Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Manuel
August 15, 2017
Is this compatible with my model number?
For model number 10656533400
Hi Manuel,
Thank you for your inquiry. Yes, this part is compatible with your model number. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jean
March 13, 2019
Ps968755, is this compatible with my model#? Thanks
For model number 10657902700
Hello Jean, thank you for your question. No it is not. The correct Auger Motor for your model is part PS11723176.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
August 27, 2019
I have lost the shaft from the ice auger motor to the gear that turns the ice dispenser. It looks like a 2inch shaft but i cant find one for the Whirlpool gold fridge. Any suggestions
For model number GSF26C5EXY00
Hi Charles, thank you for your question. I have listed that part below for you. Good luck with your repair.
Can this motor replace an ice auger motor with number: 2198592? It is approximately from 2006.
For model number 2198592
Hello Kristoffer, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Roland
November 28, 2022
Ice dispenser run a few second and stop, if I let it set for a little while then it starts and does the same, the switch is good
For model number ED5FHAXSQOO
Hello Roland, thank you for contacting us. We would recommend checking the cycling thermostat, part number PS11743313, the ice maker control, part number PS2341896, and the ice door kit, part number PS11723180. Please reach out to customer service if you need help placing an order. Glad to be of help!
is this auger motor WP2212363 compatible with this whirlpool refrigerator
ED5FHAXVS00. ?? thx
For model number ED5FHAXVS00
Hello Rick, thank you for your question. According to our research, the auger motor, part number PS11723175, is compatible with the model of your refrigerator. We hope this helps!
Will this new Whirlpool part replace original wp22188868
For model number wp2212363
Hello David and thank you for writing.
It replaces wp2188868, not wp22188868. We would be happy to do some more research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Justin
July 28, 2021
Does this replace part for my Whirlpool French door fridge of model w10749398?
Hello Justin, Thank you for the question. Sadly, we do not have any information on the model number you provided as it is coming up invalid. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. We hope this helps.
Was this helpful?
Thank you for voting!
Peter
September 16, 2021
Will this motor replace wp2326873? The part for my side by side Kenmore elite from 2010.
For model number Kenmore Elite
Hi Peter,
Thank you for your question. Before we can verify if this ice auger motor is used for your refrigerator, we would need the model number from it. Here is a link from our website that you may reference on where to locate the model number, https://www.partselect.com/Find-Your-Refrigerator-Model-Number.aspx. If you could resubmit your question with this information, we would be happy to help you. If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Gustavo
October 13, 2022
Is this compatible with the Kitchenaid KSSC48QTS02 Model?
Thanks
For model number KSSC48QTS02
Hello Gustavo, thank you for your question. The motor you mentioned is not compatible with your model. The auger motor, part number PS11723176, will fit your model. If you have any follow-up queries, please feel free to reach out to customer service. We are available seven days a week. Glad to be of help!
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Auger motor shorted out when lost power during hurricane
Old motor easily removed with nut driver and by disconnecting power connector. New motor is similar, but has very different mounting. Old motor attaches directly to mounting bracket with 4 screws. New motor has holes in very different place on the motor, about 2" lower. Solution is 4 2 1/2" #10 machine screws and 12 nuts. One nut to attach screw firmly to mounting bracket. Other 2 nuts on either side of motor bracket to secure it to mounting bracket screw.. Essentially instead of attaching directly to the mounting bracket, the motor is suspended by the machine screws.
Robert from BOCA RATON, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice dispenser would not work
First I removed the plate inside the freezer to get to motor, then unplugged the wiring harness to the motor and removed the motor. inserted new motor, plugged in harness,replaced the plate, and now that baby spits out ice again!
Tom from Indianapolis, IN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
8 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
could not dispense ice from door
no ice came out from the door dispenser after researching here i found it to be the auger drive motor for the ice dispenser cost $50.00 but was well worth it took less than 15 minutes to replace and was super easy to do. saved on service calls and repairman cg's. directions on how to were also found here and very helpful. i highly reccomend this site if you are a little mechanically inclined you can fix and save big!!!!!!!!!
First I removed the 2 screws holding the cover on. I then disconnected the wires harness before removing the 4 screws holding the motor in place. I reversed these three steps and wala, the ice dispenser now works perfectly. Thanks
James from St Francisville, LA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
7 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice dispenser/crusher not working
removed first wire rack in freezer door this will give you access to the 2 screws for cover to get to motor for ice dispenser/ crusher then removed wire connector to motor. you have to pull back on tab for locking connector to release from terminals. next used nut driver to remove 4 screws holding motor to shaft , installed motor lining up keyed shaft. reinstalled 4 mounting screws for motor. reinstalled 2 screws for access cover and then reinstalled wire rack into freezer door squeezing together to get it back into holes where it pivots
MARK from Lawrenceburg, IN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
8 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not despense ice
Removed two screws on inspection plate underneath second shelf on inside of the freezer door. Removed four screws holding motor that turns inside ice bin. Unplugged wires and reinstalled.
Loren from Placerville, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
6 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice machine motor quit
Ice machine would not turn, dispense, or crush. Made ice fine. First, replaced switch for $7, did not fix it. Second, replaced motor for $80. Old motor was metal, new motor is plastic, but replaced it in 20 minutes, works like a champ. Inside freezer door, took off shelf under the ice maker, unplugged frig, removed two screws and cover plate, removed four screws on motor bracket, unplugged motor, plugged in new motor, replaced bracket and 4 screws, replaced cover, plugged frig in...Perfect!
Rod from Paulden, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
26 of 32 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice dispenser would stop and make noise. Determined to be stripped gears in motor
With the exploded (Printable) view of the assembly for my fridge available on this site, it was a breeze removing the existing ice dispenser motor and replacing with the new one. Ice dispenser work like new, now. I have never had a bad experience from Parts Select.
William from Las Vegas, NV
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
15 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
1
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Walter E - June 5, 2022
Verified Purchase
Easy install
The part was easy to install, loved the fast delivery and saved money because I was able to install it myself.
★★★★★
★★★★★
DANESH T - October 26, 2020
Verified Purchase
Right part, easy install
I hired a local service repair company at first. They came, hardly even checked and said they can't fix the refrigerator???
Next day I called part select. They shipped the part in 2 days, I installed it!!!
Great company.
★★★★★
★★★★★
Valerie H - January 29, 2020
Verified Purchase
Ice auger/motor
Sent the wrong item number first time and product had already been used by someone else.Then when I called for a new one because it was wrong motor,sent us a new one but was the same motor they the first time.which was not the correct motor had to modify bolts ourselves. Never came with any hardware. Not very good experience.
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739700
Manufacturer Part Number: WP2212363
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
