Maytag/Maytag_Thumb/EA08E1157DFDF3A56C8429DE6FE09239DF3979D4.gif
See part 3 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Evaporator Fan Motor

★★★★★
★★★★★
3 Reviews
$163.96   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

 Fits your AQF1613TEW03 Freezer!
 Fits your AQF1613TEW03 Freezer!
PartSelect Number PS11740626
Manufacturer Part Number WP3-60336-001
Manufactured by Whirlpool
Product Description

Evaporator Fan Motor Specifications

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Too warm | Noisy
This part works with the following products:
Freezer, Refrigerator.
This part works with the following products:
Whirlpool, Maytag, Amana, Crosley.
Part# WP3-60336-001 replaces these:
AP6007509, 3-60336-001, 4390914, 68001613
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Jeff
    May 24, 2019
    The fan blades are chewed up and rubbing from the the repair guy who came out. Can the blades just be ordered and put on?
    For model number MQU1556AEW
    Hello Jeff, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11754833. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Jeff
    June 6, 2019
    Little motor which attaches to the fan (i ordered this fan blade several days ago) does not look like the pic on your site. I think the motor is a little electromagnet type. Can you advise and also the price
    For model number MQU1556AEW
    Hello Jeff, thank you for writing. This is listed as the correct replacement for your model. Replacement parts are sometimes updated by the manufacturer and may be different in appearance but will have the same functionality. The price is listed to the left of the 'Add to Cart' button, and the current availability is listed to the right of it.

    Was this helpful?
    Thank you for voting!
    Carl
    February 24, 2018
    You say part for evap cooler is 3-60336-001. My connector is like the one shown but has a third wire going into the middle pin. Is this the right part? How do I put in the center pin in the connector. Is it included? Email me how to install. Thanks how fast can you ship. Overnight?
    For model number EVL209nbtq00
    Hi Carl, Thank you for the question. Looking up this model number, the fan on the appliance would only have a white and a blue wire that go to a connector. The other side of the connector which is part of the main harness would have a second white wire but the wire that runs from the clip to the bottom of the coil is part of the main harness and would not need to be removed. The shipping options as stated int he check out are, Economy Shipping, usually 3-7 business days, for $6.15. FedEx/UPS Ground Shipping, usually 2-3 business days, for $8.49, and Next Business Day for $24.95. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Sheika
    December 30, 2019
    Bought the evap fan kit w10445742 and can not figure out the black cord. It is on old part o see where it needs to go to old part but how do you remove it without tearing it up
    For model number Ev201nxmq05
    Hi Sheika, we do not have much information on this part/model specifically. I recommend watching our video for the general procedure here: https://www.youtube.com/watch?v=Hj_ojPQebcw. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.8 / 5.0, 4 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Froze over fan motor burnt out
        Removed shelves from inside freezer then removed 4 screws holding cover panel. Pulled panel up and slightly pulled forward to remove. Removed wiring connections then removed two screws that held the motor & fan assembly. Removed the support bracket from the old motor and installed same on the support bracket. Reversed removal procedures for installation. Cover panel is a little bit of a problem when trying to reinstall. Put in panel as high as you can and then slide down. You must then exert a little pressure on the bottom portion to get it to seat correctly. Install four remaing screws and you are done. I had this repaired previously by a professional repairman and noticed from the pictures you folks provided that he had installed the screws on the support bracket incorrectly. That was the reason for the fan blade to rip apart.
        • James L. from Madison, AL
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WP3-60336-001, WPW10445742
        64 of 72 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Evaporator fan did not run
        The first thing I observed was the bolts that attach the motor to the mounting bracket were installed backwards at the factory. This caused the fan to catch on the bolt ends which resulted in the motor burning up. When I installed the new motor, I reversed the bolt direction. There is no way the fan will catch. The freezer works great !
        • Murray from Terrebonne, OR
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WP3-60336-001
        28 of 32 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Deep Freezer leaked, warmed up to about 60 degrees, door no longer pulled shut when closing
        You should know that the freezer leaked for months before it warmed up. It's not connected to water (no ice maker in it) so I figured it was ice build-up that was melting and causing the leak.

        When it warmed up I called a repairman who said the start relay was bad and estimated $500 to replace it. I disputed this because the compressor was running. I asked him if perhaps the freon was low, he said if it was, we should dispose of the freezer.

        I even asked him to take $300 to replace that relay, but he refused so I paid him his service fee and sent him on his way. Turns out even $300 would've been a ripoff.

        I watched several videos on diagnosing warm freezers. I tried contacting many online parts stores but PartsSelect.com was the only one that answered and had kind and patient techs willing to explain things to me.

        I tested the evaporator fan motor, which turned out to be bad. The tech recommended other parts that might also be bad so I put them all into the shopping cart, including the overload (by accident, not sure how I got that one as I did not need the overload for this repair). I did buy the relay in case the unethical repair guy was right about the relay being bad.

        The parts arrived quickly and the diagrams/video supplied by this site were very helpful. I used my cell phone to take photos of everything before I started so I could put all wires back in their proper places, etc.

        EVAPORATOR FAN MOTOR:

        Very easy to replace. I removed the cover panel as instructed, and removed the screws holding the motor with my nutdriver. The blades slid off the motor nice and easy--I did not have to fiddle with the clip at all, just slid them off and on.

