Maytag/Maytag_Thumb/36065.gif
See part 7 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Multi-Temp Cycling Thermostat with Internal Bias Heater

★★★★★
★★★★★
3 Reviews
$52.77   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11740684
Manufacturer Part Number WP307249
Manufactured by Whirlpool
Product Description

Multi-Temp Cycling Thermostat with Internal Bias Heater Specifications

This thermostat controls the internal drying temperature. Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermostat has a limit of 150 degrees Fahrenheit and a differential of 25 degrees. Meaning that with this thermostat, the heating element will cut out at 150 degrees and cycle back on once the internal temperature drops by 25 degrees.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
No heat or not enough heat | Too hot | Will Not Start
This part works with the following products:
Dryer.
This part works with the following products:
Maytag, International.
Part# WP307249 replaces these:
307249
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    William
    August 12, 2019
    My dryer timer only moves on the timed cycle. The two other cycles when used the dryer does not turn off unless you turn it off manually.-william
    For model number DE8200
    Hi William, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. If all of those parts are fine then it may be your timer that is the issue. I hope that helps. Good luck with your repair.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    William
    November 6, 2019
    Dryer heats and runs for a few loads then shuts down and will not restart. Timer ticks, but no start. After 1/2 hour or so the dryer will start and run again continuing to dry for a few more loads. This has happened twice in the last week.
    For model number LDE 8404 ACE
    Hello William and thanks for writing. It sounds like your dryer is overheating. The heating element warms the air before the air enters the dryer drum. If the element is partially shorted out, it may produce heat continuously, even if the dryer has reached the proper temperature. When this happens, the dryer gets too hot and stops and has to cool down before you can restart it again. heating element # PS11740682, We hope this helps. Please contact us at any time

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Tim
    October 30, 2017
    How do i test this part to see if it is actually bad ?
    For model number LDE8404ACE
    Hi Tim, Thank you for your question. You would test each terminal on this part with a multi meter. When testing the part, set your meter to the lowest setting. They should all read as zero. If your meter does not move at all, the part is bad and will need to be replaced. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Tom
    February 3, 2018
    Hi, i just replaced my rollers, belt, idler pulley and glides. The next time we used the dryer, i noticed that i had dislodged some lint and it was not venting properly. After that was cleaned out, it got stuck on the "less dry" setting when using automatic shutoff and would run for hours. Did i burn out my cycling thermostat?
    For model number LDE8414ACE
    Hello Tom, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: door switch kit, cycling thermostat, dryer timer, high limit thermostat, thermal fuse and the heating element. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Keith Cole
    February 27, 2018
    Our dryer is taking way too long to dry clothes i checked all thermo disk for continuity with my meter and all beeped so they were closed.I checked across the cycle themistor white and black terminal and no beep so it is an open is that normal?I was going to order it and the high temp themistor just to be sure.Thanks keith cole
    For model number MDE2600AYW
    Hello Keith, thank you for your question. You would test each terminal on this part with a multi meter. When testing the part, set your meter to the lowest setting. They should all read as zero. If your meter does not move at all, the part is bad and will need to be replaced. Good luck with your repair!

