Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fred L - September 28, 2019
Verified Purchase
Easy Peasy repar with the right part
I watched carefully a year ago when a service man charged me for fixing an ice ejection problem once before at a cost of about $160. So when I attempted the same fix, I found the bar worn down (rounded off) at the driver motor end. Removed two screws for access, pulled it out, installed replacement and put it back together.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
August 23, 2017
How do you get to the ice dispenser arm and motor (under ice bucket) - there is a plastic mold that seems to be wedged in but i cannot seem to remove it? My ice dispenser arm will not turn - motor is running but arm free spins. Regards, scott
For model number KSSC48QVS02
Hi Scott,
Thank you for your inquiry. First remove the door bins to give yourself some room. There are two 1/4 inch screws underneath where your ice maker is sitting. Just above the bin. They are holding in a panel on the underside of that mold you are looking at. You will reveal the motor this way. Remove the motor carefully. The ejector arm will come out with the motor. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Joe
November 5, 2017
The ice bin is not fitting properly on the door and is not dispensing ice. Should a new shaft fix the problem?
For model number KSSC48QTS03
Hi Joe, Thank you for the question. The only way to know for sure would be taking a look at the bin or dissembling the bin to see if there is a damaged part or something that came out of place.You can check the Ice Ejector Bar,Ice Auger and the blades. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.