Quick Question!

Have you ever purchased from PartSelect.com before?

https://www.partselect.com/Schematics/Maytag/50600.gif
See part 7 in the diagram
https://www.partselect.com/Schematics/Maytag/50600.gif

Timer

Your Price

$111.50
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11741062
Manufacturer Part Number WP33001730
Manufactured by Whirlpool

This timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This part works with the following brands: Maytag, International.

This part works with the following products: Dryer.

This part fixes the following symptoms:

  • Will not shut off.
  • Timer will not advance.
  • No heat or not enough heat.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

Dryer will not turn off at end of cycle. Timer know goes past the stop postion and keeps running. Please recommend the correct timer replacement part. Thanks

Sam for model number Maytag Neptune Dryer MDG4000BWQ
Answer:

Hi Sam, Thank you for your inquiry. If the dryer is not shutting off once a cycle is complete, there are some parts that may fix the issue. You will have to check the internal-bias thermostat, the door switch, the timer, the timer knob, the door catch kit, the m series new style coil kit, the radiant flame sensor, the cycling thermostat and the drum support rollers. I hope this helps. Thank you and have a great day!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 4 reviews What's this?
1-4 of 4
 

13 of 18 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: george from camden, SC

The dryer would not cool down in the permenant press cycle or any other cycle.

Pull the electric plug. With a nut driver and phillips screw driver remove two bolts and three screws on the rear access plate. Gently pull the knob from the front pannel and with the nut driver remove the two bolts under the knob. The timer is now loose from the drver. Match the wire plug codes on the old and new timers. Remove one wire at a time from the old timer with pliers and plug it onto the new timer on the same coded pin. Slide the timer back into the pannel and replace the two bolts that hold it. Replace the knob. Replace the three screws and two bolts holding the back pannel. Plug the electric cord back into the wall socket.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 8 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Richard from Long Valley, NJ

Heater stop working!

Checked all other electrical and mechanical operations and all seemed operational. Removed heating element from unit and checked with vom. It was ok. Reinstalled and began checking wiring with vom per the diagram in the control panel cover. Determined that the contacts for the heater in the timer unit had failed. (Open) temporarily shorted these points on the timer with a strap to make the dryer work. Wife is now happy. Two days later when the timer part arrived, installed and now all is operational. Good for another 10 years. Dick

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mary from Memphis, TN

Dryer would not heat

My husband did the repair - first appliance repair he has done in 37 years of marriage and it was EASY!!!! Ordering was a breeze - part arrived more quickly than appliance repair company could provide it. Saved over $100 ordering from this site and doing ourselves. Directions provided from site were spot on perfect!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 6 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: STANLEY from PLYMOUTH, MA

Would not start at times intermitant on off

called electrian breaker had a slight burn spot on the contact. I was very impressed by your company getting the parts to me so quickly. I'm sorry that I have to return them because the repair would have been much cheaper. Thank you

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741062
Manufacturer Part Number: WP33001730
Brand Model Number Description
InternationalLDE9806ACEDryer - Electric
InternationalLDE9806ACMDryer - Electric
InternationalLDE9806ADEDryer - Electric
MaytagLDG9806AAEDryer - Gas
MaytagLDG9806AAMDryer - Gas
MaytagMDE3000AYADryer - Residential
MaytagMDE3000AYQDryer - Residential
MaytagMDE3000AYWDryer - Residential
MaytagMDE3000AZADryer - Residential
MaytagMDE3000AZQDryer - Residential
MaytagMDE3000AZWDryer - Residential
MaytagMDE4000AYQDryer - Residential
MaytagMDE4000AYWDryer - Residential
MaytagMDE4000AZQDryer - Residential
MaytagMDE4000AZWDryer - Residential
MaytagMDE8000AYQDryer - Residential
MaytagMDE8000AYWDryer - Residential
MaytagMDE8000AZWDryer - Residential
MaytagMDE8500AYWDryer - Residential
MaytagMDE8600AYQDryer - Residential
MaytagMDE8600AYWDryer - Residential
MaytagMDE8600AZWDryer - Residential
MaytagMDE9806AYADryer - Residential, Electric, Gas
MaytagMDE9806AYWDryer - Residential, Electric, Gas
MaytagMDE9806AZWDryer - Residential, Electric, Gas
MaytagMDE9876AYWDryer - Residential
MaytagMDG3000AWADryer - Residential
MaytagMDG3000AWQDryer - Residential
MaytagMDG3000AWWDryer - Residential
MaytagMDG3000AXADryer - Residential