11740499-1-M-Whirlpool-WP240210-2-Shaft & Pinion (10T)
Part Location Diagram of WP240210-2 Whirlpool Shaft & Pinion (10T)
See part 17 in the diagram
11740499-1-S-Whirlpool-WP240210-2-Shaft & Pinion (10T) 360 view
( Grid squares measure 1x1 inch )
11740499-1-S-Whirlpool-WP240210-2-Shaft & Pinion (10T) 11740499-2-S-Whirlpool-WP240210-2-Shaft & Pinion (10T) 11740499-1-S-Whirlpool-WP240210-2-Shaft & Pinion (10T) 360 view
Part Location Diagram of WP240210-2 Whirlpool Shaft & Pinion (10T)
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Shaft & Pinion (10T) WP240210-2

★★★★★
★★★★★
1 Review

Rated by 3 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 14.30
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11740499
Manufacturer Part Number WP240210-2
Manufactured by Whirlpool
Product Description

Shaft & Pinion (10T) Specifications

Used with stand mixers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP240210-2 replaces these:
240210-2, 4159644, 4159722, 4162036, 4162037, 4176131
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ron B - January 1, 2019
  Verified Purchase
Fit perfectly
As expected the part fit perfectly and the blender works like new again.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.9 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Gear-worm teeth stripped, teeth on pinion shaft worn to sharp edge and case gasket dried out. Not bad for a 20 yr. old mixer.
Looked at the mixer schematic form your website,which made it easy for me to take it apart. Once it was apart & all the grease removed I disassembled & cleaned all the drive parts. Saw what was warn, ordered the parts from you. Three days later received the parts, everything fit perfect. Added grease,assembled the mixer and it ran perfect, good for another 20 yrs. Thank you for making it so easy to repair an old mixer in just over two hours. Rolf
Read less
Other Parts Used:
Washer Worm Gear Transmission Case Gasket Shaft & Pinion (10T)
  • Margaret from DEXTER, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
pinion teeth sheared off the shaft
Repair went well after I figured out how to dis-assemble the mixer. Used straight & phillips screwdrivers and a small hammer & punch to drive out 3 pins. Ordered part# PS734233 pinion & shaft as shown in the parts page, it arrived on schedule, received part # 240210-2. Only problem was the new pinion had 10 teeth, the old/failed pinion had 11 teeth. Could not learn from anyone I called at PartsSelect or Whirlpool if the 10 tooth pinion was the correct part to use.
The teeth appeared to mesh with the mating gear,
installed the new pinion, reassembled and it worked fine. Not sure if it made a noticable difference in the output shaft speed.
Read less
  • Ray from Roanoke, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pinion gear failed, broken tooth mixer stalled and mixers wouldn't turn.
Went to partselect, found model number, printed blow-up of mixer. Figured out disassenbly procedure. Drove out main pin removing mixer head from stand. Save pin. Drove out pin in mixer main shaft which allowed planetary head to be removed. Save pin.
Removed stainless steel bezel to expose screws for removal of bottom half of mixer body. Removed screws and carefully separated mixer halves using two screwdrivers as prybars. Care must be exercised to prevent chipping of paint on body.
Separated body. cleaned grease from gears to find actual problem. Removed broken geartooth and grease near broken part to make sure no small broken chips remained. Removed pinion shaft assembly, drove pin from gear releasing broken pinion/shaft. Save pin/
Cleaned grease from pinion shaft assembly using mineral spirits and a small brush to reveal how part could be disassembled. Ordered part immediately on-line. Part arrived 1 business day after it was ordered.
Reversed process for replacing pinion shaft. Applied fresh grease obtained from excess already in mixer, spun pinion shaft to make sure grease was properly distributed. Reinstalled pinion shaft assembly. CAREFULLY plugged in mixer and jogged motor to make sure all was free and that mixer worked. If you can repair this mixer, you should have enough sense to do this diagonistic. Keep fingers away from all moving parts, don't touch expposed electric wires. Plug in only after making sure switch is in off position. Jog using mixer switch. Make sure mechanism is free.
Complete re-assembly by following blow-up and reversing disassembly steps. It may be good to write down you disassemblly procedure if it is possible that you won't be reassembling within a day or two.
Read less
  • Michael from Palos Park, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Retaining Pin
$9.03
$9.03
  In Stock
Worm Gear
$20.99
$20.99
  In Stock
GEAR-HUB
$37.79
$37.79
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740499
Manufacturer Part Number: WP240210-2
Brand
Model Number
Description
KitchenAid
3K45SS
Mixer
KitchenAid
3K5SS
Mixer
Whirlpool
3KSM150PSTAQ0
Mixer
KitchenAid
3KSM150PSTBW0
Mixer - MIXER
KitchenAid
3KSM150PSTCB0
Mixer - MIXER
KitchenAid
3KSM150PSTCL0
Mixer - MIXER
KitchenAid
3KSM150PSTCU0
Mixer - MIXER
Whirlpool
3KSM150PSTDR0
Mixer
KitchenAid
3KSM150PSTDR5
Mixer - Model # 3ksm150pstdr5 Official Kitchenaid Stand Mixer
KitchenAid
3KSM150PSTER0
Mixer - MIXER
KitchenAid
3KSM150PSTER5
Mixer - Model # 3ksm150pster5 Official Kitchenaid Stand Mixer
KitchenAid
3KSM150PSTGA0
Mixer - MIXER
Whirlpool
3KSM150PSTIC0
KitchenAid
3KSM150PSTIC5
Mixer - Model # 3ksm150pstic5 Official Kitchenaid Stand Mixer
Whirlpool
3KSM150PSTLR0
Mixer
KitchenAid
3KSM150PSTMY0
Mixer - MIXER
KitchenAid
3KSM150PSTOB0
Mixer - MIXER
KitchenAid
3KSM150PSTPA5
Mixer - Model # 3ksm150pstpa5 Official Kitchenaid Stand Mixer
Whirlpool
3KSM150PSTPK0
KitchenAid
3KSM150PSTTG0
Mixer - MIXER
KitchenAid
3KSM150PSTWH0
Mixer - MIXER
Whirlpool
3KSM150PSTWM0
Mixer
KitchenAid
3KSM5CBTER0
Mixer - MIXER
KitchenAid
3KSM5CBTWH0
Mixer - MIXER
Whirlpool
3KSM95TCZ0
Mixer
Whirlpool
3KSM95TWH0
KitchenAid
4K45SS
Mixer
KitchenAid
4K45SS7OB0
Mixer
KitchenAid
4K45SS7WH0
Mixer
KitchenAid
4K45SSDWH-1
Mixer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Shaft & Pinion (10T)
$ 14.30
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.