
DV203AGSXAA
Dryer - Samsung Dryer Model DV203AGSXAA Parts
Samsung
DV203AGWXAA
Dryer - Samsung Dryer Model DV203AGWXAA Parts
Samsung
DV206AGSXAA
Dryer - Samsung Dryer Model DV206AGSXAA Parts
Samsung
DV218AGBXAA
Dryer - Samsung Dryer Model DV218AGBXAA Parts
Samsung
DV218AGWXAA
Dryer - Samsung Dryer Model DV218AGWXAA Parts
Samsung
DV219AGBXAA
Dryer - Samsung Dryer Model DV219AGBXAA Parts
Samsung
DV219AGWXAA
Dryer - Samsung Dryer Model DV219AGWXAA Parts
Samsung
DV2C6BGWXAA
Dryer - Samsung Dryer Model DV2C6BGWXAA Parts
Amana
DV306LGW
Dryer
Amana
DV316BGC
Dryer
Amana
DV316BGW
Dryer
Samsung
DV316LGWXAA
Dryer - Samsung Dryer Model DV316LGWXAA Parts
Samsung
DV317AGGXAA
Dryer - Samsung Dryer Model DV317AGGXAA Parts
Samsung
DV317AGWXAA
Dryer - Samsung Dryer Model DV317AGWXAA Parts
Samsung
DV328AGGXAA
Dryer - Samsung Dryer Model DV328AGGXAA Parts
Samsung
DV328AGRXAA
Dryer - Samsung Dryer Model DV328AGRXAA Parts
Samsung
DV328AGWXAA
Dryer - Samsung Dryer Model DV328AGWXAA Parts
Samsung
DV331AGRXAA
Dryer - Samsung Dryer Model DV331AGRXAA Parts
Samsung
DV337AGGXAA
Dryer - Samsung Dryer Model DV337AGGXAA Parts
Samsung
DV337AGLXAA
Dryer - Samsung Dryer Model DV337AGLXAA Parts
Samsung
DV337AGRXAA
Dryer - Samsung Dryer Model DV337AGRXAA Parts
Samsung
DV337AGWXAA
Dryer - Samsung Dryer Model DV337AGWXAA Parts
Samsung
DV338AGBXAA
Dryer - Samsung Dryer Model DV338AGBXAA Parts
Samsung
DV338AGWXAA
Dryer - Samsung Dryer Model DV338AGWXAA Parts
Amana
DV3C6BGW
Dryer
Samsung
DV419AGUXAA
Dryer - Samsung Dryer Model DV419AGUXAA Parts
Samsung
DV419AGWXAA
Dryer - Samsung Dryer Model DV419AGWXAA Parts
Samsung
DV448AGPXAA
Dryer - Samsung Dryer Model DV448AGPXAA Parts
Samsung
DV448AGWXAA
Dryer - Samsung Dryer Model DV448AGWXAA Parts
Samsung
DV511AGWXAA
Dryer - Samsung Dryer Model DV511AGWXAA Parts