Inner Door - white WP22003275 | Official Whirlpool Part | Fast Shipping | PartSelect
Inner Door - white – Part Number: WP22003275
Inner Door - white – Part Number: WP22003275 Inner Door - white – Part Number: WP22003275 https://partselectcom.azureedge.net/Schematics/Maytag/LW18-17.gif

Inner Door - white

Product Description

Inner Door - white Specifications

This inner door assembly is twenty-two inches long. It is all white in color and is made of plastic.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Leaking | Lid or door won’t close

This part works with the following products:

Washer.

This part works with the following brands:

Maytag, Crosley.

Part # WP22003275 replaces these:

22003275.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Maytag Washer Inner Door - white

Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 12 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
enrique from crest hill, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WP22003275
inner door was dammaged when i washed my sons football- ribpads.
i removed the door,placed it on the kitchen tabel and removed 8 screws that hold the innerpart to the outer part and exchanged parts . there was a spring and a vent piece that snap on and off too. then i reinstalled the door and ran a load to check for leaks and there were none it was very easy but the best part of the repair was that i ordered the part on saturday nite and recieved it on monday , part select .com i thank you for your excellent service.......
20 of 21 people found this instruction helpful.
Was this instruction helpful to you?
David from Gibsonia, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WP22003275
Water leaking down the front of the washer
The inner door panel was damaged by something getting caught in between it and the tub wearing a hole in the plastic.
Remove door hinges.
Remove screws on sides(2 on each hinge)and 4 on otherside and 2 on bottom.
Pull inner door panel (plastic) out.
Remove doorlatch by flipping up center tab and squeezing sides together.
Remove metal tabs by tilting up the backside and tilting down the front (screw hole side) and pulling through the back.

Reverse for reassembly - relatively easy.
15 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Harry from Potosi, MO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
12002533, 12001930, WP22003275
Door boot tear and softener quick working
The boot tear looked the easiest but turned out to be the toughest.
After removing the door 2 screws, and finding the opposing two screws I removed the face panel.
Removed the two screws located under the face panel directly under the washer top surface. This allows access to the top of the washer. A wire clamp held with a spring holds the boot in place. Remove the spring or roll it over the edge of the front of the washer tub. Two screws hold the sub-face panel onto the carcass of the washer. remove these. The boot comes out easily. Follow the reverse to reinstall. This may sound easy..its not! The problem lies in the wire and spring arrangement. You must hold both ends of the cable in place near the washer drum taughtly but not too tight or the pressure will cause the boot to edge over the washer tub. It became so bad I consulted a Maytag repair guy. He said we use two pair of needle nosed pliers. Tried that caused banged up knuckles and lots of bad words. I made a tool that operates like a pair of scissors holding the wire on one side and the spring on the other. If you are interested you can track me down and I will tell you how. The softener still doesn't work. Drat. I will have to replace the computer next. OUCH
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Anna from Gibbstown, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WP22003275, WP22003075
An object had gotten wedged between the inner door and the spinning drum causing the grommet to wear down while spinning and the inner door to crack allowing water to trickle down the front of the washer. (word to the wise-never put a hard athletic support cup into a front loading washer)
I ordered the grommet and inner door on a Tuesday and had both parts at my door step the following day. Including shipping it was only $64.00. With only a screwdriver in hand and 45 minutes of time I removed four screws to take the entire door off. I then removed the inner door and vent tube and grommet (very easy). After placing the new grommet into the new inner door I inserted the vent tube and screwed everything back together.
The repair man would have charged $90 for the labor and the parts which he would have had to order would have been extra.
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Trang-Dai from Houston, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WP22003275
The inner door was dammage with a hole so we needed a new inner door.
Remove the ten screws to the inner door to remove it. There are components in the inner door that we didn't think would be there. Take out the components on the inside of the inner door. The areas where the ten screws go in have the small metal plates that we needed to be transferred to the new inner door. Otherwise the screws will not fit. It flips out. That's the part that took us a while to figure out but it came out easily. The other parts snaps on and off after the two screws are removed.

Just remember what you removed and where it should go. It takes two people to do the work.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Scott from Allen, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP22003275
Washing large object broke inner door
First I removed all the screws, which removed the door. Once the door was off, was able to de-install all the parts of the old door and install on the new door. The engineers that design this, made it to be able to replace easily. Inner door part was replaced in less than 30 mins. The most amazing part was I order the part on Monday and the door was fix on Tuesday before 2:00. I was amazed. Thanks
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Richard from Seminole, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP22003275
Inner door skin worn from carpet backing rubbing in spin cycle.
Ordered part from PARTSELECT.COM, super fast shipping, next day actually, via fed ex. Part was exact replacement with no surprises. Swapped out internal parts snapped door lid cover in and was doing a wash in 15 minutes start to finish.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
William from Downers Grove, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP22003275
the inner door was leaking
First I remove the 2 screws that hold the door on then put it on the table on a towel not to scratch the door and unscrewed the inner door and changed it out easy stuff.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
CHRIS from STERLING HEIGHTS, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
WP22003275
Water leak on bottom outer door
Removed outer door and positioned it on counter next to new part.
Transitioned each part element from from one to the other.
Finally re-install door back in place..........
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
BENNIE from FT WALTON BCH, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP22003275
Door shroud had cracks and was leaking water
Removed and replaced old shroud with new one. Works great.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
6 Reviews
4.7
out of 5
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11739424
Manufacturer Part Number: WP22003275
Brand
Model Number
Description
Crosley
CAH4205AWW
Washer - Residential
Maytag
MAH21PDA3W
Washer
Maytag
MAH21PDAGW
Washer
Maytag
MAH21PDAWQ
Washer
Maytag
MAH21PDAWW
Washer
Maytag
MAH21PDCXQ
Washer
Maytag
MAH21PDCXW
Washer
Maytag
MAH21PDD3W
Washer
Maytag
MAH21PDDGW
Washer
Maytag
MAH21PDDWQ
Washer
Maytag
MAH21PDDWW
Washer - Commercial
Maytag
MAH21PDDXW
Washer
Maytag
MAH21PNAGW
Washer
Maytag
MAH21PNAWW
Washer
Maytag
MAH21PNDGW
Washer
Maytag
MAH21PNDWW
Washer
Maytag
MAH21PRAWW
Washer
Maytag
MAH21PRDWW
Washer
Maytag
MAH21PSAWW
Washer
Maytag
MAH21PSDWW
Washer
Maytag
MAH5500BWW
Washer - Residential
Maytag
MAH55FLBWW
Washer - Residential
Maytag
MAH6500AWW
Washer - Residential
Maytag
MAH7500AWW
Washer - Residential
Maytag
MAH7550AAW
Washer - Residential
Maytag
MAH7550AGW
Washer - Residential
Maytag
PVTEAT2W
Washer - MAYTAG LAUNDRY
Maytag
PVTEST1W
Washer - MAYTAG LAUNDRY