        There is a third hole in the white bracket that worried me because I didn't see a corresponding third hole in the photo online of that part. But when it arrived, it did have the hole so I was able to plug it in just fine.

        I removed the middle wire from the old part's white bracket NOT by pulling on it. I removed it by gently pushing an allen wrench into the hole and then the wire came out easily so it could be plugged into the new part.

        Very easy overall to replace the Evaporator Fan Motor.

        BI-METAL DEFROST THERMOSTAT:

        Another very easy to replace part! Find the old part, unplug it and plug in the new part! Once the panel is removed to access the fan, you can hold up the new part and use it to find the old one. In this model it was easy to find.

        DEFROST TIMER:

        This was on the back of my freezer, in the cavity that holds the compressor. Once I located it, it was a simple thing to replace it. I used the nut driver to unscrew the screws and unplugged it, plugged in the new one, put the screws back... super simple.

        START RELAY:

        This was the scariest for me but turned out to be simple. I had to lie on the ground to get close enough and position a bright light so I could see everything clearly. (I'm a 60-year-old gal with poor eyesight and creaky bones!) The cell phone came in handy here to take up close photos of the assembly.

        Another difficult step: grabbing the relay to pull it out. It was difficult to gain purchase on it but I finally figured it out.

        A third difficulty (only for me) was pulling off the terminals without damaging the wire. I followed the video closely here, grabbed the terminals and not the wire and worked at them to pull them off. They were on very tight, difficult but I did get them off.

        Installing the new relay was easy. Attach the terminals (cell phone photo of original part helped me ensure I got the right wires to the right place) and plug it in (cell phone helped again so I could line up the pins before pushing).

        The old part rattled just barely -- so perhaps it WAS on its way out, but certainly not worth a $500 repair the repairman wanted! And as you will see, it was not the only thing not working in our this freezer.

        The freezer started right up -- compressor humming nicely -- but after 24 hours it was only 60 degrees. At that point I called PartsSelect.com and they spent a long time with me on the phone. We decided it might be leaking freon but they don't have parts or info on adding freon.

        I researched "how to add freon to your freezer" and found a great video by Vegas Romaniac on youtube.



        Turns out you need to make sure your gauge has a DVA-1 adapter; the link in the youtube video sends you to an old-style gauge, so if you buy that one you'll need to go to Walmart for a DVA-1 adapter ($3).

        Another issue: the green gasket in that gauge prevented it from seating properly, it took me a very long time before it finally seated and pierced the can...
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        No problems
        My brother repaired it but he said it was easy. Freezer works great again. Thanks guys
        • Denise from BULLHEAD CITY, AZ
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WPW10445742, WP3-60336-001
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          3 Reviews
          5.0
          Filter By Rating:
          • 5 Stars
            3
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11740626
              Manufacturer Part Number: WP3-60336-001
              Brand
              Model Number
              Description
              Amana
              AQF1613TEW03
              Freezer - VERTICAL FREEZER
              Amana
              AQF1613TEW04
              Freezer - VERTICAL FREEZER
              Amana
              AQF2013TEW03
              Freezer - VERTICAL FREEZER
              Amana
              AQF2013TEW04
              Freezer - VERTICAL FREEZER
              Whirlpool
              DUF570WDD01
              Freezer
              Whirlpool
              EL7JWKLMQ02
              Refrigerator
              Whirlpool
              EL7JWKLMQ03
              Refrigerator - Convertible/Freezer
              Whirlpool
              EL7JWKLMQ04
              Refrigerator - Convertible/Freezer
              Whirlpool
              EL7JWKLMS02
              Refrigerator
              Whirlpool
              EL7JWKLMS03
              Refrigerator - Convertible/Freezer
              Whirlpool
              EL7JWKLMS04
              Refrigerator - Convertible/Freezer
              Whirlpool
              EL88TRRWQ01
              Refrigerator
              Whirlpool
              EL88TRRWQ02
              Refrigerator
              Whirlpool
              EL88TRRWS01
              Refrigerator
              Whirlpool
              EL88TRRWS02
              Refrigerator
              Whirlpool
              EV160NZTQ00
              Freezer - Upright
              Whirlpool
              EV160NZTQ01
              Freezer
              Whirlpool
              EV161NZRQ00
              Freezer - Upright
              Whirlpool
              EV161NZRQ02
              Freezer - Upright
              Whirlpool
              EV161NZRQ04
              Freezer - Upright
              Whirlpool
              EV161NZRQ05
              Freezer - Upright
              Whirlpool
              EV161NZTQ00
              Freezer - Upright
              Whirlpool
              EV161NZTQ01
              Freezer - Upright
              Whirlpool
              EV165NXTN00
              Refrigerator - Freezer Convertible
              Whirlpool
              EV171NYMQ00
              Freezer - Upright
              Whirlpool
              EV171NYMQ01
              Freezer - Upright
              Whirlpool
              EV171NYMQ02
              Freezer - Upright
              Whirlpool
              EV171NYMQ03
              Freezer - Upright
              Whirlpool
              EV171NYMQ04
              Freezer - Upright
              Whirlpool
              EV171NYMQ05
              Freezer - Upright

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service