Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Maria H - October 30, 2023
Verified Purchase
Doesn’t heat well
The part was easy to replace. I’ve had it on for several months. I have to set the burner on the highest setting just to get enough heat to cook. I did t replace the second burner yet and now I don’t even want to use that second part since this one is not working right.
November 14, 2023
Thank you for your review. I’m sorry to hear that happened, we will be in touch soon to help fix this issue.
★★★★★
★★★★★
Cheryl S - March 3, 2023
Verified Purchase
Easy repair part worked as expected.
Part was received on time in working condition.
★★★★★
★★★★★
Tom P - March 13, 2021
Verified Purchase
quick and simple.
the part was hard to find no one in Corpus Christi had one. Thanks to a wonderful repair man, he recommended PartSelect. They had it and shipped it that day. the repair was quick and simple. Works great ! Thanks
★★★★★
★★★★★
RICHARD L - July 22, 2020
Verified Purchase
Very simple repair, 10 minutes done!
If you have a switch failure, this swap could not be any easier.
★★★★★
★★★★★
John H - November 20, 2019
Verified Purchase
Wrong Part
Wrong Part
★★★★★
★★★★★
Marc B - June 22, 2019
Verified Purchase
easy repair
wife now Happy
★★★★★
★★★★★
Cleatus P - April 15, 2019
Verified Purchase
Over Priced
Same part on another site for 20 Bucks. Plus the switch is too long my tenants have one oven switch that pokes out further than the other one.
★★★★★
★★★★★
C P M - April 2, 2019
Verified Purchase
Easy
Part works fine. BIG PROBLEM: Delivery time was 7 days not 1.8 or a bit more as advertised. Disappointed in the delivery time. Rating average because of this.
★★★★★
★★★★★
David F - December 13, 2018
Verified Purchase
Great part. It worked as expected.
It was delivered within a couple of days. Easy to install.
★★★★★
★★★★★
Tiffany S - October 3, 2018
Verified Purchase
Easy install
So easy and fast to install. Parts arrived quickly and packaged well.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
cooktop on the rt side would just keep getting hot
Removed the ifinite controlswitch and replaced it but i dont believe it is wired correctly. now it wont get hot until it is set on four or so. think i the way it is wired.
Pulled range out from wall, unplugged AC, unplugged infinite switch, plugged in new switch, broke off end of stem, plugged AC in put range back and tested.
Burner would randomly overheat on any setting (Bad Control Switch)
1) Unplug stove. 2) Remove back cover of the stove held in place by 8 screws (4 short ones for the upper holes and 4 longer ones for the lower holes.). 3) Remove the knob from the switch that you are replacing to expose the switch mounting screws (2 screws). 4) Remove the screws. 5) Go to the rear of the stov
... Read moree and extract the defective switch. 6) You will see 2 plastic plugs going into/onto the switch. Remove the plugs. MAKE SURE YOU ARE UNPLUGGED FROM THE Wall OUTLET!! A small flat blade may be needed to separate the plugs from switch. 7) Attach the plugs to the new switch (there is only one way to do it. you wont get them confused and put on wrong. 8) Put the new switch where the defective one was. 9) Come to the front of the stove and put your two screws in and replace the knob. 10) Replace the back cover, 11) Plug in and test burner.
Watched video & did just guy in video did. Very easy job & the burner works like new.
LOUIS C from GRAND JCT, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out wires and 2 switches.
Unscrewed the switches and let the switch hang while replacing one wire at a time. Followed instructions on wire replacement. Exact parts, only shaft on 6" switch was too long -- okay, because it is designed to break off a piece on end of shaft, then the knob fit. Everything was perfect.
Puled out the electical plug . Removed the back panel. Pulled off the switch knob. Removed the 2 screws holding the switch. Took the wires off of the old switch and placed them on the corespondig connector on the new switch. Put everything back in reverse order.
