Maytag/Maytag_Thumb/WH8VIOZB.gif
See part 29 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Hose Clamp

★★★★★
★★★★★
2 Reviews
$ 6.98   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11740613
Manufacturer Part Number WP285655
Manufactured by Whirlpool
Product Description

Hose Clamp Specifications

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Dishwasher, Washer Dryer Combo, Refrigerator.
This part works with the following products:
Kenmore, Whirlpool, Maytag, Amana.
Part# WP285655 replaces these:
AP6007497, 01500081, 01500148, 01500206, 01500208, 01500214, 0808186, 113200354, 113200366, 14001075, 14001076, 14219080, 14220070, 14224489, 17225, 200461, 200908, 200909, 201011, 20211 ... Show more , 202574, 20391, 204680, 21001875, 21002254, 210597, 211641, 21276, 214875, 22001640, 22001820, 22001984, 22002054, 22002838, 22002853, 22003295, 22003596, 22003897, 22003933, 22004375, 24001438, 25-6068, 25-7080, 25-7797, 25-7881, 27001024, 27001223, 27151, 27153, 272803, 272849, 272851, 272852, 272853, 272854, 272858, 27644, 285655, 287323, 288003, 288004, 288094, 29176, 29439, 326031815, 326038497, 326049294, 33748, 34-0534, 34001315, 34894, 353093, 353097, 35370, 35384, 36802, 370445, 370446, 370447, 370449, 371498, 371500, 40109101, 410297, 4159784, 4160500, 42011233, 42011267, 42048095, 42048116, 42048119, 42048125, 4340211, 4355207, 451200, 451201, 451202, 451203, 451204, 52754, 596592, 596595, 596616, 596727, 61001162, 614.4098, 619584, 65349, 660626, 660628, 712138, 719649, 719650, 719933, 757388, 757442, 80-8186, 808186, 8181753, 8182375, 8182425, 8182768, 8182906, 8317496, 8317946, 8318497, 910068, 9411984, 9414925, 9420906, 965289, 96739, 96991, 98014, A3326001, A3326003, DC65-00009A, M0103004, P113200366, R0000457, R0213577, R0601505, R0601515, R0601516, R0601517, R0601518, R0601519, R0601541, R0601549, R0601551, R9800067, W10112110, W10142630, W10151157, W10156063, W10245724, W10421047, W10527162, W10736530, W11375994, WP22001984, Y01500081, Y01500148, Y01500206, Y01500208, Y01500214, Y0808186, Y22001820, Y6144098, Y757388 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Merrill
    January 8, 2018
    How do i remove the cabinet on this model of Maytag washer? I have a leak and i can't get the cabinet off to determine where the leak is coming from. It might be something as simple as a hose clamp, but i'm not smart enough to determine how to remove the cabinet. Any and all help will be greatly appreciated. Thanks for your time.
    For model number mvwb835dw1
    Hi Merrill, Thank you for your question. There is a video on our website that you can reference on how to remove the cabinet. The washing machine in the video may not show exactly like the one you have and the part being installed is the clutch assembly, but it will show you how to remove the cabinet. You will find the video under part number PS334641. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Charles
    October 24, 2019
    Have a leak clean all the water up on floor, is dry wash cloth now don't see no water floor is dry
    For model number wtw8240ywo
    Hi Charles, we cannot be 100 percent certain what is causing the issue. The hose clamp part WP596669 is our best guess as to what would fix your problem. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Kenmore Washer Hose Clamp

