Maytag/Maytag_Thumb/36065.gif
See part 8 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Multi-Temperature Gas Thermostat

★★★★★
★★★★★
5 Reviews
$ 33.72   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11740685
Manufacturer Part Number WP307250
Manufactured by Whirlpool
Product Description

Multi-Temperature Gas Thermostat Specifications

Also known as cycling thermostat with internal bias heater - L150-25 - 5 terminal.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
No heat or not enough heat | Timer will not advance | Takes too long to dry | Will not shut off
This part works with the following products:
Dryer.
This part works with the following products:
Maytag.
Part# WP307250 replaces these:
307250
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Celeana
    August 31, 2017
    My apologies, i'm not sure if this changes your response; but the timer works during timed /air fluff - just not during auto dry.
    For model number MDG2500BWW
    Hi Celeana, Thank you for getting back to us. If you timer is not advancing I would check the timer, the timer dial skirt, the timer knob, the m series new style coil kit, the thermostat and the radiant flame sensor. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Gary
    February 5, 2018
    The timer works when set to a dry time such as 60 mins etc. The timer advances and shuts off the dryer in this case. However, when it is set on auto dry such as "more dry" or "less dry" it does not shut off or move. Could this be a thermostat issue or a timer issue? Which is more likely? Thank you!
    For model number mdg2600bww
    Hi Gary, Thank you for the question. It is most likely a timer issue. You can verify by testing the thermostat, it should read closed. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Dean
    December 8, 2019
    Timer keeps advancing through cycles will not shut off replaced timer does not do this all the time
    For model number LDG7304AAE
    Hello Dean, thank you for your question. We would recommend testing the thermostats, gas coils, flame sensor and igniter. I hope this helps.

    Was this helpful?
    Thank you for voting!
    Celeana
    August 31, 2017
    The dryer (which is about 10+ years old) is heating up during the auto dry and timed dry/air fluff; however, the timer does not advance when using auto dry. In auto dry mode, the dryer will just continue to run unless manually stopped. The lint trap and filter are both clear/cleaned. Would replacing this part cause the timer to "re-activate" during auto dry?
    For model number MDG2500BWW
    Hi Celeana, Thank you for the question. Looking through the symptoms it sounds like you will need to replace the timer. This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 3.9 / 5.0, 6 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Maytag Dyer stopped heating
        My 20 yr old Maytag dryer had experienced this problem about 10 years ago. At that time I replace the Gas Dyer Radiant Flame sensor and it fixed the problem. I figured a sensor went bad again however I opted to replace all of the sensors at once thinking I'm avoiding potential future issues and the dryer will out live me. Replacing the sensors is a piece of cake on my Maytag. A nutdriver and srewdriver was all that I needed. PartSelect was great to deal with and the parts did the trick.
        • Doug from Walden, NY
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        67 of 93 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The dryer would run continuously when in auto
        I removed the two screws on the front of the dryer and pulled out the bottom of the dryer front until the clips on the top came loose. Next I removed the two screws that hold the thermostat in place and then switched the wires from the old one to the new one. I did them one at a time to ensure that they didn't get mixed up. After that I reinstalled the thermostat and then replaced the front of the dryer. The timer now advances when it is in auto mode.
        • Patrick from Marysville, WA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Pliers
        • Parts Used:
          WP307250
        17 of 17 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        dryer wouldn't dry
        a lady from church couldn't get her dry to dry. older maytag gas dryer. built really good. took off the front panel, tested the different thermostats and found the one that was broken. replaced the igniterwhile I was at it. hooked up the exhaust and fired her up. Make sure all of the lint is vac'ed out of the system. thats what built up and cooked the thermostat.
        • douglas from phillipsburg, NJ
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WP307250, 4391996
        10 of 12 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Dryer was getting really hot in normal drying mode
        This is a gas dryer. I was able to access the thermostat through the small front access panel. Not easy to see but with a short nut driver I could take out the two screws. I was able to pull the thermostat to the front panel hole and switch the wires. Putting it back in was a challange since I had to do it by feel since I could not look and get my arm in at the same time. Suggest anyone that does this put a small piece of paper around the screw to hold it in the driver
        • Green from Germantown, TN
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver
        • Parts Used:
          WP307250
        7 of 9 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        No flame
        Firts replaced a thermostate - did not fix the proble. ( had a glow from the starter but no flame.)

        checked igniter sensor OK (got no resistance) so replaced the two coils that sit on top of the gas burner. With new coils noticed a much brighter glow from the igniter and the gas line opened up to produce a flame

        Dryer has workd successfully for the last 5 loads.

        Able to run dryer with the front removed by holding in the microswitch activated when door is closed.
        • Christopher from Toms River, NJ
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WP307250
        4 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Auto Dry not working (would not advance)
        Once you take off the front panel of the dryer (easy to do by removing the 2 screws in front, pivoting the panel up & lifting off), the thermostat is right there in front and very easy to replace. Once you transfer the wires to the new thermostat (I did it one-by-one), the 2 screws holding the thermostat are easily removed using a nutdriver. Once the new thermostat was installed, the Auto Dry worked again.

        Note: I changed the timer first, which didn't fix the problem. If I were to do it again, I'd replace the thermostat first (it's less expensive), and then change the timer (very easy to do also) if replacing the thermostat doesn't do the trick. But I am ok with changing both the thermostat and timer, since I plan to keep this dryer going as long as I can. This Maytag dryer is very high quality, and has served me well.
        • Steven from SEWELL, NJ
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WP307250
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          5 Reviews
          5.0
          Filter By Rating:
          • 5 Stars
            5
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11740685
              Manufacturer Part Number: WP307250
              Brand
              Model Number
              Description
              Maytag
              BDG7600
              Dryer - Gas
              Maytag
              BDG7800
              Dryer - Gas
              Maytag
              DG4910
              Dryer - Residential
              Maytag
              DG5910
              Dryer - Residential
              Maytag
              DG7500
              Dryer - Residential
              Maytag
              DG7600
              Dryer - Residential
              Maytag
              DG7800
              Dryer - Residential
              Maytag
              DG8200
              Dryer - Residential
              Maytag
              DG8300
              Dryer - Residential
              Maytag
              DG8420
              Dryer - Residential
              Maytag
              DG8500
              Dryer - Residential
              Maytag
              DG8600
              Dryer - Residential
              Maytag
              GDG4910
              Dryer - Residential
              Maytag
              GDG5910
              Dryer - Residential
              Maytag
              GDG7500
              Dryer - Residential
              Maytag
              GDG7600
              Dryer - Residential
              Maytag
              GDG7800
              Dryer - Residential
              Maytag
              GDG8200
              Dryer - Residential
              Maytag
              GDG8300
              Dryer - Residential
              Maytag
              GDG8420
              Dryer - Residential
              Maytag
              GDG8500
              Dryer - Residential
              Maytag
              GDG8600
              Dryer - Residential
              Maytag
              LDE4000ACL
              Dryer - Residential
              Maytag
              LDE4000ACW
              Dryer - Residential
              Maytag
              LDE4000ADL
              Dryer - Residential
              Maytag
              LDE4000ADW
              Dryer - Residential
              Maytag
              LDE7400ACL
              Dryer - Residential
              Maytag
              LDE7400ACW
              Dryer - Residential
              Maytag
              LDE7400ADL
              Dryer - Residential
              Maytag
              LDE7400ADW
              Dryer - Residential

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service