Gary from Hellertown, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
30 of 45 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old switch broke off.
Removed two screws that held the unit in then pulled out a few inches so I could see where the 5 wires were. Then I replaced one at a time till done. then replaced the retaining screws.
Bruce from Pasadena, MD
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
33 of 43 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
43 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kee
September 9, 2017
One of the small burners on the ceramic cook top goes to high heat when the control is on low (2-3). Is the temp sensor part of the control switch?
For model number RF368LXPB
Hello Kee, thank you for contacting us. That would be a faulty switch causing the burner to heat up like that on low. Replacing this would fix the issue. Good luck with the repair!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Glenda
May 27, 2019
Front burner(10 inch) only works on high. Is ps1170785 the correct part number and does each burner have a different part number?
For model number WFE525C0BS0
Hello Glenda, thank you for your question. The Right front switch is PartSelect Number PS11740783, and the left front switch is PartSelect Number PS11754687. Each burner uses a different switch. I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Marsha
November 8, 2019
What does the infinite switch do....how does it work on stove? i have Whirlpool accu bake self cleaning...rf380lxmq0.
Hello Marsha, thank you for your question. The infinite control switch is what controls the heat for the top burner element. You turn the knob to desired setting and this regulates the element heat. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kerry
December 31, 2017
The left front dual burner goes to high heat when knob is turned to low?
For model number GR440LXMB
Hello Kerry, Thank you for your inquiry. I would test both the burner and the switch with a multimeter to see if they have continuity. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
John
January 15, 2018
I have a 4 burner Whirlpool electric range/oven. The back left burner (vent pipe in the center of the burner) is not working. When i turn the dial, the hot surface light goes on but nothing else happens. I replaced the receptacle but the problem persists. So, when i turn the burner on, power goes to the light but power does not go to the burner. Do i need a new element switch? Something else i should check? Thanks.
Hi John,
Thank you for your question. There are really two main parts that could cause this issue. It could be either your switch or the element itself. I would suggest checking your element first with a multi meter. When testing it remove it from the appliance, it should ready between 1000 - 1100 ohms. When testing your switch make sure to remove it from the appliance and turn the switch on as you are testing it, if your meter does not change at all from the neutral position/number, then it is broken and will need to be replaced. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Terry
July 20, 2017
Do the two little screws come with this switch.
For model number RF302BXYW
Hi Terry, great question. This control switch does not come with the screws, you should be able to use the existing screws to install your new switch. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Andrew
December 1, 2017
I need to replace a switch for the stove small element that its not heating. I found these two and one says its for the 6" and I need it for the small element . Ps11747215 and ps11747215
For model number GR563LXSS
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11740785. The other options are for the dual element and the large element. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
October 1, 2019
What is part number for infinite switch for left front ? How to know this match my stove? And picture? I took photo of my, and want to compare to avoid buying a wrong one . Thanks
For model number Ygfe461lvs0
Hello Kevin, thank you for your question. The front left, dual element switch for that specific model is PartSelect Number PS11749068. We verify the part is correct by using the model number to find the exact replacement parts list. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
October 5, 2023
The front right element control seems to not function correctly, either on with no heat below medium, you turn it up to medium and the element gets so hot it burns everything. There does not appear to be a middle setting point.
For model number YWFE515SOEWO
Hi David, thank you for the question. Based on the description you have provided, it seems that there is an issue with the infinite control switch, part number PS11740783. It turns the surface element on and off and controls how much heat the element produces. You may need to replace it to fix the issue. We hope this will resolve your problem!
The left front burner of my dual burner Whirlpool accu bake self cleaning oven does not work properly. Both burners work as they should, but.......neither one will go to a lower temperature when i turn it (big or small) down. does the infinite switch control this?
For model number RF380LXMQ0
Hello Marsha, thank you for your question. yes, the infinite switches control the burners. We would recommend replacing the Left front infinite switch PartSelect Number PS11740783. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