      Customer Repair Stories
       Average Repair Rating: 2.4 / 5.0, 3 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Drive Pump Leaked
        It took some trial and error but overall not a difficult project. 1. Take the front covers off. 2. Undo the pully spring to loosen belt 3. Remove belt off idler pulley wheel and free up belt from the large wheel. 4. Disconect the wiring harness and the hoses. 5. Undo the motor mounting bolts (4) 6. Take motor out of washer and remove the 3 screws holding the pump to the motor. 7. The pump had melted to the shaft and required I chisel the pump off of the shaft. 8. Attach new pump paying attention to where the belt is positioned. 9. Reattach the motor bolts, hoses, and wiring harnes. 10. Attach the belt and test the pump. 11. Put the front back on.
        • Stephen from Laveen, AZ
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers, Socket set, Wrench set
        72 of 88 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Water leak noted on floor at front of washer and at sides
        Occasional noted leak became worse and I had a repair service out. Incorrect detection of outer tub seal made so cancelled them and read comments about raising the top. Did so just at start of a rinse cycle to see soapy water shoot from top of syphon break then continue to dribble out through tub empty process--this is what had cause the water to flow down the interior drain hose and out through the side and bottom near the pump.

        Ordered all the parts shown here and they arrived just in time for planned work. Did not need or use the clamp and gasket purchased as the gasket was included in the break package and I really like the old-style clamps much better.

        Replaced the break and the elbow and put it back together. Things went south on a rinse as water shot out the back hose at the new elbow. I had not realized the size of the new elbow was smaller than the original. Went back to the old elbow but it bothered me that it would still move when the 4 assembly bolt-screws were completely tight.

        So far this seems to have worked. There does not seem to be any leaking at all. For those who read this, the job could be done in about and hour for less than I spent if you observe and diagnose properly. It appears that the washer at the end of the Syphon Break wore out and that is what caused the leak.

        Thanks much to PartSelect for being in business and to all the posters on this site for helping everyone to get these things done right!
        • Jeff from Moorpark, CA
        • Difficulty Level:
          Difficult
        • Total Repair Time:
          More than 2 hours
        • Tools:
          Screw drivers, Socket set
        • Parts Used:
          208847, WP285655, WP214765, 206638
        55 of 63 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Cracked hose AGAIN!
        Hired someone. Note: I purchased two (2) hoses and (2) clamps -- this is the third time I am replacing a cracked hose. The manufacturer needs to use better quality and more flexible material for hoses.
        • BLANCHE from OSSINING, NY
        • Difficulty Level:
          Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
        • Parts Used:
          WP21001872, WP285655
        5 of 15 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          2 Reviews
          3.0
          Filter By Rating:
          • 5 Stars
            1
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            1
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11740613
              Manufacturer Part Number: WP285655
              Brand
              Model Number
              Description
              Kenmore
              101963580
              Washer - Kenmore Washing Machine Model 101.963580 (101963580, 101 963580) Parts
              Kenmore
              101963581
              Washer - Kenmore Washing Machine Model 101.963581 (101963581, 101 963581) Parts
              Kenmore
              101963582
              Washer - Kenmore Washing Machine Model 101.963582 (101963582, 101 963582) Parts
              Kenmore
              10682872600
              Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
              Kenmore
              110088732791
              Washer Dryer Combo
              Kenmore
              11010202000
              Washer
              Kenmore
              11010202001
              Washer
              Kenmore
              1101050299
              Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
              Kenmore
              11010502990
              Washer
              Kenmore
              11010502991
              Washer
              Kenmore
              11010852990
              Washer
              Kenmore
              11010852991
              Washer
              Kenmore
              11012202100
              Washer
              Kenmore
              11012502100
              Washer
              Kenmore
              11012852100
              Washer
              Kenmore
              11013202200
              Washer
              Kenmore
              11013212200
              Washer
              Kenmore
              11014102300
              Washer
              Kenmore
              11014112300
              Washer
              Kenmore
              11014202300
              Washer
              Kenmore
              11014212200
              Washer
              Kenmore
              11014222300
              Washer
              Kenmore
              11014502300
              Washer
              Kenmore
              11014852300
              Washer
              Kenmore
              11015732400
              Washer
              Kenmore
              11015842400
              Washer - Kenmore Washing Machine
              Kenmore
              11015852400
              Washer
              Kenmore
              11015862400
              Washer
              Kenmore
              11015864400
              Washer
              Kenmore
              11015942400
              Washer

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service