Install videos!
11739411-1-M-Whirlpool-WP22003059-Remote Style Pump with Motor - 120V 80W
Part Location Diagram of WP22003059 Whirlpool Remote Style Pump with Motor - 120V 80W
See part 005 in the diagram
Replacing your Maytag Washer Remote Style Pump with Motor - 120V 80W
11739411-1-S-Whirlpool-WP22003059-Remote Style Pump with Motor - 120V 80W 360 view
( Grid squares measure 1x1 inch )
11739411-1-S-Whirlpool-WP22003059-Remote Style Pump with Motor - 120V 80W 11739411-2-S-Whirlpool-WP22003059-Remote Style Pump with Motor - 120V 80W 11739411-1-S-Whirlpool-WP22003059-Remote Style Pump with Motor - 120V 80W 360 view
Part Location Diagram of WP22003059 Whirlpool Remote Style Pump with Motor - 120V 80W Replacing your Maytag Washer Remote Style Pump with Motor - 120V 80W
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Remote Style Pump with Motor - 120V 80W WP22003059

★★★★★
★★★★★
1 Review

Rated by 20 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 145.35
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11739411
Manufacturer Part Number WP22003059
Manufactured by Whirlpool
Product Description

Remote Style Pump with Motor - 120V 80W Specifications

This remote style pump and motor assembly with check valve is used for some washing machines. The motor attached to this pump carries 120 volts and 60 hertz.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Remote Style Pump with Motor - 120V 80W

