
Refrigerator Dispenser Overflow Grille
$29.13
In Stock



Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11739623
Manufacturer Part Number WP2206670B
Manufactured by
Whirlpool
Product Description
Refrigerator Dispenser Overflow Grille Specifications
This grille is located on the bottom of the ice/water dispenser to catch the overflow. (Black)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Maytag.
Part# WP2206670B replaces these:
AP6006547, 2206670B, W10171993, W10189532, W10323446, WP2206670BVP
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Debbie
October 4, 2019
Does it only come in black>?
For model number 106.57022602

Hello Debbie, Thank you for the question. The White Grille is PartSelect Number PS11739625 and the Bisque is PartSelect Number PS11739624. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Jagrit
August 12, 2019
I removed the grille, and i could see a small puddle of water under it, which keeps dripping whenever i open the door, on drying it up with a cloth, the problem resolved. Is the puddle of the water normal?
For model number PLHS67EGSB1

Hi Jagrit, thank you for your question. You do get draining below your appliance. However if you are getting leaking inside of your appliance it might actually be a temperature issue. When you are having temperature problems in your fridge, there are a few parts that could cause the issue. You can use a multi meter to test most of the parts. Make sure you cut power to your appliance before doing any repairs or tests. First you should test your defrost thermostat. Place the thermostat in ice cold water for 2-3 minutes after removing it from your appliance. It should be reading 0 ohms to be working correctly. Another part to check would be your defrost heater. Remove it from the appliance. It should be reading anywhere between 0 - 50 ohms to be working. You could check your temperature sensor. To find the correct reading for this part you will have to refer to your tech sheet that comes with your appliance. You can usually find this tech sheet behind the bottom grille of your fridge on either the right or left side. These are the most common parts that cause this issue in your appliance. So it is suggested you check them first. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
SAM
July 23, 2017
The water from the fridge is coming out warm! What should i do to fix the problem? Thanks!
For model number ED5PHEXMQ00

Hi Sam,
Thank you for your question. There are a number of parts that could cause your refrigerator to be too warm. You should check your Defrost Thermostat, Thermostat Control, and your Evaporator Fan Motor. You can test all three of these parts with a multi-meter. If you find that all of those parts are in working order, it might actually be your Defrost Control Board that is the issue.
I hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Suzanne
February 19, 2019
Overflow grille in white
For model number Gd5phaxlq00

Hello Suzanne, I have researched the model you have provided and have found the part you are looking for is PS11739625. Have a great day!
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Whirlpool Refrigerator Refrigerator Dispenser Overflow Grille
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 6 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Kitchenaid refrigerator shelf frames were cracking, needed replacement
I had to purchase two shelves and adjustable brackets - though I only needed the slidign glass shelves . Customjer service rep was helpful and pleasant, though the replacements shelves did not bear the Kitchenaid Logo or frosted scheme on glass shelves (I requested and was informed that the replacement shelves would match my Superbra) - Otherwise, parts, when available, were shipped and arrived in well packaged boxes and not damaged. Parts were cheaper than Kitchenaid, though I would call Kitchenaid first to inquire about matching parts prior to ordering from partselect, if that matters to the buyer...Matching shelves may not in fact be available from manufacturer due to age of appliance.
-
Raymond from Coconut Creek, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
44 of 57 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water mineral deposits on dispenser over-flow tray
Snap out - snap in.
-
Mark from Reno, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:WP2206670B
32 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crisper drawer was broken. Other parts were stained due to hard water.
All the parts were easy to find on the website and they arrived within a few days.
Only needed a screw driver to remove the old water arm dispenser and to install the new one.
The drawer, the ice guide and the grille/tray all snapped in place.
Only needed a screw driver to remove the old water arm dispenser and to install the new one.
The drawer, the ice guide and the grille/tray all snapped in place.
-
James from El Paso, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
11 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had no grille.
I put the new grille in place.
Time: Two seconds.
LOL
Time: Two seconds.
LOL
-
Cynthia from Vero Beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:WP2206670B
5 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced old drip grille - cosmetic reasons
pop out old- insert new
-
SUSAN from JACKSONVILLE, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:WP2206670B
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace ice maker
Replace was very easy. Just undid three small bolts from freezer and old unit came straight away. Disconnected wiring, and just reversed the process with the new unit. After about four hours, the unit kicked in and started making ice. The only difficult part was reaching into the freezer as space was limited in this model (side by side freezer/fridge doors).
-
Andrew from ROCKY POINT, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
-
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Nickole B - Today

Refrigerator Dispenser Overflow Grille
This part fit my Kenmore refrigerator perfectly.
DEBORA R - February 12, 2021

Easy fix for my problem.
The person that I talked to knew exactly what I needed and was very helpful. The old dispenser drip tray had turn white with the calcium from our. I could no longer clean all the buildup and it always looked dirty. The new one looks great and I notice it every time I walk by. Thank you, PartSelect.
David C - August 23, 2020

Easy fix. Random part needed replacing. Found it!
Thank you
Mary H - May 6, 2020

Great part. Fast shipping.
The replacement part was perfect, easy to install, and was shipped quickly!
David Robert L - December 31, 2019

Snapped right into place.
After 9 years part became discolored from drying water. Perfect replacement, easy to identify. Thanks!
Daniel K - June 12, 2019

Water tray fits perfectly
What was nice, it came in about 3 days and it was the right part
Jean H - November 11, 2018

Simple process, quality part!
We have very hard water and our tray looked awful. Part came quickly and really looks great!
Grace U - August 21, 2018

Worked as expected ??
The part arrived in great condition
Jay N - July 19, 2018

Fits perfect.
Timely shipping and receiving and the part ordered fits perfectly!
Carmen O - July 19, 2018

Excellent fit for my refrigerator
It was great to replace this part. It fit perfect and didn't take alot of time to get shipped.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739623
Manufacturer Part Number: WP2206670B
Manufacturer Part Number: WP2206670B
Brand
Model Number
Description
