
Infinite Control Switch
$
59.72
In Stock



Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11740785
Manufacturer Part Number WP3149404
Manufactured by
Whirlpool
Product Description
Infinite Control Switch Specifications
This switch controls the stove top 6" surface burner.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Roper, Maytag, Inglis.
Part# WP3149404 replaces these:
AP6007668, 310179, 311847, 311856, 311857, 314144, 3148951, 3149404, W10295576, WP3149404VP
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kee
September 9, 2017
One of the small burners on the ceramic cook top goes to high heat when the control is on low (2-3). Is the temp sensor part of the control switch?
For model number RF368LXPB

Hello Kee, thank you for contacting us. That would be a faulty switch causing the burner to heat up like that on low. Replacing this would fix the issue. Good luck with the repair!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Glenda
May 27, 2019
Front burner(10 inch) only works on high. Is ps1170785 the correct part number and does each burner have a different part number?
For model number WFE525C0BS0

Hello Glenda, thank you for your question. The Right front switch is PartSelect Number PS11740783, and the left front switch is PartSelect Number PS11754687. Each burner uses a different switch. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kerry
December 31, 2017
The left front dual burner goes to high heat when knob is turned to low?
For model number GR440LXMB

Hello Kerry, Thank you for your inquiry. I would test both the burner and the switch with a multimeter to see if they have continuity. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Marsha
November 8, 2019
What does the infinite switch do....how does it work on stove? i have Whirlpool accu bake self cleaning...rf380lxmq0.

Hello Marsha, thank you for your question. The infinite control switch is what controls the heat for the top burner element. You turn the knob to desired setting and this regulates the element heat. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
October 1, 2019
What is part number for infinite switch for left front ? How to know this match my stove? And picture? I took photo of my, and want to compare to avoid buying a wrong one . Thanks
For model number Ygfe461lvs0

Hello Kevin, thank you for your question. The front left, dual element switch for that specific model is PartSelect Number PS11749068. We verify the part is correct by using the model number to find the exact replacement parts list. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
January 15, 2018
I have a 4 burner Whirlpool electric range/oven. The back left burner (vent pipe in the center of the burner) is not working. When i turn the dial, the hot surface light goes on but nothing else happens. I replaced the receptacle but the problem persists. So, when i turn the burner on, power goes to the light but power does not go to the burner. Do i need a new element switch? Something else i should check? Thanks.

Hi John,
Thank you for your question. There are really two main parts that could cause this issue. It could be either your switch or the element itself. I would suggest checking your element first with a multi meter. When testing it remove it from the appliance, it should ready between 1000 - 1100 ohms. When testing your switch make sure to remove it from the appliance and turn the switch on as you are testing it, if your meter does not change at all from the neutral position/number, then it is broken and will need to be replaced. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Terry
July 20, 2017
Do the two little screws come with this switch.
For model number RF302BXYW

Hi Terry, great question. This control switch does not come with the screws, you should be able to use the existing screws to install your new switch. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Andrew
December 1, 2017
I need to replace a switch for the stove small element that its not heating. I found these two and one says its for the 6" and I need it for the small element . Ps11747215 and ps11747215
For model number GR563LXSS

Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11740785. The other options are for the dual element and the large element. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
January 17, 2018
I have a 4 burner Whirlpool electric range/oven rf340bxhw1. The back left burner (vent pipe in the center of the burner) is not working. When i turn the dial, the hot surface light goes on but nothing else happens. I replaced the receptacle and exchanged the element but the problem persists. So, power goes to the light but not to the burner. Can you tell me what part/part number i should replace? Thanks.
For model number RF340BXHW1

Hi John,
Thank you for your question. If your rear surface burner is not working, you will need to replace the switch. The part number for switch is PS11740785. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vic
April 20, 2018
We have a duel control for large and small pots on stove top that only heats to high whether it is set at low or high temperature. I cannot find what to do.
For model number GR673LXSS1