Replacing your Maytag Washer Remote Style Pump with Motor - 120V 80W
Back to Top
Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag.
Part# WP22003059 replaces these:
AP6006338, 22001982, 22002550, 22002794, 22002939, 22003059
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert I - October 29, 2020
  Verified Purchase
Part fit, easy to change.
My washer was not draining. It is older but everything else is working so I ordered this part figuring it was a 90+% chance it was the problem. It was. Easy to change the pump and washer is working great 2 weeks later. Thank you.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 20 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water Pump not draining water; Mother Board burned out with power outage
I hired a Maytag technician.
Other Parts Used:
Remote Style Pump with Motor - 120V 80W Control Board
  • TENCHA from SAN BENITO, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine had been making a howling noise during rinse cycles for several weeks and then suddenly stopped draining.
On-line trouble shooting sites indicated that drain pump was likely culprit. Disconnected pump from hoses and removed and replaced pump. Tub to pump hose had considerable scale in it, so replaced that too. Repair was made easier by removing both the front and back panels of the washer to get best access to hose clamps and pump.
Other Parts Used:
Tub to Pump Hose Remote Style Pump with Motor - 120V 80W
  • Todd from Anchorage, AK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Found Leaky Pump After Repairing Control Board
Removed back cover to gain access to the pump. Disconnect two wires to the pump. Remove hose clamps on inlet and outlet of pump and rotate pump to the left to remove. Installation is the reverse. I would also remove the large discharge hose from the bottom of the drum to make sure you don't have any debris at the inlet of the pump. My pump had a dime, and a bobby pin stuck in it. It was the bobby pin that over time penetrated the pump housing that caused the leak. I ordered the pump with the normal ground rate on a Thursday evening and had the pump it in hand around noon on Saturday. Couldn't ask for better service. The part was an exact factory replacment.
Read less
  • Victor from Woodstock, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer will not drain
Disconnect power. Remove back panel. Use shop vac to remove water from drum. You can also remove one of the agitator fins from the drum (uses 2 TORX screws) to gain access to inner tub drain hole to remove additional water with shop vac and check for obstructions. Remove power wires from pump, noting position of each. Place towel near pump and disconnect input and output hoses. Rotate pump to disengage from slots in base, and remove. Installation is reverse.
Read less
  • Thomas from Rochester, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bad pump
I took off the rear panel and removed the hose clamps and electrical terminals, slid pump out of slot in bottom pan of washing machine. It only took minutes, this was part of a major overhaul. I replaced this as a precautionary measure. Great prices and quick service,
Other Parts Used:
Short Dispenser Door Retaining Pin Hinge Pin Dispenser Lid Door Boot Drain Hose Remote Style Pump with Motor - 120V 80W Dispenser Bezel Drive Belt and Motor Isolator Kit
  • Brandon from Berea, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer not draining
Unplug washer, turn off water, disconnect supply hoses.
Drain washer by removing the one screw holding the hose on the bottom rear of the washer, drop the hose to the floor and let it drain (you may want to take washer outside)
Remove four screws holding rear panel
Locate the pump and disconnect the two wires. Wires can be attached to either terminal when reinstalling, orientation is not important.
Using 5/16 driver, loosen the hose clamps on the inlet and outlet pump hoses then remove hoses from pump.
Twist the pump counter clockwise then pull straight up to remove.
Read less
  • Timothy from Bremerton, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
65 of 68 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not emptying out
Removed back of washer and unscrewed pump band and hose removed pump and replaced pump,replaced hose to new pump,WE really appreciated the fast shipping of the part from your facility.Thank You again
  • Rita from Three Rivers, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Nickel stuck in the drain pump and broke all the blades off.
Had to replace the whole pump as they did not sell just the propeller. Had to use just the motor and propeller and had to use all the housing from the original pump to bolt in correctly, which fortunately it worked.
  • Wes from Pensacola, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer wouldn't drain
The first step to repairing this problem is to remove the hoses and back panel of the washer. Next detach both the hoses attached to the pump ( have some towels handy because their will be a lot of water pouring out of the pump). Before removing any screws on the pump, use a wrench to remove the bottom platform securing the pump inside of the washer. On the the Amana washer there should be about three bolts holding this small platform down. After unscrewing the bolts, unsnap the wire connected to the motor and remove the platform to get the entire pump out of the washer. The next step is to unscrew the screws on the bottom of the platform to release the base of the pump. The next step is to put the new pump on that same platform. FYI the new pump may not fit on the platform. To solve this problem, unscrew the motor/pump(the black thing) from the base holding the motor( the cream or white colored part). Do this step for the old and new motor/pump. Screw your new motor to the old base. Screw the base with the motor attached back on the platform. Connect the wire in the washer back to the motor. Screw the platform back in the washer and reconnect everything that was disconnected to remove the motor/pump. Finally put the back panel back on the washer and run a test cycle. The washer should now be able to drain.
Read less
  • Danvardys from Powder Springs, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water wouldn't drain
Tilt washer onto door with back of washer on top for easier access.
  • Raymond from Berea, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739411
Manufacturer Part Number: WP22003059
Brand
Model Number
Description
Maytag
MAH14PDAAL
Washer - Commercial
Maytag
MAH14PDAAQ
Washer
Maytag
MAH14PDAAW
Washer - Commercial
Maytag
MAH14PDABL
Washer - Commercial
Maytag
MAH14PDABW
Washer - Commercial
Maytag
MAH14PDCBQ
Washer
Maytag
MAH14PDCBW
Washer
Maytag
MAH14PDDWW
Washer
Maytag
MAH14PNAWW
Washer
Maytag
MAH14PRAWW
Washer
Maytag
MAH14PSAAW
Washer - Commercial
Maytag
MAH20PDAWQ
Washer
Maytag
MAH20PDAWW
Washer - Commercial
Maytag
MAH20PDCXQ
Washer
Maytag
MAH20PDCXW
Washer
Maytag
MAH20PNAWW
Washer
Maytag
MAH20PRAWW
Washer
Maytag
MAH20PRDWW
Washer
Maytag
MAH20PSAWW
Washer
Maytag
MAH3000AKW
Washer - Residential
Maytag
MAH3000AWA
Washer - Residential
Maytag
MAH3000AWQ
Washer - Residential
Maytag
MAH3000AWW
Washer - Residential
Maytag
MAH4000AWQ
Washer - Residential
Maytag
MAH4000AWW
Washer - Residential
Maytag
MAH5500AWW
Washer - Residential
Maytag
MHW2000AWW
Washer Dryer Combo
Maytag
MLE19PDAYW
Washer Dryer Combo
Maytag
MLE19PDAZW
Washer Dryer Combo
Maytag
MLE19PDCZW
Washer Dryer Combo - Electric
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Remote Style Pump with Motor - 120V 80W
$ 145.35
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.