removed the drive shaft (6 sided) with seals and replaced it. They last for about 5 years and have to be rotated (flipped over) to continue to use. The shaft metal is a little softer than the drive socket on the motor which, over time will cause the six-sided (12 inch) shaft to round the edges due to torque and pressure on the mixing sh
... Read moreaft inside the ice bucket the the door of the freezer.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jules Ferland
April 15, 2019
To replace pieces no 30 do i need a professional to do that or give me ideas how to do it please step by step thanks
For model number Ksrv22fvss03
Hello Jules, thank you for your question. To replace this part, first unplug the fridge. Open the freezer door, and take the ice bucket off and set it aside. Next, take the hold out and use a 1/4 inch socket and ratchet to take out the screws. Once you have both screws out you can lift the holder out and you should be able to view the sleeve. Use piers to lift the shaft up and out of the unit. If it doesn't come up easily, you may have to jiggle it back and forth to break it free. Once the shaft is up, remove the seal and set it aside. You can remove the drive shaft completely. Once the drive shaft all the way out the sleeve would be removed. If is is stuck on with rust you may need to use some penetrating oil on it and work or tap it off. Once the old sleeve is off you can replace it with the new one and reassembly by following the previous steps! I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jules
April 15, 2019
Nothing tell me it’s the shaft or the motor how i can check that and how i check if the motor is good???
For model number KSRV22FVSS03
Hello Jules, Thank you for the question. If the shaft needs to be replaced you should be able to see wear or damage. The motor might make a grinding noise or not run when defective. You can also test with a multi meter to see if there is continuity. If you can submit a question with the symptoms your appliance is having we can look into the is for you and help you trouble shoot. Looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Tom
February 20, 2019
The ice will not dispense. The motor is running but the blades and spindle aren,t turning. What parts do i need to repair?
For model number KSRY25CVMS01
Hello Tom, Thank you for contacting us. I suggest checking the following two parts: PS869316 Ice Maker Assembly - 8 Cube and PS11723180 Ice Door Kit. Good luck with your repair!
Was this helpful?
Thank you for voting!
Jagdeep
October 18, 2019
I am looking for a coupling between the ice bucket and the motor shaft which connects motor to the bottom of ice bucket .
For model number JS42SEDUDW13
Hello Jagdeep, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11740363. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