Hello Vic, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: dual surface element, dual infinite switch, and also check the wiring between the element, switch and control board for any visible damage. You can test the parts with a multimeter. If the element and switch test ok, check the control board. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Whirlpool Range Infinite Control Switch
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 5 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The old switch broke off.
Removed two screws that held the unit in then pulled out a few inches so I could see where the 5 wires were. Then I replaced one at a time till done. then replaced the retaining screws.
-
Bruce from Pasadena, MD
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
-
Parts Used:WP3149404
32 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner was not heating up
Puled out the electical plug . Removed the back panel. Pulled off the switch knob. Removed the 2 screws holding the switch. Took the wires off of the old switch and placed them on the corespondig connector on the new switch. Put everything back in reverse order.
-
Gary from Hellertown, PA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Parts Used:WP3149404
27 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out wires and 2 switches.
Unscrewed the switches and let the switch hang while replacing one wire at a time. Followed instructions on wire replacement. Exact parts, only shaft on 6" switch was too long -- okay, because it is designed to break off a piece on end of shaft, then the knob fit. Everything was perfect.
-
Douglas from RAEFORD, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
-
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would randomly overheat on any setting (Bad Control Switch)
1) Unplug stove.
2) Remove back cover of the stove held in place by 8 screws (4 short ones for the upper holes and 4 longer ones for the lower holes.).
3) Remove the knob from the switch that you are replacing to expose
the switch mounting screws (2 screws).
4) Remove the screws.
5) Go to the rear of the stove and extract the defective switch.
6) You will see 2 plastic plugs going into/onto the switch. Remove the
plugs. MAKE SURE YOU ARE UNPLUGGED FROM THE
Wall OUTLET!! A small flat blade may be needed to separate the
plugs from switch.
7) Attach the plugs to the new switch (there is only one way to do it.
you wont get them confused and put on wrong.
8) Put the new switch where the defective one was.
9) Come to the front of the stove and put your two screws in and
replace the knob.
10) Replace the back cover,
11) Plug in and test burner.
2) Remove back cover of the stove held in place by 8 screws (4 short ones for the upper holes and 4 longer ones for the lower holes.).
3) Remove the knob from the switch that you are replacing to expose
the switch mounting screws (2 screws).
4) Remove the screws.
5) Go to the rear of the stove and extract the defective switch.
6) You will see 2 plastic plugs going into/onto the switch. Remove the
plugs. MAKE SURE YOU ARE UNPLUGGED FROM THE
Wall OUTLET!! A small flat blade may be needed to separate the
plugs from switch.
7) Attach the plugs to the new switch (there is only one way to do it.
you wont get them confused and put on wrong.
8) Put the new switch where the defective one was.
9) Come to the front of the stove and put your two screws in and
replace the knob.
10) Replace the back cover,
11) Plug in and test burner.
-
Mark P from CORP CHRISTI, TX
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dual burner would go to highn heat.
Watched video & did just guy in video did. Very easy job & the burner works like new.
-
LOUIS C from GRAND JCT, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
Parts Used:WP3149404
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
RICHARD L - July 22, 2020

Very simple repair, 10 minutes done!
If you have a switch failure, this swap could not be any easier.
John H - November 20, 2019

Wrong Part
Wrong Part
Marc B - June 22, 2019

easy repair
wife now Happy
Cleatus P - April 15, 2019

Over Priced
Same part on another site for 20 Bucks. Plus the switch is too long my tenants have one oven switch that pokes out further than the other one.
C P M - April 2, 2019

Easy
Part works fine. BIG PROBLEM: Delivery time was 7 days not 1.8 or a bit more as advertised. Disappointed in the delivery time. Rating average because of this.
David F - December 13, 2018

Great part. It worked as expected.
It was delivered within a couple of days. Easy to install.
Tiffany S - October 3, 2018

Easy install
So easy and fast to install. Parts arrived quickly and packaged well.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740785
Manufacturer Part Number: WP3149404
Manufacturer Part Number: WP3149404
Brand
Model Number
Description