    Was this helpful?
    Thank you for voting!
    James
    December 11, 2019
    Dryer is too hot on all temperature settings, i have replaced the high limit temperature thermostat
    For model number LDE7334ACE
    Hello James, thank you for your question. We would recommend testing the other thermostats and fuses. Any time there is an over heating or under heating issue the problem is most always a thermostat. Those parts are Multi-Temp Cycling Thermostat with Internal Bias Heater PartSelect Number: PS11740684, Thermal Fuse (Limit: 183) PartSelect Number: PS11740678, and Thermal Fuse PartSelect Number: PS11740687. Testing these parts is very easy. Set your multimeter to the R X 1 setting. Take each of your meter's probes and touch one to each terminal. You are testing for continuity, and you should receive a reading of either zero or infinity. At room temperature, testing the thermostat should produce a reading of zero. But if a thermostat is tested when it is heated to its limit, a reading of infinity should be produced. We strongly recommend that you test your thermostat at room temperature. If the test you conduct with your thermostat does not produce these results, then you should replace the component. I hope this helps!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.8 / 5.0, 3 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Dryer over heating...not shutting off or going thru cycles properly.
        Opened front of dryer & watched the heating unit not shutting off. Purchased the proper high limit thermostat. Replaced it and the multi-temp cycling thermostat for good measure. My dryer runs like new with no additional problems. Thanks for making parts so readily available. Thought I was going to have to replace my dryer, but now it's fixed.....Thanks,again.
        Other Parts Used:
        High Limit Thermostat (Limit: 200-30)
        • Charles from Navarre, FL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        19 of 27 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        noisy operation and then no heat
        First I removed the two screws near the bottom of the front panel. Then I removed the front panel by rotating it outwards. Next I removed the front frame section by removing the four screws. The tumbler rests on this frame piece so remove it carefully and it will stay put - no need to take it out. The grinding noise I was hearing was the tumbler (drum) running on the frame - the glides (bearings) were worn out. This had generated piles of metal powder which I vaccumed up. It was easy to locate the reason there was no heat - the thermostat was burned to a crisp. It torched part of the blower seal in the process. The reason the thermostat fails in this manner is the lint duct gets clogged up increasing the duty cycle of the heater which fries the thermostat. I had to strip back the red wire and install a new blade connector but the thermostat just bolts on easy enough. You'll need a rivet gun to replace the glides. Drill out the old rivets and pull them out with some pliers. Easy enough to do and it runs like new! Good luck.
        Other Parts Used:
        Dryer Blower Housing Seal Front Glide Kit
        • Ben from west Boylston, MA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers
        9 of 11 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Heater ran constantly, except in air fluff cycle, thus operating extremely hot
        Removed the frong cover and and internal sheild, removed and replaced thermostatic, wiring as original.
        I had searched several other sites first for thee part, but none of them seemed accurate. Your photo matched the old exactly, giving me the confidence I wanted before ordering.
        • Charles from Mount Storm, WV
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        6 of 11 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          3 Reviews
          5.0
          Filter By Rating:
          • 5 Stars
            3
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11740684
              Manufacturer Part Number: WP307249
              Brand
              Model Number
              Description
              Maytag
              DE4910
              Dryer - Residential
              Maytag
              DE5910
              Dryer - Residential
              Maytag
              DE7500
              Dryer - Residential
              Maytag
              DE7600
              Dryer - Residential
              Maytag
              DE7800
              Dryer - Residential
              Maytag
              DE8200
              Dryer - Residential
              Maytag
              DE8300
              Dryer - Residential
              Maytag
              DE8420
              Dryer - Residential
              Maytag
              DE8500
              Dryer - Residential
              Maytag
              DE8600
              Dryer - Residential
              Maytag
              DG7600
              Dryer - Residential
              Maytag
              GDE4910
              Dryer - Residential
              Maytag
              GDE5910
              Dryer - Residential
              Maytag
              GDE7500
              Dryer - Residential
              Maytag
              GDE7600
              Dryer - Residential
              Maytag
              GDE7800
              Dryer - Residential
              Maytag
              GDE8200
              Dryer - Residential
              Maytag
              GDE8300
              Dryer - Residential
              Maytag
              GDE8420
              Dryer - Residential
              Maytag
              GDE8500
              Dryer - Residential
              Maytag
              GDE8600
              Dryer - Residential
              Maytag
              GDG7600
              Dryer - Residential
              Maytag
              LDE4000ACL
              Dryer - Residential
              Maytag
              LDE4000ACW
              Dryer - Residential
              Maytag
              LDE4000ADL
              Dryer - Residential
              Maytag
              LDE4000ADW
              Dryer - Residential
              Maytag
              LDE4910
              Dryer - Residential
              Maytag
              LDE4910ACL
              Dryer - Residential
              Maytag
              LDE4910ACW
              Dryer - Residential
              Maytag
              LDE4914ACE
              Dryer - Residential

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service