Part Location Diagram of WP22003275 Whirlpool Inner Door - white
See part 004 in the diagram
Replacing your Maytag Washer Inner Door - white
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Inner Door - white WP22003275

★★★★★
★★★★★
8 Reviews

Rated by 12 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 101.32
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11739424
Manufacturer Part Number WP22003275
Manufactured by Whirlpool
Product Description

Inner Door - white Specifications

This inner door assembly is twenty-two inches long. It is all white in color and is made of plastic.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Inner Door - white

Replacing your Maytag Washer Inner Door - white
Troubleshooting
This part fixes the following symptoms:
Leaking | Lid or door won’t close
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Crosley.
Part# WP22003275 replaces these:
AP6006351, 22003275
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.6
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 12 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
leaky door
replaced inside of door
  • Morgan from GARDEN RIDGE, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking front door~cause: hamper wires wriping inner plastic door liner
Removed door, changed over parts from one panel to the other, then rehung door....extremely easy! Thanks for the part!
  • Jodi from Ringle, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking down the front of the washer
The inner door panel was damaged by something getting caught in between it and the tub wearing a hole in the plastic.
Remove door hinges.
Remove screws on sides(2 on each hinge)and 4 on otherside and 2 on bottom.
Pull inner door panel (plastic) out.
Remove doorlatch by flipping up center tab and squeezing sides together.
Remove metal tabs by tilting up the backside and tilting down the front (screw hole side) and pulling through the back.

Reverse for reassembly - relatively easy.
  • David from Gibsonia, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door shroud had cracks and was leaking water
Removed and replaced old shroud with new one. Works great.
  • BENNIE from FT WALTON BCH, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
An object had gotten wedged between the inner door and the spinning drum causing the grommet to wear down while spinning and the inner door to crack allowing water to trickle down the front of the washer. (word to the wise-never put a hard athletic support cup into a front loading washer)
I ordered the grommet and inner door on a Tuesday and had both parts at my door step the following day. Including shipping it was only $64.00. With only a screwdriver in hand and 45 minutes of time I removed four screws to take the entire door off. I then removed the inner door and vent tube and grommet (very easy). After placing the new grommet into the new inner door I inserted the vent tube and screwed everything back together.
The repair man would have charged $90 for the labor and the parts which he would have had to order would have been extra.
Other Parts Used:
Inner Door - white Vent Tube Grommet
  • Anna from Gibbstown, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak on bottom outer door
Removed outer door and positioned it on counter next to new part.
Transitioned each part element from from one to the other.
Finally re-install door back in place..........
  • CHRIS from STERLING HEIGHTS, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the inner door was leaking
First I remove the 2 screws that hold the door on then put it on the table on a towel not to scratch the door and unscrewed the inner door and changed it out easy stuff.
  • William from Downers Grove, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The inner door was dammage with a hole so we needed a new inner door.
Remove the ten screws to the inner door to remove it. There are components in the inner door that we didn't think would be there. Take out the components on the inside of the inner door. The areas where the ten screws go in have the small metal plates that we needed to be transferred to the new inner door. Otherwise the screws will not fit. It flips out. That's the part that took us a while to figure out but it came out easily. The other parts snaps on and off after the two screws are removed.

Just remember what you removed and where it should go. It takes two people to do the work.
  • Trang-Dai from Houston, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing large object broke inner door
First I removed all the screws, which removed the door. Once the door was off, was able to de-install all the parts of the old door and install on the new door. The engineers that design this, made it to be able to replace easily. Inner door part was replaced in less than 30 mins. The most amazing part was I order the part on Monday and the door was fix on Tuesday before 2:00. I was amazed. Thanks
  • Scott from Allen, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inner door skin worn from carpet backing rubbing in spin cycle.
Ordered part from PARTSELECT.COM, super fast shipping, next day actually, via fed ex. Part was exact replacement with no surprises. Swapped out internal parts snapped door lid cover in and was doing a wash in 15 minutes start to finish.
  • Richard from Seminole, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
September 26, 2017
Want to replace rubber gasket inside door . I will need part and part number also instructions. Model # mah5500bww. Serial # b5785690ge
For model number MAH5500BWW
PartSelect logo
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is the Bellow, PartSelect Number PS2003890.Here is a link to the video on how to install this gasket.https://www.youtube.com/watch?v=3c7vQvxw0OE Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739424
Manufacturer Part Number: WP22003275
Brand
Model Number
Description
Crosley
CAH4205AWW
Washer - Residential
Maytag
MAH21PDA3W
Washer
Maytag
MAH21PDAGW
Washer
Maytag
MAH21PDAWQ
Washer
Maytag
MAH21PDAWW
Washer
Maytag
MAH21PDCXQ
Washer
Maytag
MAH21PDCXW
Washer
Maytag
MAH21PDD3W
Washer
Maytag
MAH21PDDGW
Washer
Maytag
MAH21PDDWQ
Washer
Maytag
MAH21PDDWW
Washer - Commercial
Maytag
MAH21PDDXW
Washer
Maytag
MAH21PNAGW
Washer
Maytag
MAH21PNAWW
Washer
Maytag
MAH21PNDGW
Washer
Maytag
MAH21PNDWW
Washer
Maytag
MAH21PRAWW
Washer
Maytag
MAH21PRDWW
Washer
Maytag
MAH21PSAWW
Washer
Maytag
MAH21PSDWW
Washer
Maytag
MAH5500BWW
Washer - Residential
Maytag
MAH55FLBWW
Washer - Residential
Maytag
MAH6500AWW
Washer - Residential
Maytag
MAH7500AWW
Washer - Residential
Maytag
MAH7550AAW
Washer - Residential
Maytag
MAH7550AGW
Washer - Residential
Maytag
PVTEAT2W
Washer - MAYTAG LAUNDRY
Maytag
PVTEST1W
Washer - MAYTAG LAUNDRY
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service